11/4 BSP Motor ball valve WRAS 12-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABV12S
£190.98
£293.81 incl. VATDescription
11/4 BSP motor actuated WRAS stainless steel ball valve ABV12S-E2-MO.
Actuator:
Torque: 16-27NM
Cycle life: 70,000 open/close
Power: 10.3 Watts
Open or close time: 10 seconds
Protection: IP67
Mounting: ISO5211 F03 + F05
Temperature: -15°C to +60°C ambient
Voltages 12vDC-24vDC+24vAC or 110-240vAC with multi voltage technology.
Control option: Failsafe closed, Failsafe Open or Power Open/Power Close.
Includes:
Visual position indication
Manual Override (with Allen key provided)
E2 position feed back switches. (Volt free, no voltage is supplied from the actuator. 36v or 220v, 0.4 Amp Max).
Ball valve:
WRAS approved certificate number 2012107
11/4 BSP thread, option NPT thread
Bore: 32mm
Body: 304 stainless steel
Pressure: 0 to 10 Bar
Temperature rating: 0 to +90°C Max
Seals: PTFE + EPDM WRAS Approved
Media: air, water and other media suitable with stainless steel, EPDM + PTFE.
Options to choose:
a. Failsafe Closed = Power +ve Red; -ve Black valve will open, Power OFF will automatically close with reserve power.
b. Failsafe Open = Power +ve Red and -ve Black valve will close, Power OFF will automatically Open with reserve power.
Failsafe actuators require 30 second power ON to charge reserve power.
Will draw less than 0.5 Watt when powered and not moving.
E2 volt free open + closed position feedback 3 wires (Green + Yellow and common White)
c. Power Open/Power Close = Connect Red +ve and Black -ve, Green is the control wire.
Power to GREEN valve opens, remove power from GREEN valve closes.
E2 volt free open + closed position feedback 4 wires (Blue + Grey and Yellow + White)
Destruction Test.
On the 1st November 2020 at around 5PM we connected an ABV-E2-MO/9AR to a dry 11/2 BSP stainless steel ball valve with 12-24vDC-24vAC failsafe closed actuator. We then connected our SVDT22 (digital cycle timer) set to 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (Except holidays)
In October 2022 the valve finally failed after 977,762 open and close cycles.
Technical Specification
Brand: Connexion
Model: ABV12S-E2-MO
Width: 88.00 mm
Height: 153.00 mm
Depth: 102.00 mm
Weight: 1.40 kg
Valve / Product Type: Ball, Motor Actuated
Body Material: Stainless Steel
Port Size: 11/4 Inch
Function: 2/2 Normally Closed, 2/2 Normally Open, Power Open/Power Close
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM
Approvals: IP67, WRAS
Media: Fluid >50cSt (Non Aggressive), Fluid >50cSt (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Water, Water (RO/Pure/Demin)
Options required: Anti Water Hammer, Bi-Directional Flow, Manual Override, Position Feedback - Closed, Position Feedback - Open + Closed, Position indication - Visual
Orifice: 32mm
Voltage: 12vDC, 12vAC, 24vDC, 24vAC, 110vAC, 230VAC
Reviews
★★★★★5.0 / 5 2 reviews
Geoff G
★★★★★Fantastic purchase. Thanks for the speedy dispatch!
Reviewed on 01/06/2020
Ankush Skidless
★★★★★Great service and support, needed some WRAS actuated ball valves for a water leak detection system. I purchased 20 of the smaller ones a year ago that are still working fine, and these arrived next morning and these completed the new job off perfectly. Will be back for batches as discussed on credit terms. ★(¯`'•.¸(¯`'•.¸☆ Thank-you.•'´¯)¸.•'´¯)★ Thanks Ankush.
Reviewed on 15/05/2023