Search Results

Search results for "108-030-0267"

Nass Magnet Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 12v to 380v

Nass Magnet Solenoid Valve Coil System 13/30\nBore: 14.6mm, top plate 10mm\nHeight: 42mm\nWidth: 30mm\nLength: 39mm\nED 100%, Class H, protection according to EN 60529 IP65 with connector.\nConnection: according to: DIN EN 175301803-A\nMaterial: Thermoset resin\nVoltage tolerance: -10% to +10%\nAmbient Temperature: -20°C +50°C\n\nVoltages:\n12vAC 50/60Hz (113-030-0044 or use 12vdc with bridge rectifier connector)\n12vDC 15 Watt 9.7Ω, (113-030-0047, previously 2506442)\n24vAC 19.3VA 6.2 Ω, (113-030-0040, previously 0543 00.1-00/5768, 25002865)\n24vDC 15 Watt 37.8 Ω, (113-030-0028, previously 0543 00.1-00/5753, 2503154).\n48vAC 50/60Hz 19VA 24.3 Ω, (113-030-0052, previously 2507966)\n48vDC 10.9 Watts 20.5 Ω, (113-028-0044)\n64vAC 37.8 Ω\n110vAC 50/60Hz 17.6VA 135 Ω (113-030-0037, Previously 054300.1-00/6869, 2502864)\n110vDC 17 Watts 69 Ω, (113-030-0053, previously 25010353)\n220vDC 18 Watt 338 Ω, (113-030-0051)\n240vAC 50/60Hz, 17.6VA 701 Ω, (113-030-0203)\n380vAC 22VA 2002 Ω, (previously 0543 00.1-00/6755, 25007935)\n\nFits all Shako solenoid 2/2 way 3/8 to 2\" valves: PU220A, PU225A, PU225D, PU225DN, PU225S, PU225H, PU225X, SPU220 and SPU225 series

6281 in stock Model: 22003

Nass Magnet ATEX Coil Core 9/8mm, H 29.5mm, W 22mm, L 28.8mm

ATEX Solenoid Valve Coil System 8/22 Exm IIC T4 Nass Magnet 108-030 (Previously 0513 00 to 0513 49 and 1213 00 to 1213 49)\nWidth: 22mm\nManufacturer: Nass Magnet system 8/22 ATEX\nProtection by encapsulation ll 2 G Ex mb IIC T4 Gb and ll 2 D Ex mb tb IIIC T130°C Db IP65\nRelated certificate: IECEx PTB 05.0005 X, IECEx PTB 05.0006 X \nPrevious versions: IECEx PTB 08.0023 issue: 0, IECEx PTB 08.0023 issue: 1, IECEx PTB 08.0023 issue: 2.\n\nConnection type: three-wired cable, with sleeve\nMoulding material: thermoplastic\nVoltage tolerance: ± 10 %\nAmbient temperature: -20°C to +50°C (Single Assembly), -20°C to +40°C (Manifold assembly)\nRelative duty cycle: 100 %\nInsulation class of insulating materials according to DIN VDE 0580: F\nDegree of protection: IP 65\nCable length: 3 meter (other cable lengths 5 meter and 10 meter on request)\n\nVoltage/ Nominal Power: 12vDC, Nass Magnet 108 030 1027 (4.7VA), 24vDC Nass Magnet 108 030 1028 (4.6VA), 110vAC Nass Magnet 108 030 0002 (4.5VA), 230vAC Nass Magnet 108 030 0003 (5.1VA)

707 in stock Model: 108 030 1027,108 030 1028,108 030 0002,108 030 0003

ATEX Armature Assembly Normally Closed System 8

Nass Magnet system 8 armature assembly 3/2 or 2/2 way normally closed suitable for power level 1 Exia 24vDC coil\n\nTube: Brass\nInternals: stainless steel\nSeal: NBR\nInlet orifice: 0.6mm\nExhaust orifice: 0.8mm\nPressure: 8 Bar Max differential, Max Working 12 Bar\n\nSuits the PU221 and PU321 ATEX EExiaIICT4/T6 2/2 and 3/2 way normally closed valves.\n

169 in stock Model: 108-010-0084

ATEX Exia 2/2 3/2 Solenoid Valve Brass 1/8 1/4 0-12 Bar Intrinsically safe 0.8mm 24vDC

ATEX Ex ia 1/8 1/4 intrinsically safe solenoid valve PU221 / PU321\n\nFunction: 3/2 way normally closed PU321 (option 2/2 way PU221)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 8 Bar differential, Max working 12 Bar\nOrifice: 0.8mm\nKv flow factor: 0.3 L/min based on water with a 1 Bar pressure difference.\nSeals: NBR\nMedia: air and other inert gases compatible with materials of construction.\n\nConsisting of:\n\nArmature: Nass Magnet 108 010 0084 ATEX stainless steel assembly (previously 1237 07.6-00) (108-010-0084)\nConnector: Nass Magnet ATEX connector 611 201 1317 (previously 611-201-1291).\n\nCoil: Nass Magnet 108 030 1088 Exia IIC T6 (Previously 125930.1-00/5146), Ambient -40°C to +50°C.\nor\nCoil: Nass Magnet 108 030 0244 Exia IIC T4 (Previously 125950.1-00/5146), Ambient -40°C to +85°C.\n\nVoltage: 24vDC\nPower: 1.6 Watt

81 in stock Model: PU221, PU321

Nass Magnet ATEX Coil Ex ia IIC Core 9/8mm, H 29.5mm, W 30mm, L 28.8mm

ATEX Intrinsically Safe Solenoid coil system 8 ATEX, Width: 30mm\n\nEX i Solenoid Operator Type 1259\nCertification number: PTB 02 ATEX 2154, IECEx PTB 08.0023.\nApplied standards: EN 60079-0:2012+A11:2013, IEC 60079-0:2011(Ed.6), EN 60079-11:2012, IEC 60079-11:2011 (Ed 6).\n\nSolenoid operator 108-030-1083 (Previously 1259 00 to 1259 49) temperature class T6 Ambient -40°C to +50°C, Maximum media: +70°C\n\nSolenoid operator 108-030-1088, (Previously 1259 50 to 1259 99) temperature class T4 Ambient -40°C to +85°C, Maximum media: +80°C\n\nThe solenoid operators are suitable for side-by-side manifold assembly at a 100% duty cycle. \n\nConnection type: Form A EN175301-803-A\nMaterial: Thermoset resin\nVoltage: 24vDC Power level 1\nBarrier: IIC with 115mA 28vDC, IIC with 195mA 32vDC, \nVoltage Tolerance: +/- 10%\nAmbient temperature: -40°C to +50°C\nMedia temperature: +80°C Max\nRelative duty cycle: 100%\nInsulation class of insulating materials according to DIN VDE 0580: Class F\nProtection: IP65. Certification: PTB 02 ATEX 2154, IEC Ex PTB08.0023

48 in stock Model: 108-030-1083,108-030-1088