1/8- 1/2 Brass Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm
£114.36
£141.07 incl. VATDescription
High pressure solenoid valve 1500psi brass CS Fluid Power SAP
Function: 2/2 way Normally Closed
Operation: Pressure assisted (Min 1 Bar pressure differential)
Port: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread
Body: Brass
Internals: stainless steel
Pressure: 1 to 100 Bar
Orifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)
Kv flow factor: 9.1 (5mm orifice) or 16.17 litres (6mm orifice) a minute based on water with a 1 Bar pressure difference.
Sealing: PTFE + NBR, option PTFE with EPDM, FKM, Silicone, VST, Neoprene, ECO, HNBR or Hypalon. Elastomer sealing only 40 Bar Max.
Media: air, water, oil, carbon dioxide and most other non-corrosive gases or fluids under 50CST compatible with materials of construction.
Coil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.
Protection: IP65 LED connector (Included)
Voltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.
Ideally suited for low temperature media down to -60°C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.
All SAP solenoid valves are 100% pressure and leak tested.
Technical Specification
Brand: CS Fluid Power
Model: SAP
Width: 19.00 mm
Height: 88.00 mm
Depth: 41.00 mm
Weight: 0.66 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Seals: ECO, EPDM, HNBR, Hypalon, NBR, Neoprene, Silicone, FKM (Viton)
Media: Air, Fluid >50cSt (Non Aggressive), Gases (Non Aggressive), Oils + Fuels >50cSt Max, Water
Options required: Mounting Holes
Pressure Maximum: 30 Bar, 35 Bar, 40 Bar, 50 Bar, 60 Bar, 64 Bar, 70 Bar, 80 Bar, 90 Bar, 100 Bar
Port Size: 1/8 Inch, 1/4 Inch, 3/8 Inch, 1/2 Inch
Orifice: 5.0mm, 6.0mm
Approvals: ATEX Exm, IP54, IP65, IP67, CSA, UL
Reviews
★★★★★5.0 / 5 1 reviews
Kenan
★★★★★A Great Product, I've used it with CO2 and was extremely successful like you mentioned.
Reviewed on 15/01/2023