3/4 Water irrigation solenoid valve 0.65-10 Bar 2/2 latching 6-40vDC (PN22506AL) 25mm

£26.98

£37.16 incl. VAT
£22.48 ex. VAT

Brand: Connexion

Model: PN22506AL

Stock: 200 in stock

Read Full Description

Description

3/4 inch Water irrigation Solenoid Valve PN22506AL
Function: 2/2 way latching / bi-stable
Operation: Pressure assisted (min 0.65 Bar pressure differential)
Port: 3/4 BSP, option NPT thread.
Pressure: 0.65 Bar to 10 Bar (150 psi)
Body: PA66 Glass Filled heavy duty Corrosion and UV resistant
Included: Anti-water hammer design, flow controller, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve
Internals: stainless steel
Seals: NBR
Orifice: 25mm
Kv flow factor: 7.7 cubic meters an hour based on 1 psi pressure drop.
Media temperature: +60°C Max (140°F).
Coil: IP66 2.2 Watt with 30cm lead wires 100% duty rated.
Voltages: Any 6 to 40 volt DC supply (Requires 4700μf capacitor) pulse 20 to 100 millisecond.

The PN22506AL latching function requires short electrical 6 volt to 40 volt DC pulse to stay open and then reverse polarity pulse to stay closed (swap +ve and -ve), repeat cycle for open and closed function. Requires 4700μf capacitor in circuit.

Ideally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.

Technical Specification

Brand: Connexion

Model: PN22506AL

Width: 44.00 mm

Height: 133.00 mm

Depth: 119.00 mm

Weight: 0.51 kg

Valve / Product Type: Flow rate control, Solenoid

Body Material: Nylon

Voltage: 12vDC, 24vDC, 6vDC

Port Size: 3/4 thread

Function: 2/2 Latching

Operation: Pressure Assisted

Pressure Maximum: 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar

Seals: NBR

Approvals: IP66

Media: Water

Options required: Anti Water Hammer, Flow Control, Manual Override

Orifice: 25mm