0
£0.00
General Valves
WRAS
Natural Gas
Wizard
Ball Valves
Pneumatics
Contact Us
Home
More 1/8 high pressure solenoid valves 40+ bar
More valves 40 bar or more
Solenoid valves according to pressure
Solenoid valve - search wizard
1/8 3/2 way 40+ bar
1/8 3/2 way 40+ Bar
1/8 inch high pressure 3/2 way solenoid valves 40+ Bar.
Filter Products
Price
Show filters
0
Port Size
1/8 Inch
0
1/4 Inch
0
3/8 Inch
0
1/2 Inch
0
Media
Air
0
Fluid >50cSt (Non Aggressive)
0
Fluid >50cSt (Slight Acid/Alkali)
0
Gases (Non Aggressive)
0
Gases (Slight Acid/Alakli)
0
Oils + Fuels >50cSt Max
0
Vacuum (Low)
0
Vacuum (Medium)
0
Water
0
Water (RO/Pure/Demin)
0
Function
3/2 Normally Closed
0
3 ports with 2 positions. Power off inlet closed, outlet open to exhaust - power on inlet open to outlet with exhaust closed.
3/2 Normally Open
0
3 ports 2 positions. Inlet open to outlet with exhaust closed - power on inlet closed with outlet open to exhaust.
3/2 Universal
0
3 ports, 2 positions flow can be in any direction. Can be piped as 3/2 normally closed flow into inlet, 3/2 normally open flow into exhaust, 3/2 diverting flow into outlet.
Pressure Maximum
6 Bar
0
6 Bar = 6000 millibars = 88.26 psi = 6000 kPa = 0.6 MPa
8 Bar
0
8 Bar = 8000 millibars = 117.68 psi = 8000 kPa = 0.8 MPa
12 Bar
0
12 Bar = 176.52 psi = 1.2 MPa
16 Bar
0
16 Bar = 235.36 psi = 1.6 MPa
25 Bar
0
25 Bar = 367.8 psi = 2.5 MPa
30 Bar
0
30 Bar = 441.3 psi = 3 MPa
60 Bar
0
60 Bar = 882.6 psi = 6 MPa
Seals
EPDM
0
EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels
FKM (Viton)
0
FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.
NBR
0
NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.
PTFE (Teflon)
0
PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C
Approvals
ATEX Zone II GD
0
hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.
ATEX Exd
0
ATEX Protection by enclosure, EEx d IIC T flameproof solenoid coil
IP65
0
Dust tight and protected against water jets
IP67
0
Dust protected and protected against immersion in water
IP68
0
Dust protected and protected against the effects of continuous immersion in water.
CUTR
0
CUTR approval stands for "Center for Urban Transportation Research" approval, indicating compliance with transportation standards and regulations for projects or products.
GOST
0
GOST approval is a certification indicating compliance with Russian safety standards for products, essential for entering the Russian market.
Inmetro
0
INMETRO approval certifies products for compliance with Brazilian safety standards, ensuring quality, safety, and reliability for consumers in Brazil.
SIL3
0
SIL3 (Safety Integrity Level 3) approval certifies a system's capability to meet stringent safety standards, ensuring reliability and minimal risk in high-risk environments.
Orifice
1.2mm
0
Valve orifice or sealing face with diameter 1.2mm
1.8mm
0
Valve orifice or sealing face with diameter 1.8mm
2.2mm
0
Valve orifice or sealing face with diameter 2.2mm
2.5mm
0
Valve orifice or sealing face with diameter 2.5mm
3.0mm
0
Valve orifice or sealing face with diameter 3mm
3.5mm
0
Valve orifice or sealing face with diameter 3.5mm
4.0mm
0
Valve orifice or sealing face with diameter 4mm
Voltage
12vDC
0
12 volts Direct Current
12vAC
0
12 volts 50/60Hz Alternating Current
24vDC
0
24 volts Direct Current
24vAC
0
24 volts 50/60Hz Alternating Current
48vAC
0
48 volts 50/60Hz alternating current
48vDC
0
48 volts Direct Current
110vAC
0
110 volts 50/60Hz Alternating Current
110vDC
0
110 volts Direct Current
230VAC
0
230 volts 50/60Hz Alternating Current
200vDC
0
200 volts Direct Current
Options required
Degreased
0
Oil and grease removed typically for oxygen or paint spray use.
Manual Override
0
A facility to manually move the valve into the fully actuated position via a button, lever or key.
Mounting Holes
0
Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.
Shading Ring - Silver
0
The copper shading ring in the solenoid tube has been replaced with silver. Typically used for RO water and aggressive media applications.
Shading Ring - without
0
The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.
Only Show Items In Stock
Hide spare parts
Hide filters
0
Showing 1 - 1 of
1 total products
Sort By Name: A-Z
Sort By Name: Z-A
Sort By Price: Low to high
Sort By Price: High to low
Sort By Part Number: A-Z
Sort By Part Number: Z-A
Sort By Stock
ATEX Exd solenoid valve 3/2 Way 0-63 Bar 1/8-1/2 30126 1.2-4mm
£362.21
£207.49
inc VAT
View options
1 IN STOCK
Show 10
Show 20
Show 50
Show 100
1