3/4 Nylon solenoid valve 0.3-7 Bar 2/2 Normally Closed c/w Manual Override (ATEX option)
3/4 inch Plastic Water Solenoid Valve GP20\n\nFunction: 2/2 way normally closed with manual override, flow regulator with anti water hammer design \nOperation: pressure assisted (requires minimum 0.3 Bar pressure difference)\nPort 3/4 BSP thread\nPressure: 0.3 to 7 Bar\nBody: reinforced Nylon PA\nInternals: Brass + stainless steel\nSeals: NBR\nTemperature: +5°C to +50°C\nMedia: water and other fluids under 50 CST or gases compatible with materials of construction. \nOrifice: 20mm\nKv flow factor: 113 L/min based on water with 1 Bar pressure difference\nOpening time: 50-250 milliseconds max\nClosing time: 100-500 milliseconds max\nCoil: 4.5 Watt DIN43650B IP65 100% continuously rated\nCoil latching: 1.5 Watts DIN43650B IP65\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nCoil option: 6.8 Watt higher power coil can be used with stronger armature spring for slightly contaminated media. \nVoltages: 12vDC, 24vDC, 48vDC and 12vAC, 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.
10 in stock
Model: GP20