Search Results

Search results for "7120"

3/4 Brass Solenoid Valve 0.5-10 Bar 2/2 Normally Closed PU225A-06

3/4 BSP Brass solenoid valve 2/2 way normally closed, Shako PU22506, Pressure 0.5 to 10 Bar, Orifice 25.0mm, Seals NBR; Options EPDM, FKM or HNBR, Coil 15 Watt Nass Magnet Class H DIN43650A CE IP65 100% duty rated option ATEX EExmIIT4 coil for hazardous area zone 21 + 22. Voltages 12vdc, 24vdc, 48vdc, 110vdc, 220vdc or 12vac, 24vac, 48vac, 110vac, 220vac, 230vac, 240vac or 380vac 50/60hz.

253 in stock Model: PU22506

3/4 WRAS Solenoid Valve 0-7 Bar 2/2 N/Closed Brass PU220D-06

3/4 BSP WRAS approved Brass solenoid valve 2/2 way normally closed with anti water hammer design, Pressure 15 watt coil: 0 to 7 Bar (AC voltage) or 0 to 5 Bar (DC Voltage), Pressure 18.5 watt coil: 0 to 10 Bar, Coils are Nass Magnet Class H IP65 CE DIN43650A 100% duty rated and supplied with IP65 electrical connector as standard. Voltages 12vdc, 24vdc, 48vdc, 110vdc, 220vdc or 12vac, 24vac, 48vac, 110vac, 220vac, 230vac, 240vac or 380vac 50/60hz. This Shako PU220D-06 Brass Assisted Lift or Zero Rated solenoid valve has a 20mm orifice giving a Kv flow factor of 125L/Min based on water with a 1 bar pressure difference, i.e. inlet pressure is 1 bar higher than outlet pressure, more flow can be achieved with higher pressure difference. WRAS Certificate Number 1704353, tested and approved until April 2022. Test procedure 200,000 open and close cycles at 7 Bar +90ºC hot and 25ºC cold water, then a final 10.5 Bar pressure leak and function test.

191 in stock Model: PU220D-06

3/4 180 degree single Solenoid Valve 0.2-10 Bar N/Closed S180

Cold Water inlet Solenoid Valve for washing machine, dishwasher or any water appliance with inlet 3/4BSP male to single outlet at 180º straight with 10mm or 12mm hose barb. This solenoid Valve has WRC approval is 2/2 way Normally Closed with Nylon body, 0.2 to 10 Bar rated with faston electrical tags all voltages from 12 volt to 240 volt AC or DC. Series S180 3/4 to 10/12mm WRC Approved 2/2 N/Closed Nylon 0.2 - 10 Bar pressure assisted RPE Water Solenoid Valve. The RPE plastic solenoid valve S180 series single 180º inlet to outlet Ideal for most domestic and commercial water appliances such as washing machines, dishwashers, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP female thread with a 104F 10.5mm or 120F 12.5mm hose tail to fit into most water appliance rubber hoses of similar size.

81 in stock Model: S180

3/4 WRAS solenoid valve 0.3-10Bar N/Closed Sirai L182D01-34

WRAS approved solenoid valve 3/4 BSP 2/2 Normally Closed Brass 0.3 - 12 Bar Potable Water with a max working pressure of 20 bar. Sirai L182 3/4" BSP WRAS (WRc) approved 2/2 way Normally Closed Brass Solenoid Valve is fitted with Wrc WRAS approved EPDM seals as standard. You can use any of the WRAS (WRc) approved solenoid valves for Potable (drinking) water and mains water use. There is a full range of WRAS approved Sirai L182 water solenoid valves from sizes 1/2 through to 1" BSP available in most voltages in stock ready for next day delivery as standard.

34 in stock Model: L182D01-34

DN150 6" EN161 Gas Approved Motor Actuated Valve 0-500mBar VMH95

DN150 6" VMH95 Flanged PN16 Gas safety shut off valve, Certified EN161 Class A group 2 back pressure sealing compliant for natural gas; Function: Normally Closed; Pressure 0 to 500 milliBar. The VMH7 is a motorised Gas safety shut off valve with PCS CPI closed position indication feed back switch. The VMH series gas valve is a safety shut off valve for gas with hydraulic actuator and are suitable for air or gas blocking and releasing controls, required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns and others gas consuming equipment. Suitable for use with air and non-aggressive gases included in the 1, 2 and 3 families (EN 437), special versions for aggressive gases. The valve is open only when energized: if, for any reason, power supply goes down, the valve closes immediately (intrinsic safe), Qualified for continuous service (100% ED). Size DN65-80 is equipped with flow rate adjustment. An incorporated fine mesh filter protects the valve seat and disc as well as downstream components and prevents dirty contamination. Provided with G1/4 pressure gauge on two sides in both inlet and outlet chamber to connect manometers, pressure switches, leakage tester or other gas equipments. The actuator is provided with ISO 4400 plug for easy cabling. The protection class is IP65 (EN 60529). If compressed air is available, the hydraulic actuator can be replaced with a pneumatic one (VMP series). All components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical sturdiness, sealing and resistance to corrosion of the components. Valves are 100% tested and fully warranted.

