1/8 1/4 3/8 Steam Solenoid Valve 0-5 Bar 2/2 Latching 3-4mm
£64.36
£79.37 incl. VATDescription
1/8 1/4 3/8 latching high temperature solenoid valve CS Fluid Power LSA610.
Function: 2/2 way latching bi stable
Operation: direct acting
Port: 1/8, 1/4, 3/8 BSP, option NPT thread.
Body: Brass
Seals: PTFE
Internals: Stainless steel
Shading ring: without
Orifice: 3mm (1/8 + 1/4) or 4mm (3/8 port)
Kv flow factor: 4.43 or 8.29 L/min according to orifice based on water with 1 Bar pressure difference.
Pressure: vacuum to 4.9 Bar
Media: steam, air, water, hot oils and most fluids under 50CST and gases compatible with materials of construction.
Media temperature: +200°C Max
Coil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Coil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.
Protection: IP65 with LED connector (included)
Voltages: 12vDC or 24vDC
LSA6A, LSA8A and LSA10A Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.
Technical Specification
Brand: CS Fluid Power
Model: LSA610
Width: 19.00 mm
Height: 86.00 mm
Depth: 41.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 12vDC, 24vDC
Port Size: 1/4 Inch, 1/8 Inch, 3/8 Inch
Function: 2/2 Latching
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar
Seals: PTFE (Teflon)
Approvals: IP65, IP67, CSA, UL
Media: Air, Fluid >50cSt (Non Aggressive), Gases (Non Aggressive), Oils + Fuels >50cSt Max, Steam, Vacuum (Low), Water
Options required: Manifold, Manual Override, Mounting Holes
Orifice: 3.0mm, 4.0mm