Electrically actuated motorised 304 stainless steel 2/2 way ball valve with failsafe position closed port sizes 1/2",3/4",1" BSP thread. This miniature low power electric actuator will work with any voltage from 9 volts to 35 volts AC/DC and 85 volt to 265 volt AC 50/60Hz depending on the model chosen both have a minimal 5 watt current draw and offering a quick 3 to 5 second opening and automatic return 3 to 5 second closing time when power is removed. The IP65 rated actuator is mounted to a full flow 10 bar rated 304 stainless steel ball valve with PTFE seals makes it ideal for dirty or clean water drainage for caravans, canal boats, motor homes, HVAC, solar water heating, solar thermal system, water recycling, rainwater system, BMS building management systems, communal and district heating systems, tenant heat meter services, harvested grey water systems, home energy control systems, building zone applications and heating metering systems.
Apply any 9 to 24 volt AC/DC or 85 to 265 volts AC 50/60Hz electrical supply to the ABVM actuator and the ball valve will quickly open and stay open allowing flow. When electrical power is removed the actuator will automatically close utilising its reserve stored energy. This actuated valve will require an initial 60 second power on for its first open actuation to provide backup power to close. An ideal solution when a solenoid valve is either not suitable or not compatible with the application.
Designed duty cycle for long (1 hour +) periods of electrical power ON for occasional fail safe auto close.
Tower two port zone valve VAL222MV
Danfoss HPA2 2 port motorised valve 087N657900