Electrical Connector 2P+E Form A with Bridge Rectifier PG9 IP65 230v

Description

EN 175301-803 (DIN43650A) square electrical connector 2pin + earth with full bridge rectifier for solenoid valves, pins 18mm
Connection: DIN ISO4400 Form A DIN 43650A 28mm square
Voltage: 230 volt
Current: 1 Amp maximum
Design: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover
Circuit: Full bridge rectifier (Converts AC 50/60Hz to DC) and VDR varistor with bipolar circuit protection. Drop off delay: 3mSec Max
Power consumption: 5mAmp Maximum
Resistance: 4 mOhm maximum.
Conduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed
Seals: NBR LABS-free 6 Grommet, gasket and cover gasket)
Max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate.
Resistance 4 mOhm Max.
Position: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),
Central fixing screw: steel 4.8 zinc plated
Contacts: CuZn, Sn/Cu plated
Temperature: -25°C to +125°C
Circuit 08

Technical Specification