Pressure Reducing Valve 316 Stainless steel 5 Bar maximum inlet pressure, pressure reducing range 0.2 to 0.02 Bar flange port sizes 1/2", 3/4", 1", 11/2 or 2" BSP/ NPT thread with other special options available upon request. The REMT threaded Direct Acting Micro Pressure Reducing Valve and REMF Flange (DAPRV) body is 316 Stainless Steel and is suitable for most RO water, pure water, water, oil, air, gas and fluid media. The pressure control gate is a balanced-pressure design with an extended diaphragm offering extremely sensitive and very accurate pressure reducing control, the pre-set outlet pressure is not influenced by any unstable and fluctuating inlet pressure and the outlet pressure will maintain at a precise and stable downstream outlet pressure which is displayed by the external pressure gauge. When the outlet pressure changes due to demand the large pressure control chamber design allows the REMT Micro pressure-reducing valve to respond quickly to very accurately to adjust back to the pre-set pressure. The design of the REMT piston UH Ring sealing and large diaphragm offers greatly improved pressure regulation and control.
Z-Tide REMT15S, REMT20S, REMT25S, REMT40S, REMT50S, Micro DAPRV1