3/8 WRAS Water solenoid valve 0-10 Bar 2/2 normally closed Brass PU220D-03
£70.19
£107.98 incl. VATDescription
3/8 inch WRAS approved Brass water solenoid valve PU220D-03
Function: 2/2 way normally closed with anti water hammer design (slowed close)
Port: 3/8 BSPP thread, option NPT or Rc Thread
Pressure: 0 to 7 Bar (AC) or 0 to 6 Bar (DC Voltage) with 15 Watt Coil.
Pressure: 0 to 10 Bar with 18.5 Watt Coil.
Operation: Assisted Lift (Zero Rated)
Temperature: -5°C to +90°C Max
Body: Brass
Internals: stainless steel
Seals: EPDM WRAS approved for water.
WRAS Certificate Number 2306329.
Media: Water
Orifice: 13mm
Kv flow factor: 59L/Min based on water with a 1 bar pressure difference.
Coil: 15 Watt system 13/30 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.
Coil: 18.5 Watt system 13/36 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.
Protection: IP65 with electrical connector (Included).
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.
Voltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.
WRAS Certificate Number 2306329.
Tested and approved 200,000 open and close cycles at 7 Bar with 25°C cold water, then a final 10.5 Bar pressure leak and function test.
Technical Specification
Brand: Shako Co Ltd
Model: PU220D-03
Width: 48.00 mm
Height: 101.00 mm
Depth: 66.50 mm
Weight: 0.74 kg
Valve / Product Type: Solenoid
Body Material: Brass
Voltage: 110vAC, 110vDC, 12vDC, 200vDC, 230VAC, 24vAC, 24vDC, 380vAC, 48vAC, 48vDC
Port Size: 3/8 Inch
Function: 2/2 Normally Closed
Operation: Assisted Lift
Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM
Approvals: ATEX Zone II GD, ATEX Exm, IP65, WRAS
Media: Water
Options required: Anti Water Hammer
Orifice: 13mm