WRAS & WRc approved solenoid valves

Potable water or Drinking WRAS water solenoid valves that connect directly to UK and Euro zone mains water supply require the appropriate water approvals. The UK accepted approvals are WRAS (Water Regulations Advisory Scheme) and WRc (Water Research Centre) and within the rest of the Euro zone require DVGW and KTW approvals which may include the homogenisation's of UNI EN 681-1/2003 WB e WA, DVGW W270, DVGW W534, CLP, ACS, KIWA, TGM-LMG 75.

WRAS approved solenoid valves for mains water applications are available in most sizes from ¼” through to 2" thread for both 2/2 way normally closed and normally open that fully conform to the water regulations with elastomer seals conforming to BS6920 (Test for water quality) and have passed the vigorous testing of 200,000 open / closed cycles at maximum pressure and temperature and a final 150% over pressure leak and temperature test. See below valves with WRAS approval:

Useful links: https://www.wras.co.uk

http://www.wrcapproved.com


WRc approval.

WRc Approval ® "fit for purpose" certification is a voluntary scheme conducted by the Water Research centre to help solenoid valve and other water equipment suppliers and manufacturers demonstrate quality of manufacturing and performance. More importantly products used on water applications that conform to WRc quality, installation and performance will protect our delicate drinking water system from dangerous and harmful debris, chemicals and solvents which could leach dangerously back into the water system and be consumed.

WRc ™ approval and certification offers value to International, Euro Zone and UK companies with existing approvals from USA, Holland, Japan, France, Austria, New Zealand, Australia and Germany.

WRAS approved solenoid actuated valves either brass, stainless steel or plastic for use with UK, England, Ireland, Scotland and Wales mains water, potable water and potable drinking water systems. Zero Rated - valve operates from vacuum to maximum working pressure, Pressure assisted - valve requires minimum pressure difference between inlet and outlet port. Sizes 1/4-2" thread & speed fit 6,8,10 and 15mm or 1/4, 3/8 &1/2".


View all WRAS solenoid valves here.


Normally Closed - (Failsafe Closed power to Open)



RPE 1136 6mm WRAS Approved solenoid valve.
Port: 6mm Push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE 1145BC 8mm WRAS Approved solenoid valve.
Port: 8mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE 1156BC 10mm WRAS Approved solenoid valve.
Port: 10mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 3105BC 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 3115BC 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1186BC 1/4 WRAS Approved solenoid valve.
Port: 1/4 Push Fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1196BC 3/8 WRAS Approved solenoid valve.
Port: 3/8 Push Fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 4105BC 3/8 WRAS Approved solenoid valve.
Port: 3/8" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 4115BC 3/8 WRAS Approved solenoid valve.
Port: 3/8" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 5105BC 1/2 WRAS Approved solenoid valve.
Port: 1/2" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 5115BC 1/2 WRAS Approved solenoid valve.
Port: 1/2" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1175BC 15mm WRAS Approved solenoid valve.
Port: 15 mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 6115BC 3/4 WRAS Approved solenoid valve.
Port: 3/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE S180 3/4 single WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE D180 3/4 double WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE S90 3/4 single WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE D90 3/4 double WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



Brass WRAS certified solenoid valves


Shako PU220D-03 3/8 BSP WRAS Approved solenoid valve.
Port: 3/8 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-03 3/8 BSP WRAS Approved solenoid valve.
Port: 3/8 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-04 1/2 BSP WRAS Approved solenoid valve.
Port: 1/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-04 1/2 BSP WRAS Approved solenoid valve.
Port: 1/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-06 3/4" BSP WRAS Approved solenoid valve.
Port: 3/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-06 3/4" BSP WRAS Approved solenoid valve.
Port: 3/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-08 1" BSP WRAS Approved solenoid valve.
Port: 1 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-08 1" BSP WRAS Approved solenoid valve.
Port: 1 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-12 11/4" BSP WRAS Approved Solenoid Valve
Port: 11/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-14 11/2" BSP WRAS Approved Solenoid Valve
Port: 11/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Shako PU225D-20 2" BSP WRAS Approved Solenoid Valve
Port: 2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed



Normally /Open - (Failsafe Open power to Close).

RPE 3115BA 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 3105BA 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 4115BA + 4105BA 3/8" BSP and 5115BA + 5105BA 1/2", 6115BA 3/4" WRAS Approved solenoid valve.
Port: 3/8, 1/2 & 3/4" BSP male and 3/8, 1/2" female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 1136BA 6mm, 1145BA 8mm, 1156BA 10mm, 1175BA 15mm, 1186BA 1/4" and 1196BA 3/8" push fit WRAS Approved solenoid valve.
Port: 6mm, 8mm, 10mm, 15mm, 1/4" and 3/8" speed fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-03 3/8 BSP WRAS Approved Solenoid Valve
Port: 3/8 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-04 1/2 BSP WRAS Approved Solenoid Valve
Port: 1/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-06 3/4 BSP WRAS Approved Solenoid Valve
Port: 3/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-08 1 BSP WRAS Approved Solenoid Valve
Port: 1 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-12 11/4 BSP WRAS Approved Solenoid Valve
Port: 11/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Shako PU225DN-14 11/2 BSP WRAS Approved Solenoid Valve
Port: 11/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open



Shako PU225DN-20 2 BSP WRAS Approved Solenoid Valve
Port: 2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Latching (bi-stable) WRAS Solenoid Valves


Latching solenoid valves require only a short electrical pulse to stay open and then a reversed polarity power pulse to stay closed. 


