WRAS & WRc approved solenoid valves

Potable water or Drinking WRAS water solenoid valves that connect directly to UK and Euro zone mains water supply require the appropriate water approvals. The UK accepted approvals are WRAS (Water Regulations Advisory Scheme) and WRc (Water Research Centre) and within the rest of the Euro zone require DVGW and KTW approvals which may include the homogenisation's of UNI EN 681-1/2003 WB e WA, DVGW W270, DVGW W534, CLP, ACS, KIWA, TGM-LMG 75.

WRAS approved solenoid valves for mains water applications are available in most sizes from ¼” through to 2" thread for both 2/2 way normally closed and normally open that fully conform to the water regulations with elastomer seals conforming to BS6920 (Test for water quality) and have passed the vigorous testing of 200,000 open / closed cycles at maximum pressure and temperature and a final 150% over pressure leak and temperature test. See below valves with WRAS approval:

Useful links: https://www.wras.co.uk

http://www.wrcapproved.com


WRc approval.

WRc Approval ® "fit for purpose" certification is a voluntary scheme conducted by the Water Research centre to help solenoid valve and other water equipment suppliers and manufacturers demonstrate quality of manufacturing and performance. More importantly products used on water applications that conform to WRc quality, installation and performance will protect our delicate drinking water system from dangerous and harmful debris, chemicals and solvents which could leach dangerously back into the water system and be consumed.

WRc ™ approval and certification offers value to International, Euro Zone and UK companies with existing approvals from USA, Holland, Japan, France, Austria, New Zealand, Australia and Germany.

WRAS approved solenoid actuated valves either brass, stainless steel or plastic for use with UK, England, Ireland, Scotland and Wales mains water, potable water and potable drinking water systems. Zero Rated - valve operates from vacuum to maximum working pressure, Pressure assisted - valve requires minimum pressure difference between inlet and outlet port. Sizes 1/4-2" thread & speed fit 6,8,10 and 15mm or 1/4, 3/8 &1/2".


View all WRAS solenoid valves here.


Normally Closed - (Failsafe Closed power to Open)



RPE 1136 6mm WRAS Approved solenoid valve.
Port: 6mm Push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE 1145BC 8mm WRAS Approved solenoid valve.
Port: 8mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE 1156BC 10mm WRAS Approved solenoid valve.
Port: 10mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 3105BC 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 3115BC 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1186BC 1/4 WRAS Approved solenoid valve.
Port: 1/4 Push Fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1196BC 3/8 WRAS Approved solenoid valve.
Port: 3/8 Push Fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 4105BC 3/8 WRAS Approved solenoid valve.
Port: 3/8" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 4115BC 3/8 WRAS Approved solenoid valve.
Port: 3/8" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 5105BC 1/2 WRAS Approved solenoid valve.
Port: 1/2" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 5115BC 1/2 WRAS Approved solenoid valve.
Port: 1/2" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 1175BC 15mm WRAS Approved solenoid valve.
Port: 15 mm push fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE 6115BC 3/4 WRAS Approved solenoid valve.
Port: 3/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE S180 3/4 single WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE D180 3/4 double WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



RPE S90 3/4 single WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed


RPE D90 3/4 double WRAS Approved solenoid valve.
Port: 3/4" BSP male to 10mm or 12mm hose barb
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally closed



Brass WRAS certified solenoid valves


Shako PU220D-03 3/8 BSP WRAS Approved solenoid valve.
Port: 3/8 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-04 1/2 BSP BSP WRAS Approved solenoid valve.
Port: 1/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-06 3/4" BSP BSP WRAS Approved solenoid valve.
Port: 3/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Shako PU220D-08 1" BSP WRAS Approved solenoid valve.
Port: 1 BSP
Body: Brass
Seals: EPDM
Pressure: 0 - 10 Bar
Function: 2/2 way normally closed


Sirai L182D48-114 11/4" BSP WRAS Approved Solenoid Valve
Port: 11/4 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Sirai L182D48-112 11/2" BSP WRAS Approved Solenoid Valve
Port: 11/2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed


Sirai L182D48-2 2" BSP WRAS Approved Solenoid Valve
Port: 2 BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally closed



Normally /Open - (Failsafe Open power to Close).

RPE 3115BA 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP male
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 3105BA 1/4" BSP WRAS Approved solenoid valve.
Port: 1/4" BSP female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 4115BA + 4105BA 3/8" BSP and 5115BA + 5105BA 1/2", 6115BA 3/4" WRAS Approved solenoid valve.
Port: 3/8, 1/2 & 3/4" BSP male and 3/8, 1/2" female
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


RPE 1136BA 6mm, 1145BA 8mm, 1156BA 10mm, 1175BA 15mm, 1186BA 1/4" and 1196BA 3/8" push fit WRAS Approved solenoid valve.
Port: 6mm, 8mm, 10mm, 15mm, 1/4" and 3/8" speed fit
Body: Nylon
Seals: NBR
Pressure: 0.2 - 10 Bar
Function: 2/2 way normally open


Sirai L282D 1/2 to 2" BSP WRAS Approved Solenoid Valve
Port: 1/2, 3/4, 1, 11/4, 11/2 and 2" BSP
Body: Brass
Seals: EPDM
Pressure: 0.5 - 10 Bar
Function: 2/2 way normally open


Latching (bi-stable) WRAS Solenoid Valves


Latching solenoid valves require only a short electrical pulse to stay open and then a reversed polarity power pulse to stay closed. 


