Search Results

Search results for "-LED"

Electrical Connector 2P+E Form A with LED + VDR IP65 PG9 24v 110v 230v

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED + VDR for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nVoltage: 24, 110 or 230 volt\nCurrent: 1 Amp maximum\nDesign: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover\nCircuit: RED LED and VDR varistor with bipolar circuit protection, option Yellow or Green LED. \nDrop off delay: 3mSec Max \nPower consumption: 5mAmp Maximum Resistance, 4 mOhm maximum. \nConduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed\nSeals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. \nResistance: 4 mOhm Max.\nPosition: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),\nCentral fixing screw: steel 4.8 zinc plated\nContacts: CuZn, Sn/Cu plated\nTemperature: -25°C to +125°C\nCircuit 03\n\n2022 PCB adjusted to the new terminal block, LED will be SMD, \n24v 611-201-0152\n110v 611-201-0153\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

2157 in stock Model: DIN2LEDRVDR

Electrical Connector 2P+E Form A with LED IP65 PG9 10-50v or 70-250v

EN 175301-803 (DIN43650A) form A square IP65 connector with bipolar LED\n28mm square with 2 pins + earth pins 18mm\nConduit entry: PG9 (Cable 6-8mm)\nVoltage 10 to 50 volt or 70 to 250 volt\nMax voltage 250v AC, 300v DC\nMax operating current 10 Amp, Max current 16 Amp\nProtection: IP65 EN 60529 (DIN40050)\nInsulation class: C - VDE 0110\nWorking Temp: -25C to +90C\nTransparent housing: PA\nContact material: CuZn (Au)\nConnector: PA66 + 30% FV

1025 in stock Model: DIN2-LED-AC, DIN2-LED-DC

Electrical Connector 2P+E Industrial Form B with LED + VDR IP65 24v 110v 230v

DIN1LEDVDR IP65 EN 175301-803 (DIN43650B) Industrial Form Hirschmann Connector, with Red LED + VDR, 11mm between pins\nGland: PG9 for cable diameter 6mm to 8 mm\nVoltage: 24, 110 or 240 Volt AC/DC\nResistance: 4 mOhm Max\nCurrent: 1 Amp maximum.\nConnection: DIN43650B industrial form is with PG9 cable entry for 6 to 8mm\nGasket: NBR\nProtection: IP65\nWire connection: clamping contact.\nLED and VDR varistor drop off delay max 3mSec power consumption 5mAmp c/w wrong polarity protection\n\n2022 PCB adjusted to the new terminal block, LED will be SMD\n24v 612-201-0100\n230v 612-201-0306\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

785 in stock Model: DIN1LEDRVDR

Electrical Connector 2P+E Form A with LED IP65 PG9 24v 110v 230v

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nVoltage: 24, 48, 120 or 230 volt\nCurrent: 1 Amp maximum\nDesign: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover\nCircuit: RED LED bipolar circuit protection, option Yellow or Green LED. \nDrop off delay Max 3mSec \nPower consumption: 5mAmp Maximum \nResistance 4 mOhm maximum. \nConduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed\nSeals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. Resistance 4 mOhm Max.\nPosition: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),\nCentral fixing screw: steel 4.8 zinc plated\nContacts: CuZn, Sn/Cu plated\nTemperature: -25°C to +125°C\nCircuit 01\n\n2022 PCB adjusted to the new terminal block, LED will be SMD, part numbers \n24v 611-201-0147\n110v 611-442-0504\n230v 611-442-0505\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

641 in stock Model: DIN2LEDR+voltage

Electrical Connector 2P+E Form A with LED IP65 PG6 230v

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nVoltage: 230 volt\nCurrent: 1 Amp maximum\nDesign: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover\nCircuit: RED LED bipolar circuit protection.\nDrop off delay Max 3mSec\nPower consumption: 5mAmp Maximum\nResistance 4 mOhm maximum.\nConduit entry: PG6 (cable 4 to 6mm)\nSeals: NBR LABS-free 6 Grommet, gasket and cover gasket), max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. Resistance 4 mOhm Max.\nPosition: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),\nCentral fixing screw: steel 4.8 zinc plated\nContacts: CuZn, Sn/Cu plated\nTemperature: -25°C to +125°C\nCircuit 01

135 in stock Model: DIN2LEDR-PG5-230vAC