Search Results

Search results for "-22"

Nass Magnet Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 12v to 380v

Nass Magnet Solenoid Valve Coil System 13/30\nBore: 14.6mm, top plate 10mm\nHeight: 42mm\nWidth: 30mm\nLength: 39mm\nED 100%, Class H, protection according to EN 60529 IP65 with connector.\nConnection: according to: DIN EN 175301803-A\nMaterial: Thermoset resin\nVoltage tolerance: -10% to +10%\nAmbient Temperature: -20°C +50°C\n\nVoltages:\n12vAC 50/60Hz (113-030-0044 or use 12vdc with bridge rectifier connector)\n12vDC 15 Watt 9.7Ω, (113-030-0047, previously 2506442)\n24vAC 19.3VA 6.2 Ω, (113-030-0040, previously 0543 00.1-00/5768, 25002865)\n24vDC 15 Watt 37.8 Ω, (113-030-0028, previously 0543 00.1-00/5753, 2503154).\n48vAC 50/60Hz 19VA 24.3 Ω, (113-030-0052, previously 2507966)\n48vDC 10.9 Watts 20.5 Ω, (113-028-0044)\n64vAC 37.8 Ω\n110vAC 50/60Hz 17.6VA 135 Ω (113-030-0037, Previously 054300.1-00/6869, 2502864)\n110vDC 17 Watts 69 Ω, (113-030-0053, previously 25010353)\n220vDC 18 Watt 338 Ω, (113-030-0051)\n240vAC 50/60Hz, 17.6VA 701 Ω, (113-030-0203)\n380vAC 22VA 2002 Ω, (previously 0543 00.1-00/6755, 25007935)\n\nFits all Shako solenoid 2/2 way 3/8 to 2\" valves: PU220A, PU225A, PU225D, PU225DN, PU225S, PU225H, PU225X, SPU220 and SPU225 series

6281 in stock Model: 22003

1/4 Brass Solenoid Valve 0-8.5Bar 2/2 Normally Closed 2.3mm PU220AR-02

1/4 Brass solenoid valve Shako PU220AR-02 ®\nFunction: 2/2 way normally closed \nOperation: direct acting\nPort: 1/4 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 7 Bar (DC Voltage)\nBody: Brass\nInternals: stainless steel\nSeals: NBR standard, option FKM, EPDM or HNBR\nMedia: air, water, vacuum, light oils and any other gases and fluids under 40CST that are compatible with the materials of construction.\nOrifice: 2.3mm\nKv flow factor: 2.0 L/Min based on water with 1 Bar pressure drop.\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. \nVoltages: 6vDC, 12vDC, 24vDC, 48vDC, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.\nIncludes M4x0.8 mounting holes

1355 in stock Model: PU22002AR

1/8 Brass Solenoid Valve 0-8.5 Bar 2/2 Normally Closed 1.5mm PU220AR-01

1/8 Brass solenoid valve Shako PU220AR-01 ®\nFunction: 2/2 way normally closed \nOperation: direct acting\nPort: 1/8 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 7 Bar (DC Voltage)\nBody: Brass\nInternals: stainless steel\nSeals: NBR standard, option FKM, EPDM or HNBR\nOrifice: 1.5 mm\nKv flow factor: 1.2 L/Min based on water with 1 Bar pressure drop.\nMedia: air, water, vacuum, light oils, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, kerosene, fuel and any other gases and fluids under 40CST that are compatible with the materials of construction.\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. \nVoltages: 6vDC, 12vdc, 24vdc, 48vdc, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.

884 in stock Model: PU22001AR

Solenoid Coil Core 13.2mm, H 38.7mm, W 36mm, L 47.3mm, 31400

Solenoid valve coil 36mm width, model 31400\nInsulation: Class F 155°C or class H 180°C\nConnection: DIN43650A\nBore: 13.2mm\nHeight: 38.7mm\nWidth: 36mm\nLength: 47.3 mm\nPower DC: 22 to 27 Watts according to voltage.\nPower AC: 26VA holding. \nVoltages: 12vDC, 24vDC, 48vDC, 80vDC and 200vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz\nResistance: \n12vDC 5Ω\n24vDC 26.6Ω\n110vAC 97Ω\n220vAC 402Ω

768 in stock Model: 31400

1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320