Search Results

Search results for "PU22003AR"

3/8 Brass Solenoid Valve 0.1-16 Bar 2/2 N/Closed 8mm PU220AR-03

3/8 Brass solenoid valve Shako PU220AR-03 ®\nFunction: 2/2 way normally closed \nOperation: pressure assisted (requires Min 0.1 Bar pressure difference)\nPort: 3/8 BSP thread, option NPT thread\nBody: Brass\nInternals: stainless steel\nPressure: 0.1 to 10 Bar with 15 Watt coil\nPressure: 0.1 to 16 Bar with 18.5 Watt coil\nSealing: NBR standard options EPDM or Viton\nMedia: air, water, light oils and most other non aggressive fluids and gases under 50 CST that are suited to the materials of construction.\nOrifice: 8.0mm\nKv flow factor: 19 L/min based on water with 1 Bar pressure drop.\nMedia temperature: -15°C to +80°C NBR seals, option -10°C to +180°C with Viton seals, -40°C to +150°C HNBR or -5°C to +130°C with EPDM seal material.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 0.1 to 10 Bar AC or 0.1 o 7 Bar DC voltage.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nIncluded 0.5x0.8 mounting holes.

100 in stock Model: PU22003AR

Diaphragm for PU22003AR Shako Solenoid Valve VITON, EPDM or NBR

Viton, EPDM or NBR solenoid diaphragm to fit Shako PU220AR-03 Brass Solenoid Valve, will fit genuine Shako PU22003AR 2/2 way normally closed solenoid valves. \nJust choose which seal material you need. \nSeal diameter 22mm.\n

92 in stock Model: 22003AR-diaphragm

3/8 automatic drain valve for air compressor 0.1-10 Bar with timer 24-240v

3/8 inch Compressor auto drain kit PU22003AR-SVT\nFunction 2/2 way normally closed with cycle timer\nPort: 3/8 BSP thread\nBody: Brass\nInternals: Stainless steel\nOrifice: 8.0mm\nSeal: NBR\nPressure: 0.1 to 10 Bar\nCoil: Nass Magnet 15 Watt Class H DIN43650A IP65 100% duty rated\n \nRepeat cycle solid state timer for solenoid valve SVT22\nMounting: Din43650A square fits directly between solenoid coil and connector\nVoltage: 24 to 240 volt AC or DC, options 12v and other voltages\nIncludes: LED power supply light, LED Power ON light and manual override.\n\nAdjustment: Adjustable ON-time and adjustable OFF-time\nT1 = 0.5 to 10 second ON then 0.5 to 45 minutes OFF\nT2 = 0.5 to 10 second ON then 25 to 150 minutes OFF\nT3 = 20mSec to 300mSec ON then 0.5 to 60 minutes OFF\nT4 = 0.5 to 60 minute ON then 0.5 to 10 seconds OFF\nT5 = 0.3 to 5 minutes ON then 0.5 to 60 minutes OFF\nT6 = 0.5 to 10 minute ON then 0.5 to 60 minutes OFF\nT7 = 0.5 to 10 second ON then 0.5 to 10 second OFF\nT8 = 0 to 20 minute ON then 0 to 20 minutes OFF\nT9 = 0.5 to 45 minute ON then 0.5 to 45 minutes OFF\nT10 = 0.5 to 45 minute ON then 0.5 to 45 minutes OFF\nT12 = 0.5 to 10 second ON then 0.5 to 12 hours OFF\nTDigital = 1 Second to 60 Hours ON then 1 second to 60 Hours OFF (or OFF then ON)\nSVDTDigital = 1 Second to 100 hours ON them 1 Second to 100 Hours OFF (or OFF then ON or Single Shot then OFF)\n\nWhen first powered, the timer will go to the power ON position first and the cycle will repeat.\n\nIdeal automatic compressor drain valve kit. 12vDC available as low voltage digital only.

13 in stock Model: PU22003AR-SVT22