1/4, 3/8, 1/2, PTFE chemical solenoid valve 0-3 Bar 2/2 Normally Closed + Open (PE220) 5mm
£145.19
£203.11 incl. VATDescription
PTFE solenoid valve for acid and alkali PE220 + PE220N
Function: 2/2 way normally closed or normally open
Operation: Direct acting with isolating diaphragm
Port: 1/4, 3/8 or 1/2 BSP, option NPT thread
Pressure: 0 to 3 Bar (Tested 4.5 Bar)
Orifice: 5.0mm
Seals: PTFE encapsulated NBR
Body: PTFE
Outer parts: 316 stainless steel
Media: Strong acids and alkali, Hydrochloric Acid (HCL), Sulphuric Acid (H2SO4), Bromine and aggressive corrosive fluids under 50 CST and gases compatible with PTFE but not vacuum or suction applications.
Ambient Temperature: -10°C to +60°C Max
Media Temperature: -10°C to +90°C Max
Coil: 18.5 Watt Nass Magnet CE IP65 Class H DIN43650A 100% duty rated.
Protection: IP65 with connector (included)
Voltages: 24vDC, 110vDC 220vDC or AC 50/60Hz 24vAC, 110vAC, 230vAC are supplied with rectified connector that converts AC supply to DC output for DC coil (Included).
Coil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb, 24vDC only Pressure 0.1 to 0.5 Bar is now a custom option upon request.
Model: PE220T 0.1 to 1 Bar removed from range and replaced with PE220H higher pressure series.
Technical Specification
Brand: Shako Co Ltd
Model: PE220
Width: 50.00 mm
Height: 105.00 mm
Depth: 50.00 mm
Weight: 0.51 kg
Valve / Product Type: Solenoid
Body Material: PTFE
Voltage: 110vAC, 110vDC, 200vDC, 230VAC, 24vAC, 24vDC, 48vAC, 48vDC
Port Size: 1/2 Inch, 1/4 Inch, 3/8 Inch
Function: 2/2 Normally Closed, 2/2 Normally Open
Operation: Assisted Lift, Direct Acting
Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar
Seals: PTFE (Teflon)
Media: Fluid >50cSt (Stong Acid/Alkali), Gases (Strong Acid/Alkali)
Orifice: 5.0mm
Approvals: IP65