Solenoid valve world - More 2 plastic water valves

Valve / Product Type

Flow rate control

Flow regulating valves with manual or electric modulating 4-20mA control.

Motor Actuated

Solenoid

Valves controlled by electrical signal via a solenoid or electro magnet.

Media

Air

Fluid >50cSt (Slight Acid/Alkali)

Fluid >50cSt (Stong Acid/Alkali)

Fluid Thick 51>500cSt

Gases (Slight Acid/Alakli)

Gases (Strong Acid/Alkali)

Water

Water (RO/Pure/Demin)

Body Material

Nylon

UPVC

Function

2/2 Normally Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

Power Open/Power Close

Valve requires power to open and power to close, no power valves stays in position.

Pressure Maximum

Seals

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Approvals

ATEX Zone II GD

hazardous area classification indicating a potentially explosive atmosphere with gases and dust present, requiring specific equipment for safe operation.

ATEX Exm

ATEX Protection by encapsulation ll 2 G Ex mb ll T4 Gb and ll 2 D Ex tb IIIC T130°C Db IP65

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

IP67

Dust protected and protected against immersion in water

Orifice

50mm

Valve orifice or sealing face with diameter 50mm

55mm

Valve orifice or sealing face with diameter 55mm

Operation

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Voltage

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow

Can control flow in both directions

Flow Control

Flow regulation to control the amount of flow.

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback - Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback - Open + Closed

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication - Visual

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Only Show Items In Stock

Show spare parts

More 2 plastic water valves - normally closed

Filter Products

37 IN STOCK

33 IN STOCK

11 IN STOCK

3 IN STOCK