Search Results

Search results for "IT"

Electrical Connector 2P+E Form A without circuit IP65 PG9 0-250v

EN 175301-803 (DIN43650A) square electrical connector without circuit for solenoid valves,\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nConduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed\nVoltages: 0 to 250 volts AC/DC\nCurrent: 16 Amp maximum\nCircuit: non\nProtection: IP65\n\n2022 model updated with new terminal block, new reference 611-201-0063\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

4189 in stock Model: DIN2

Electrical Connector 2P+E Industrial Form B without circuit IP65 0-250v

EN 175301-803 (DIN43650B) Industrial Form Hirschmann Connector, 11mm between pins\nGland: PG9 for cable diameter 6 to 8mm \nVoltage: 0 to 250 Volts\nResistance: 4 mOhm Max\nCurrent: 10 Amps max (without circuit), 1 Amp maximum with circuit. \nConnection: DIN43650B industrial form is with PG9 cable entry for 6 to 8mm\nGasket: NBR\nProtection: IP65\nWire connection: clamping contact. \nOption: conduit entry 5 to 6mm or 1/2 NPT conduit entry, with LED, with VDR varistor and Rectified \n\n2022 new terminal block\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

2247 in stock Model: DIN1

Electrical Connector 2P+E Form A with LED + VDR IP65 PG9 24v 110v 230v

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED + VDR for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nVoltage: 24, 110 or 230 volt\nCurrent: 1 Amp maximum\nDesign: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover\nCircuit: RED LED and VDR varistor with bipolar circuit protection, option Yellow or Green LED. \nDrop off delay: 3mSec Max \nPower consumption: 5mAmp Maximum Resistance, 4 mOhm maximum. \nConduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed\nSeals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. \nResistance: 4 mOhm Max.\nPosition: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),\nCentral fixing screw: steel 4.8 zinc plated\nContacts: CuZn, Sn/Cu plated\nTemperature: -25°C to +125°C\nCircuit 03\n\n2022 PCB adjusted to the new terminal block, LED will be SMD, \n24v 611-201-0152\n110v 611-201-0153\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

2157 in stock Model: DIN2LEDRVDR

Male stud push-in airline fitting M5 to 1/2 BSP 4mm to 12mm NPC

Pneumatic Push-in x BSPT Male Straight Connector\n\nMetric Tube Sizes 4mm, 6mm, 8mm, 10mm or 12mm to M5, 1/8, 1/4, 3/8 or 1/2 BSP thread\n\nOne Touch push to connect configuration allow an instant tubing connection\n\nStrong Nickel Plated Brass sleeve disconnection by pressing the sleeve and then simply removing the tube from the fitting\n\nMale thread is Teflon treated ready for use\n\nNickel Plated Brass body ensures anti contamination\nFor use in pneumatic systems upto 9 Bar with maximum temperature of 60 degrees Celsius

1527 in stock Model: NPC

15mm Water solenoid valve 0.2-10 Bar Nylon 6v Latching 1175BB

15mm WRAS latching water solenoid valve RPE 1175BB\nFunction: 2/2 way latching / bi-stable (20mSec pulse)\nOperation: Pressure assisted (Requires Min 0.2 Bar pressure difference)\nPort: 15mm john guest speed fit / quick coupling.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nKv flow factor: 27.07 L/Min based on water with 1 Bar pressure difference.\nBody: Nylon white good grade GF\nCoil: R 2.25 Watts IP00 with 6.3x0.8mm faston tags\nVoltage: 6vDC (375mAmp 15 to 20 millisecond pulse), will accept 9 volt and 12 volt with shorter pulse.\n\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), MOCA FCM (Food Contact Materials), NSF food certification for public health protection and option for UL Underwriter Laboratories certified.\n\nThis RPE R Mini 117 solenoid valve requires short (15mSec) low power pulse to stay open and then a short reverse polarity (15mSec) power pulse to neutralise the internal magnet for the valve to stay closed thus minimising the power required. Repeating this process to open and close.

1258 in stock Model: 1175BB