3/8 PTFE chemical solenoid valve 0-5 Bar 2/2 Normally Closed SVC203
£272.02
£335.54 incl. VATDescription
3/8 inch PTFE solenoid valve for acids and alkali CS Fluid Power SVC203.
Function: 2/2 way normally closed with isolating diaphragm
Operation: direct acting
Port: 3/8 BSP, option NPT or Rc thread.
Body: PTFE
Seals: PTFE
Media: most acids, alkali\'s, Hydrochloric Acid (HCL), Sulphuric Acid (H2SO4) and corrosive fluids under 50 CST and gases compatible with PTFE. (Not vacuum).
Orifice: 3.0mm or 6.0mm
Pressure: 0 to 5 Bar or 0 to 1 Bar according to orifice and coil
Kv flow factor: 3.71 or 16.01 L/min according to orifice, based on water with 1 Bar pressure drop.
Coil: RF2 18 watt UL CSA CE and IP54 Class F coil 100% duty rated.
Protection: IP54 30cm flying lead wires
Coil option: WPG2 18 Watt IP67 UL CSA approved DIN43650A
Protection: IP65 with LED connector (included)
Coil option: ATEX EExmIIT4 for hazardous area zones 21 and 22 with 50% pressure reduction.
Voltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC 50/60 Hz.
Technical Specification
Brand: CS Fluid Power
Model: SVC203
Width: 50.00 mm
Height: 112.00 mm
Depth: 50.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid
Body Material: PTFE
Voltage: 110vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 3/8 Inch
Function: 2/2 Normally Closed
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar
Seals: PTFE (Teflon)
Approvals: ATEX Zone II GD, ATEX Exm, IP54, IP65, IP67, CSA, UL
Media: Fluid >50cSt (Stong Acid/Alkali), Gases (Strong Acid/Alkali)
Options required: Mounting Holes
Orifice: 3.0mm, 6.0mm