Search Results

Search results for "ABV12S"

11/4 BSP Motor ball valve WRAS 12-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABV12S

11/4 BSP motor actuated WRAS stainless steel ball valve ABV12S-E2-MO.\n\nActuator:\nTorque: 16-27NM\nCycle life: 70,000 open/close\nPower: 10.3 Watts\nOpen or close time: 10 seconds\nProtection: IP67\nMounting: ISO5211 F03 + F05\nTemperature: -15°C to +60°C ambient\nVoltages 12vDC-24vDC+24vAC or 110-240vAC with multi voltage technology.\n\nControl option: Failsafe closed, Failsafe Open or Power Open/Power Close.\n\nIncludes: \nVisual position indication\nManual Override (with Allen key provided)\nE2 position feed back switches. (Volt free, no voltage is supplied from the actuator. 36v or 220v, 0.4 Amp Max).\n\nBall valve:\nWRAS approved certificate number 2012107\n11/4 BSP thread, option NPT thread\nBore: 32mm\nBody: 304 stainless steel\nPressure: 0 to 10 Bar \nTemperature rating: 0 to +90°C Max\nSeals: PTFE + EPDM WRAS Approved\nMedia: air, water and other media suitable with stainless steel, EPDM + PTFE.\n\nOptions to choose:\na. Failsafe Closed = Power +ve Red; -ve Black valve will open, Power OFF will automatically close with reserve power. \n\nb. Failsafe Open = Power +ve Red and -ve Black valve will close, Power OFF will automatically Open with reserve power. \n\nFailsafe actuators require 30 second power ON to charge reserve power.\nWill draw less than 0.5 Watt when powered and not moving.\nE2 volt free open + closed position feedback 3 wires (Green + Yellow and common White)\n\nc. Power Open/Power Close = Connect Red +ve and Black -ve, Green is the control wire.\nPower to GREEN valve opens, remove power from GREEN valve closes.\nE2 volt free open + closed position feedback 4 wires (Blue + Grey and Yellow + White)\n\nDestruction Test.\nOn the 1st November 2020 at around 5PM we connected an ABV-E2-MO/9AR to a dry 11/2 BSP stainless steel ball valve with 12-24vDC-24vAC failsafe closed actuator. We then connected our SVDT22 (digital cycle timer) set to 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (Except holidays)\n\nIn October 2022 the valve finally failed after 977,762 open and close cycles.

51 in stock Model: ABV12S-E2-MO

11/4 BSP Modulating WRAS Ball Valve 4-20mA, 0-10V or 0-5v ABVM9-12S

Modulating 11/4 BSP motor actuated WRAS stainless steel ball valve ABVM9-12S.\nActuator:\nTorque: 16-27NM\nCycle life: 70,000 open/close\nPower: 10 Watts \nFully Open or close time: 12 seconds\nProtection: IP67\nMounting: ISO5211 F03 + F05\nTemperature: -15°C to +60°C ambient\nVoltage: 12-24vDC multi voltage technology.\n\nIncludes:\nVisual position indication\nManual Override (with Allen key provided)\nPosition feed back and error warning signal\n\nBall valve:\nWRAS approved certificate number 2012107\n11/4 BSP thread, option NPT thread\nBore: 32mm\nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nTemperature rating: 0 to +90°C Max\nSeals: PTFE + EPDM (WRAS Approved)\nMedia: air, water and other media suitable for the materials of construction.\n\nControl options to choose:\na. 4-20mA modulating control.\nb. 0-5 volt modulating control\nc. 0-10 volt modulating control\n\nConnect Power +ve Red & -ve Black (12 to 24vDC)\n\nStatus signal Yellow, output 3.3v=OK, Output 0v=Fault.\n\nInput signal 4-20mA (Option 0-5/0-10v), Green +ve\n\nPosition feed back output signal 4-20mA White +ve \n\nCommon feedback -ve Blue

