1/8 1/4 3/8 Steam Solenoid Valve 0-10 Bar 2/2 Normally Closed 3-4mm
£49.46
£67.46 incl. VATDescription
1/8 1/4 3/8 Brass steam solenoid valve CS Fluid Power SA6A, SA8A, SA10A
Function: 2/2 way normally closed
Operation: direct acting
Port: 1/8, 1/4 or 3/8 BSP, option NPT thread.
Pressure: 0 to 10 Bar
Media Temperature: +180ºC Max
Seals: PTFE
Orifice: 3.0mm 1/8 and 1/4, 4.0mm 3/8 thread
Kv flow factor: 4.43 or 8.29 L/min according to orifice, based on water with 1 Bar pressure drop.
Media: steam, hot air, hot water and hot oils under 50CST and most other non agressive fluids and gases compatible with materials of construction.
Coil: WPG1 12 Watt H Rated IP67 UL CSA CE approved DIN43650A 100% duty rated.
Coil: WPG2 18 Watt H Rated IP67 UL CSA CE approved DIN43650A 100% duty rated.
Protection: IP65 with LED connector (Included)
Coil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.
Voltages: 12vDC, 24vDC, 48vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC 50/60Hz
A particular favourite for ozone cleaning applications.
Technical Specification
Brand: CS Fluid Power
Model: SA6,SA8,SA10
Width: 19.00 mm
Height: 86.00 mm
Depth: 41.00 mm
Weight: 0.74 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/4 Inch, 1/8 Inch, 3/8 Inch
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: PTFE (Teflon)
Approvals: ATEX Zone II GD, ATEX Exm, IP54, IP65, IP67, CSA, UL
Media: Air, Fluid >50cSt (Non Aggressive), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels >50cSt Max, Steam, Vacuum (Low), Water
Options required: Mounting Holes
Orifice: 3.0mm, 4.0mm