Search Results

Search results for "267"

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-04 (ATEX option)

1/2 inch Brass solenoid valve Model PU225A-04 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1/2 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

584 in stock Model: PU22504

1/2 Brass Solenoid Valve 0-8.5 Bar 2/2 Normally Closed PU220A-04

1/2 Brass solenoid valve Shako PU220A-04 ®\nFunction: 2/2 way normally closed\nOperation: assisted lift (zero-rated)\nPort: 1/2 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 5 Bar (DC voltage)\nVacuum: 80% vacuum -0.8 Bar Max\nBody: Brass\nInternals: stainless steel\nOrifice: 13.0mm\nKv flow factor: 35 L/min based on water with 1 Bar pressure drop\nSeals: NBR standard, option EPDM, FKM or HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS Code 8481 8059.

298 in stock Model: PU22004

1/4 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm (ATEX option)

1/4 inch Miniature stainless solenoid valve CS Fluid Power ADS8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressure 30 Bar or more)\nVacuum: Torr 10-6 Max\nTemperature: +180°C Max according to seals\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressures over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

239 in stock Model: ADS8000

3/8 Brass Solenoid Valve 0-8.5 Bar 2/2 Normally Closed PU220A-03

3/8 Brass solenoid valve Shako PU220A-03 ®\nFunction: 2/2 way normally closed\nOperation: assisted lift (zero-rated)\nPort: 3/8 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 5 Bar (DC voltage)\nVacuum: 80% vacuum -0.8 Bar Max\nOrifice: 13.0 mm\nKv flow factor: 35 L/min based on water with 1 Bar pressure drop\nSeals: NBR standard, option EPDM, Viton and HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80 °C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS Code 8481 8059.

212 in stock Model: PU22003

3/8 Brass Solenoid Valve 0-12 Bar 2/2 Normally Closed PU220A-03H

3/8 inch Brass solenoid valve Shako PU220A-03H ®\nFunction: 2/2 way normally closed\nOperation: Assisted lift (zero-rated)\nPort: 3/8 BSP, option NPT or Rc thread\nPressure: 0 to 12 Bar.\nOrifice: 13.0mm\nKV flow factor: 35 L/min based on water with 1 Bar pressure drop.\nSeals: Viton standard, option EPDM, NBR or HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 18.5 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nHS Code 8481 8059

212 in stock Model: PU22003H