50 in stock Model: ABV12S/9M

11/4 BSP Electrically Actuated Ball Valve Stainless Steel Failsafe 9-24vAC/DC

11/4 Inch Motor actuated stainless steel ball valve ABV12S/9AR-E2, 9-24 volt AC/DC\nActuator:\nCycle life: 50,000 open/close\nPower: 22 Watts when moving\nOpen or close time: 15 seconds\nProtection: IP67\nTemperature: -15°C to +50°C ambient\nVoltage: 9 to 24 volt AC/DC with multi voltage technology.\nControl option: Failsafe closed or Failsafe Open.\nIncludes: visual position indication and E2 volt free position open and closed feed back switches.\n\nBall valve:\n11/4 BSP thread,\nBore: 32mm\nBody: 304 stainless steel\nSeals: PTFE + EPDM (WRAS approved)\nPressure: 0 to 10 Bar\nTemperature rating 0 to +90°C Max\n\nOptions to choose:\nFailsafe Closed = Power ON will open - Power OFF will automatically close with reserve power.\n\nFailsafe Open = Power ON will Close, Power OFF will automatically Open with reserve power.\n\nFailsafe actuators require initial 30 second power ON when new to charge reserve power, thereafter a minimum 10 Seconds.\nWill draw less than 1 Watt when powered and not moving.\n\nVoltage: 9 to 24 volt AC/DC with multi voltage technology.\n\n\nNow replaced with ABV12S-MO valve, so on special offer so when these are gone - they are gone.

11 in stock Model: ABV12S/9AR-E2

11/4 Motor actuated ball valve FKM seals 12-24vAC/DC or 110-240vAC 10 Bar ABV12SV

11/4 BSP motor actuated stainless steel ball valve with FKM + PTFE seals ABV12SV-E2-MO.\n\nActuator:\nTorque: 16-27NM \nCycle life: 70,000 open/close\nPower: 10 Watts \nOpen or close time: 10 seconds\nProtection: IP67\nMounting: ISO5211 F03 + F05\nTemperature: -15°C to +60°C ambient\nVoltages 12vDC-24vDC+24vAC or 110-240vAC with multi voltage technology.\n\nControl option: Failsafe closed, Failsafe Open or Power Open/Power Close.\n\nIncludes:\nVisual position indication\nManual Override (with Allen key provided)\nE2 position feed back switches. (Volt free, no voltage is supplied from the actuator. 36v or 220v, 0.4 Amp Max).\n\nBall valve:\n11/4 BSP thread, option NPT thread\nBore: 32mm\nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nTemperature rating: 0 to +90°C Max\nSeals: PTFE + FKM\nMedia: gases + fluids suitable with stainless steel, FKM + PTFE.\n\nOptions to choose:\na. Failsafe Closed = Power +ve Red; -ve Black valve will open, Power OFF will automatically close with reserve power.\n\nb. Failsafe Open = Power +ve Red and -ve Black valve will close, Power OFF will automatically Open with reserve power.\n\nFailsafe actuators require 30 second power ON to charge reserve power.\nWill draw less than 0.5 Watt when powered and not moving.\nE2 volt free open + closed position feedback 3 wires (Green + Yellow and common White)\n\nc. Power Open/Power Close = Connect Red +ve and Black -ve, Green is the control wire.\nPower to GREEN valve opens, remove power from GREEN valve closes.\nE2 volt free open + closed position feedback 4 wires (Blue + Grey and Yellow + White)

10 in stock Model: ABV12SV-E2-MO

11/4 BSP Electrically Actuated Ball Valve Stainless Steel Power Open/Close 24vDC

11/4 Inch Motor actuated stainless steel ball valve ABV12S/9-E2\nActuator:\nCycle life: 50,000 open/close\nPower: 22 Watts when moving\nOpen or close time: 15 seconds\nProtection: IP67\nTemperature: -15°C to +50°C ambient\nVoltage: 24 vDC.\nControl: Power Open / Power Close.\nIncludes: visual position indication and E2 volt free position open and closed feed back switches.\n\nBall valve:\n11/4 BSP thread,\nBore: 32mm\nBody: 304 stainless steel\nSeals: PTFE (WRAS approved)\nPressure: 0 to 10 Bar\nTemperature rating 0 to +90°C Max\n\n\n3 Wire Control = Connect Red +ve and Black -ve, Green is the control wire.\nPower to GREEN valve opens or power off GREEN valve closes.\n\nVoltage: 24 volt DC.\n\nNow replaced with ABV12S-MO valve, so on special offer so when these are gone - they are gone.

9 in stock Model: ABV12S/9-E2