11/2 Nylon solenoid valve 0.3-10 Bar 2/2 Normally Closed (ATEX option)
11/2 inch Plastic Water Solenoid Valve GP40\nFunction: 2/2 way normally closed with manual override, flow regulator with anti water hammer design\nOperation: pressure assisted (requires minimum 0.3 Bar pressure difference)\nPort 11/2 BSP thread, option NPT\nPressure: 0.3 to 10 Bar\nBody: reinforced Nylon\nInternals: stainless steel\nSeals: NBR\nTemperature: +5°C to +50°C\nMedia: water and other fluids under 50 CST or gases compatible with materials of construction.\nOrifice: 55mm\nKv flow factor: 520 L/min based on water with 1 Bar pressure difference\nOpen/close time: 100 milliseconds max\nCoil: 5 Watt DIN43650B IP65 100% continuously rated\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nCoil option: 6.8 Watt higher power coil can be used with stronger armature spring for slightly contaminated media. \nVoltages: 6vdc, 12vDC, 24vDC, 48vDC, 110vDC and 220vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.
1 in stock
Model: GP40