Search Results

Search results for "520"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

15mm Water solenoid valve 0.2-10 Bar Nylon 6v Latching 1175BB

15mm WRAS latching water solenoid valve RPE 1175BB\nFunction: 2/2 way latching / bi-stable (20mSec pulse)\nOperation: Pressure assisted (Requires Min 0.2 Bar pressure difference)\nPort: 15mm john guest speed fit / quick coupling.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nKv flow factor: 27.07 L/Min based on water with 1 Bar pressure difference.\nBody: Nylon white good grade GF\nCoil: R 2.25 Watts IP00 with 6.3x0.8mm faston tags\nVoltage: 6vDC (375mAmp 15 to 20 millisecond pulse), will accept 9 volt and 12 volt with shorter pulse.\n\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), MOCA FCM (Food Contact Materials), NSF food certification for public health protection and option for UL Underwriter Laboratories certified.\n\nThis RPE R Mini 117 solenoid valve requires short (15mSec) low power pulse to stay open and then a short reverse polarity (15mSec) power pulse to neutralise the internal magnet for the valve to stay closed thus minimising the power required. Repeating this process to open and close.

1258 in stock Model: 1175BB

Solenoid Coil Core 13.2mm, H 38.7mm, W 36mm, L 47.3mm, 31400

Solenoid valve coil 36mm width, model 31400\nInsulation: Class F 155°C or class H 180°C\nConnection: DIN43650A\nBore: 13.2mm\nHeight: 38.7mm\nWidth: 36mm\nLength: 47.3 mm\nPower DC: 22 to 27 Watts according to voltage.\nPower AC: 26VA holding. \nVoltages: 12vDC, 24vDC, 48vDC, 80vDC and 200vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz\nResistance: \n12vDC 5Ω\n24vDC 26.6Ω\n110vAC 97Ω\n220vAC 402Ω

768 in stock Model: 31400

1 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Open NOPU22508

1 inch normally open Brass solenoid valve Model NOPU225A-08 (PU225AN-08)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1 BSP, option NPT thread\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

455 in stock Model: NOPU22508

1/4 Brass Solenoid Valve 0-10 Bar 2/2 N/Closed AD8 3,4+5mm

1/4 inch Brass solenoid valve CS Fluid Power AD8A, AD8B + AD8C.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSPT, option NPT thread\nPressure: 0 to 10 Bar according to voltage and orifice\nVacuum: 0 to -101kPa (relative 757.56 mmHg) or 99.67% vacuum\nBody: Brass\nInternals: stainless steel\nOrifice: 3mm (AD8A), 4mm (AD8B) and 5mm (AD8C).\nFlow: 3.71 to 9.2 L/Min according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM (Optional EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR)\nMedia: air, water, light oils, high vacuum (-101kPa) and most other fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt UL, CSA, IP66 CE approved Class H 100% duty rated DIN43650A\nProtection: IP65 with LED connector (Included)\nCoil Option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltage: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Override, degreased for oxygen use.\n\nThe AD8 series is a pure direct acting valve that is ideal for vacuum, low to medium pressures as an ideal general purpose solenoid valve.

451 in stock Model: AD8