RPE 1136BB 6mm WRAS Approved solenoid valve

Port: 6mm Push fit

Body: nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 1145BB 8mm WRAS Approved solenoid valve

Port: 8mm Push fit

Body: Nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 1156 BB 10mm WRAS Approved solenoid valve

Port: 10mm Push fit

Body: Nylon, Seal: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 1175BB 15mm WRAS Approved solenoid valve

Port: 15mm Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 1186BB 1/4 inch WRAS Approved solenoid valve

Port: 1/4 inch Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 1196BB 3/8 inch WRAS Approved solenoid valve

Port: 3/8 inch Push Fit

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 3115BB 1/4 BSP WRAS Approved solenoid valve

Port: 1/4 BSP Male thread

Body: Nlyon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 3105BB 1/4 BSP WRAS Approved solenoid valve

Port: 1/4 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 4115BB 3/8 BSP WRAS Approved solenoid valve

Port: 3/8 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 4105BB 3/8 BSP WRAS Approved solenoid valve

Port: 3/8 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 5115BB 1/2 BSP WRAS Approved solenoid valve

Port: 1/2 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar



RPE 5105BB 1/2 BSP WRAS Approved solenoid valve

Port: 1/2 BSP female thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar


RPE 6115BB 3/4 BSP WRAS Approved solenoid valve

Port: 3/4 BSP male thread

Body: Nylon, Seals: NBR

Voltage: 6 volt DC, Pressure 0.2 - 10 Bar





WRAS Approved Motor actuated ball valves


ABVM04S 

1/2 BSP mini ABVM04 electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open or Power Open/Power Close.

The Low power 5 watt 5 second IP67 mini actuators voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals PTFE.
Options to choose.
Failsafe Closed - Power ON will OPEN - Power OFF will automatically CLOSE with reserve power.
Failsafe Open - Power ON will CLOSE - Power OFF will automatically OPEN with reserve power.
Failsafe: Requires 15 second power ON when out of the box to charge, thereafter min 10 second power ON when energised for recharging. Will draw less than 1 Watt when powered and not moving.
Power Open/Close - connect RED +ve and BLACK -ve wires, GREEN wire is control wire to power open or power off close.
Manual Over Ride = Button Lift + Twist will open/close valve and disengage motor, push back down to reengage motor. Available 9-24 volt only
Position Switches = volt free position CLOSED and OPEN feed back.


ABVM06S 

3/4 BSP mini ABVM06S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open or Power Open/Power Close.

The Low power 5 watt 5 second IP67 mini actuators voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals PTFE.
Options to choose.
Failsafe Closed - Power ON will OPEN - Power OFF will automatically CLOSE with reserve power.
Failsafe Open - Power ON will CLOSE - Power OFF will automatically OPEN with reserve power.
Failsafe: Requires 15 second power ON when out of the box to charge, thereafter min 10 second power ON when energised for recharging. Will draw less than 1 Watt when powered and not moving.
Power Open/Close - connect RED +ve and BLACK -ve wires, GREEN wire is control wire to power open or power off close.
Manual Over Ride = Button Lift + Twist will open/close valve and disengage motor, push back down to reengage motor. Available 9-24 volt only
Position Switches = volt free position CLOSED and OPEN feed back.


ABVM08S 

1 BSP mini ABVM08S electric actuated WRAS approved ball valve with visual position indicator with control options Failsafe Closed, Failsafe Open or Power Open/Power Close.

The Low power 5 watt 5 second IP67 mini actuators voltage options 9 to 24 volt AC or DC and 110 to 240vAC. Full flow 304 stainless steel ball valve, Pressure 0 to 10 Bar, Temperature -15C to +100C, Seals PTFE.
Options to choose.
Failsafe Closed - Power ON will OPEN - Power OFF will automatically CLOSE with reserve power.
Failsafe Open - Power ON will CLOSE - Power OFF will automatically OPEN with reserve power.
Failsafe: Requires 15 second power ON when out of the box to charge, thereafter min 10 second power ON when energised for recharging. Will draw less than 1 Watt when powered and not moving.
Power Open/Close - connect RED +ve and BLACK -ve wires, GREEN wire is control wire to power open or power off close.
Manual Over Ride = Button Lift + Twist will open/close valve and disengage motor, push back down to reengage motor. Available 9-24 volt only
Position Switches = volt free position CLOSED and OPEN feed back.


You can view all of the motor actuated ball valves here, including WRAS approved valves, 3 piece stainless steel ball valves and modulating control electrically actuated ball valves.