RPE 1136BB 6mm WRAS Approved solenoid valve

Port: 6mm Push fit

Body: nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 1145BB 8mm WRAS Approved solenoid valve

Port: 8mm Push fit

Body: Nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 1156 BB 10mm WRAS Approved solenoid valve

Port: 10mm Push fit

Body: Nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 1175BB 15mm WRAS Approved solenoid valve

Port: 15mm Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 1186BB 1/4 inch WRAS Approved solenoid valve

Port: 1/4 inch Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 1196BB 3/8 inch WRAS Approved solenoid valve

Port: 3/8 inch Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 3115BB 1/4 BSP WRAS Approved solenoid valve

Port: 1/4 BSP Male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 3105BB 1/4 BSP WRAS Approved solenoid valve

Port: 1/4 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 4115BB 3/8 BSP WRAS Approved solenoid valve

Port: 3/8 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 4105BB 3/8 BSP WRAS Approved solenoid valve

Port: 3/8 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 5115BB 1/2 BSP WRAS Approved solenoid valve

Port: 1/2 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar




RPE 5105BB 1/2 BSP WRAS Approved solenoid valve

Port: 1/2 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 6115BB 3/4 BSP WRAS Approved solenoid valve

Port: 3/4 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar





Shako LPU225D-03 3/8 BSP WRAS Approved solenoid valves

Port: 3/8 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar






Shako LPU225D-04 1/2 BSP WRAS Approved solenoid valves

Port: 1/2 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar





Shako LPU225D-06 3/4 BSP WRAS Approved solenoid valves

Port: 3/4 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar





Shako LPU225D-08 1 BSP WRAS Approved solenoid valves

Port: 1 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar





Shako LPU225D-12 11/4 BSP WRAS Approved solenoid valves

Port: 11/4 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar





Shako LPU225D-14 11/2 BSP WRAS Approved solenoid valves

Port: 11/2 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar





Shako LPU225D-20 2 BSP WRAS Approved solenoid valves

Port: 2 inch BSP, NPT or Flanged.

Body: Brass, Seals EPDM

Voltage: 6vDC or 12vDC, Pressure 0.5 - 10 Bar







WRAS Approved Motor actuated ball valves


ABVM02SABVM02S 

1/4 BSP mini ABVM02S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 5 watt 5 second IP67 mini actuator's voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals PTFE.


ABVM03S

ABVM03S 

3/8 BSP mini ABVM03S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 5 watt 5 second IP67 mini actuator's voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.


ABVM04S

ABVM04S 

1/2 BSP mini ABVM04S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 5 watt 5 second IP67 mini actuator's voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.


ABVM06S

ABVM06S 

3/4 BSP mini ABVM06S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 5 watt 5 second IP67 mini actuator's voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.


ABVM08S

ABVM08S 

1 BSP mini ABVM08S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 5 watt 5 second IP67 mini actuator's voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.



ABV12S

11/4BSP mini ABV12S electric actuated WRAS approved ball valve with visual position indicator, manual override and position feedback with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 22 watt 10 second IP67 compact actuator's voltage options 12 to 24 volt DC or 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.





ABV14S

11/2BSP mini ABV14S electric actuated WRAS approved ball valve with visual position indicator, manual override and position feedback with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 22 watt 10 second IP67 compact actuator's voltage options 12 to 24 volt DC or 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.






ABV20S

2 BSP mini ABV20S electric actuated WRAS approved ball valve with visual position indicator, manual override and position feedback with control options Failsafe Closed, Failsafe Open, Power Open/Power Close and modulating control.

The Low power 22 watt 10 second IP67 compact actuator's voltage options 12 to 24 volt DC or 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals EPDM + PTFE.





You can view all the motor actuated ball valves here, including WRAS approved valves, 3 piece stainless steel ball valves and modulating control electrically actuated ball valves.


Air operated WRAS approved Nickel Plated Brass screwed 2-way 10 Bar ball valve with PTFE seals.

Ball Valve: ISO5211 direct mount (F03/F05)

WRAS approved certificate number 2012107
Port sizes: 1/2, 3/4, 1, 11/4, 11/2 and 2 BSP thread
Body: Nickel plated Brass
Pressure: 0 to 40 Bar
Temperature rating: 0 to +90°C Max
Seals: PTFE + VITON (WRAS Approved)
Media: air, water and other media suitable with stainless steel, VITON + PTFE.


Actuator: ISO5211 direct mount (F03/F05) with 2 colour visual position indicator

Rack + pinion pneumatic actuator, 90-degree anticlockwise rotation, two external travel stops allowing for +/- 5 degree adjustment for both open and closed position.
Air supply port 1/4 BSP and Namur (VDI-VDE3845) for mounting similarly compliant controllers.
Compressed air supply 4 to 6 Bar (30 micron filtered + dry)
Body: Hard anodised aluminium alloy with epoxy coated die-cast aluminium alloy end caps.


Option: Spring return (air move / spring return) or double acting (air open / air close)


Supplied fully assembled and 100% function tested prior to shipping. (Push fittings + silencers used for bench testing can be removed to install Namur solenoid controller.)

View and order online.