Search Results

Search results for "M16"

3/4 180 degree single Solenoid Valve 0.2-10 Bar N/Closed S180

Cold Water inlet Solenoid Valve for washing machine, dishwasher or any water appliance with inlet 3/4BSP male to single outlet at 180º straight with 10mm or 12mm hose barb. This solenoid Valve has WRC approval is 2/2 way Normally Closed with Nylon body, 0.2 to 10 Bar rated with faston electrical tags all voltages from 12 volt to 240 volt AC or DC. Series S180 3/4 to 10/12mm WRC Approved 2/2 N/Closed Nylon 0.2 - 10 Bar pressure assisted RPE Water Solenoid Valve. The RPE plastic solenoid valve S180 series single 180º inlet to outlet Ideal for most domestic and commercial water appliances such as washing machines, dishwashers, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP female thread with a 104F 10.5mm or 120F 12.5mm hose tail to fit into most water appliance rubber hoses of similar size.

85 in stock Model: S180

3/4 90 degree single Solenoid Valve 0.2-10 Bar N/Closed S90

S90 Water inlet Solenoid Valve for washing machine or dishwasher appliance inlet 3/4BSP male to a single outlet at 90 degree angle with single 10mm or 12mm hose barb. This right angle nylon solenoid Valve has WRC approval is Normally Closed 0.2 to 10 Bar rated with faston electrical tags all voltages from 12 volt to 240 volt AC or DC. Series S90 3/4 to 10/12mm WRC Approved 2/2 N/Closed Nylon 0.2 - 10 Bar pressure assisted RPE Water Solenoid Valve. The RPE plastic solenoid valve S90 series single 90º inlet to outlet Ideal for most domestic and commercial water appliances such as washing machines, dishwashers, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP female thread with a 10.5mm of 12.5mm hose tail to fit into most water appliance rubber hoses of similar size.

82 in stock Model: S90

1/2 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD15

1/2 inch 316 Stainless steel solenoid valve MD15CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 16mm Kv 61.7 Litres a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Coil: M16 IP65 Class F CE 26 Watts DIN43650A, 100% duty rated. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

55 in stock Model: MD15SCS14M16

3/4 180 degree double Solenoid Valve 0.2-10 Bar N/Closed D180

Cold Water Solenoid Valve for washing machine, dishwasher or water appliance inlet 3/4BSP male to double outlet at 180º straight with 10mm 208F or 12mm 225F hose barbs. This solenoid Valve has WRC approval is Normally Closed with Nylon body, 0.2 to 10 Bar rated with faston electrical tags all voltages from 12 volt to 240 volt AC or DC. The RPE plastic solenoid valve D180 series double 180º inlet to outlet Ideal for most domestic and commercial water appliances such as washing machines, dishwashers, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP female thread with twin 10.5mm of 12.5mm hose tail to fit into most water appliance rubber hoses of similar size.

50 in stock Model: D180

1 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD25

1 inch 316 Stainless steel solenoid valve MD25CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 28mm Kv 133 Liters a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

44 in stock Model: MD25SCS14M16

3/4 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD20

3/4 inch 316 Stainless steel solenoid valve MD20CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 23mm Kv 105 Liters a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

40 in stock Model: MD20SCS14M16

Solenoid Coil Core 16.1mm, H 50mm, W 37.5mm, L 37.5mm M16

M16 Solenoid coil ISO 43650A with Class F windings (155C), IP65 protection (with connector) dimensions: Core/ID 16.1mm, Height 50mm, Width/diameter 37.5mm. This M16 solenoid coil is available from stock in the following voltages, 12vDC, 24vDC, 48vDC, 125vDC or 24vAC, 110vAC or 230volt AC 50/60Hz. This higher power solenoid coil can be found on many hydraulic valve systems and solenoid valves. Power consumption DC 26 Watts, AC 50/60 Hz = Inrush 70VA Holding 35VA, resistance 12vdc 5.6 Ohms 2.14 Amps, 24vdc 22 Ohms 1.1 Amps, 110vAC 420 Ohms 0.27 Amps and 220vAC 1600 Ohms 0.12 Amps.

