Search Results

Search results for "-27025"

Coaxial 2/2 solenoid valve 0-40 Bar Brass Stainless 3/4 1 11/4 11/2 DN25

Coax solenoid valve 2 way 0-40 Bar DN25 RSG 27025\nFunction: 2/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 40 Bar (0 to 16 Bar reverse flow)\nOrifice: 25mm\nKv flow factor: 205 L/Min\nPort sizes: 3/4, 1, 11/4 or 11/2 BSP thread, option NPT or flange\nBody: Brass, option brass nickel plated body, 304 or 316L stainless steel\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nOxygen Seals: BAM approved FKM + PTFE seals, oil/grease free cleaning of all the valve parts, special grease for 20 or 40 Bar oxygen +60°C Maximum and correct packing and marking for oxygen application. Finally, the valve will be checked for tightness with nitrogen and packed for oxygen service.\n\nVacuum Seals: PTFE with leakage <10¯⁶ mbar L/S.\n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other custom voltages available upon request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\nApprovals: TÜV, DGVM\n\nOptions: 270A25 normally closed, 270B25 normally open, without oil or grease, manual over ride, inductive open and/or closed position switches with LED + 2mtr cable, various DIN connectors or aluminium terminal box, mounting brackets and modular sub base mounted systems. \n\nThe 24vDC valve can be fitted with DIN43650A PWM connector (Pulse Width Modulating) a power reduction technology that reduces the holding power by up to 80% for a Greener environmentally friendly low power; low heat emission and improved thermal stability. \nOther PWM voltages available upon request.\n\nHS Code: 84818079

0 in stock Model: 27025