4 in stock Model: VMH95

3/4 WRAS solenoid valve 0.3-16Bar 2/2 N/Closed Danfoss 032U7120

Danfoss 032U7120 3/4" BSP 2/2 normally closed WRAS certified and approved anti water hammer water solenoid valve with controlled opening speed 0.04 seconds and controlled closing speed 1 second to prevent water hammer. Supplied with Danfoss solenoid coil and DIN43650A electrical connector. Working pressure range: 0.3 to 16 Bar, Body: Brass, Seals: EPDM, Orifice: 20mm Kv flow factor 8 m3/Hour, Voltages: 24vDC, 24vAC or 230vAC other voltages available upon request. Voltage tolerance +/-10%. Coil: Class H DIN43650A Protection: IP65, Power: DC 18 watts / AC 10 Watts.

1 in stock Model: 032U7120

Elektrogas Manual Reset Gas Solenoid Valve – EVRM-NC-5

5" DN125 PN16 Flange EVRM-NC-5 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

1 in stock Model: EVRM-NC-5

Flanged angle seat piston valve Stainless DN10-80 16 Bar

Pneumatic Angle Seat Piston Valve 2/2 Way Normally Closed Pressure 0 to 16 Bar Temperature +200ºC Max Flange Port size DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65 and DN80 PN16 or ANSI150Lb. Body is 316 Stainless Steel Internals are also 316 stainless steel with virgin PTFE sealing as standard. The ASPVSSF series Pneumatic (air operated) Angle Seat Piston Globe Valve and all stainless steel construction with 304 stainless steel compact pneumatic actuator offers strong chemical and corrosion resistance with almost full flow design offering a high Kv flow factors. Suitable for air, water, steam, vacuum, light oil, heavy oil, aggressive and corrosive acid and alkali media and thick glutinous fluids up to 600 centistokes. Anti water hammer as standard with flow direction under seat. Making the ASPVSS-F series a firm favorite with most chemical, food and water processing engineers.

0 in stock Model: ASPVF

Coaxial solenoid valve 0-64 Bar Brass Stainless 1/2 3/4 1 27120

Brass, 303 and 316L stainless steel coaxial solenoid valve. Function 2/2 way; Pressure 0 to 40 Bar (0-16 Bar reverse flow); Orifice 20mm; Kv 145 L/Min; Port sizes 1/2, 3/4 or 1 BSP; NPT thread or flange, Sealing FKM optional NBR, EPDM or PTFE. Options include 271A20 normally closed, 271B20 normally open, degreased for oxygen use, brass nickel plated, manual over ride, open and/or closed volt free position feed back switches, metal terminal box, mounting brackets and modular sub base mounted systems. Voltages 12vDC, 24vDC, 24vAC, 110vAC, 110vDC, 230vDC and 230vAC. The 24 volt and 230 volt valves are fitted with PWM (Pulse Width Modulating) power reduction technology that reduce the holding power by up to 80% for a more Green environmental friendly low power; low heat emission and improved thermal stability.

0 in stock Model: 27120

Coaxial Solenoid valve 0-64 Bar Brass Stainless 3/2 1/2 3/4 1 37120

Brass coaxial solenoid valve Function 3/2 way; Pressure 0 to 64 Bar (0-16 Bar reverse flow); Orifice 20mm; Kv 145 L/Min; Port sizes 1/2, 3/4 or 1 BSP; NPT thread or flange, Seals FKM option NBR, EPDM or PTFE. Other options include 371A20 normally closed; 371B20 normally open, degreased for oxygen use, brass nickel plated, manual over ride, open and/or closed volt free position feed back switches, metal terminal box and mounting brackets. Voltages 12vDC, 24vDC, 24vAC, 110vAC, 110vDC, 230vDC and 230vAC. The 24 volt and 230 volt valves are fitted with PWM (Pulse Width Modulating) power reduction technology that reduce the holding power by up to 80% for a more Green environmental friendly low power; low heat emission and improved thermal stability.

0 in stock Model: 37120