38 in stock Model: M16

11/2 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD40

11/2 inch 316 Stainless steel solenoid valve MD40CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 40mm Kv 338 Liters a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

33 in stock Model: MD40SCS14M16

11/4 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD32

11/4 inch 316 Stainless steel solenoid valve MD32CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 32mm Kv 217 Liters a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

23 in stock Model: MD32SCS14M16

2 Stainless Solenoid Valve 0-10 Bar 2/2 N/Closed MD50

2 inch 316 Stainless steel solenoid valve MD50CSC14 Function: 2/2 way Normally Closed, Pressure: 0 to 10 Bar, Orifice: 50mm Kv 533 Liters a minute based on water with 1 bar pressure difference. Sealing: EPDM, NBR or FKM. Suitable media: vacuum (10 Torr) with NBR sealing, compressed air, water, light oil, RO or pure water, diesel fuels and most other compatible liquid and gas media from vacuum to 10 Bar. Voltages 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC, 220vAC, 230vAC or 240vAC.

16 in stock Model: MD50SCS14M16

Manual Reset Elektrogas Gas Solenoid Valve – EVRM-NC-1

1" BSP EVRM-NC-1 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

8 in stock Model: EVRM-NC-1

Elektrogas Manual Reset Solenoid Valve for Gas – EVRM-NC-3/4

3/4" BSP EVRM-NC-3/4 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases family 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

7 in stock Model: EVRM-NC-3/4

Elektrogas Manual Reset Solenoid Valve for Gas – EVRM-NC-11/2

11/2" BSP EVRM-NC-1.1/2 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

7 in stock Model: EVRM-NC-11/2

Manual Reset Elektrogas Gas Solenoid Valve – EVRM-NC-2

2" BSP EVRM-NC-2 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

6 in stock Model: EVRM-NC-2

Elektrogas Manual Reset Gas Solenoid Valve – EVRM-NC-2.1/2

21/2" DN65 PN16 Flange EVRM-NC-2.1/2 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

5 in stock Model: EVRM-NC-21/2

Elektrogas Manual Reset Solenoid Valve for Gas – EVRM-NC-6

6" DN150 PN16 Flange EVRM-NC-6 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

4 in stock Model: EVRM-NC-6

Elektrogas Manual Reset Gas Solenoid Valve – EVRM-NC-1/2

1/2" BSP EVRM-NC-1/2 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases family 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options.

3 in stock Model: EVRM-NC-1/2

Elektrogas Manual Reset Solenoid Valve for Gas – EVRM-NC-3

3" DN80 PN16 Flange EVRM-NC-3 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

3 in stock Model: EVRM-NC-3

Manual Reset Elektrogas Gas Solenoid Valve – EVRM-NC-4

4" DN100 PN16 Flange EVRM-NC-4 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

3 in stock Model: EVRM-NC-4

Manual Reset Elektrogas Gas Solenoid Valve – EVRM-NC-8

8" DN200 PN16 Flange EVRM-NC-8 Gas Solenoid Valve, Function Manual Reset Normally Closed, Certified EN161 Class A Group 2, Pressure 0 to 0.6 Bar 600mBar, Media Mains Natural Gas and non corrosive gases families 1, 2 and 3. The manual reset safety system is designed to prevent the valve from automatically reopening after power failure. When power is reapplied the valve will stay closed until manually reset (pulled) back into the open position - power will then keep the valve in the open position after being reset. Upon power failure the gas valve will quickly close preventing gas flow. The design of the system is to prevent mains gas flow until the ignition pilot light has been re-established and checked by an on site engineer / maintenance technician who can then lift the manual reset gas valve back into the fully open position allowing full mains gas flow. Standard stock voltage 230vAC and pressure 0-600mBar, other voltages 12v, 24volt or 110vAC and 6 Bar pressure options available as special order.

1 in stock Model: EVRM-NC-8