Solenoid valve world - More Latching Plastic Water Solenoid Valves

Valve / Product Type

Flow rate control

Flow regulating valves with manual or electric modulating 4-20mA control.

Motor Actuated

Solenoid

Valves controlled by electrical signal via a solenoid or electro magnet.

Port Size

Media

Body Material

Delrin (POM)

Nylon

UPVC

Function

2/2 Normally Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Latching

2 ports (inlet/outlet) with 2 positions (Open/Closed) - short power pulse valve stays open - reverse power pulse valve stays closed

Power Open/Power Close

Valve requires power to open and power to close, no power valves stays in position.

Pressure Maximum

Seals

ECO

ECO – Epichlorohydrin Rubber (Epichlorohydrin - or Herchlor, Gechron or Hydrin). excellent resistance to acids, alkali's and ozone -35°C to +125°C

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

HNBR

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

Hypalon

Hypalon is a chlorosulfonated polyethylene (CSPE) synthetic rubber (CSM). Good for chemicals, ozone, ultraviolet light, oxidising agents, hot water, corrosive chemicals, low gas permeability, good electrical properties, low flammability. -35°C to +125°C. Poor to fair fuel resistance and its low temperature properties are generally limited.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

Neoprene

Neoprene known as CR or Chloroprene. Good resistance to Freon and ammonia, flames, excellent UV resistance, Ozone, oxygen and sunlight, tough, abrasion resistant and has a low compression set with an outstanding ability to adhere to metals. -20°C to +110°C.

Silicone

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

VST

VST (Viton-Silicone-Teflon). Has enhanced chemical resistance compared to Viton, especially against aggressive chemicals like ketones, esters, and some organic acids. Combines the properties of Viton, silicone, and Teflon, offering improved flexibility, compression set resistance, and low-temperature performance compared to standard Viton. -40°C to 200°C

Approvals

IP65

Dust tight and protected against water jets

IP66

Dust protected and protected against powerful water jets.

IP67

Dust protected and protected against immersion in water

IPX0 (Faston Tag)

No protection against foreign object or water ingress.

CSA

CSA approval certifies products for safety and performance, conducted by the Canadian Standards Association.

UL

UL (Underwriters Laboratories) approval indicates that a product has met safety standards set by UL for electrical devices and components.

WRAS

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

11mm

Valve orifice or sealing face with diameter 11mm

15mm

Valve orifice or sealing face with diameter 15mm

20mm

Valve orifice or sealing face with diameter 20mm

25mm

Valve orifice or sealing face with diameter 25mm

35mm

Valve orifice or sealing face with diameter 35mm

40mm

Valve orifice or sealing face with diameter 40mm

50mm

Valve orifice or sealing face with diameter 50mm

80mm

Valve orifice or sealing face with diameter 80mm

Operation

Assisted Lift

Assisted lift solenoid valve assists in opening against pressure, ensuring reliable operation from vacuum to medium pressure systems.

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Voltage

6vDC

6 volts Direct Current

12vDC

12 volts Direct Current

24vDC

24 volts Direct Current

24vAC

24 volts 50/60Hz Alternating Current

110vAC

110 volts 50/60Hz Alternating Current

230VAC

230 volts 50/60Hz Alternating Current

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow

Can control flow in both directions

Flow Control

Flow regulation to control the amount of flow.

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback - Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback - Open + Closed

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication - Visual

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Shading Ring - without

The copper shading ring in the solenoid tube has been removed, for DC voltages only and typically for aggressive media applications.

Only Show Items In Stock

Hide spare parts

More Latching Plastic Water Solenoid Valves

3/8 Plastic water solenoid valves - latching

3/4 Plastic water solenoid valves - latching

3 Plastic water solenoid valves - latching

2 Plastic water solenoid valves - latching

11/4 Plastic water solenoid valves - latching

11/2 Plastic water solenoid valves - latching

1/4 Plastic water solenoid valves - latching

1/2 Plastic water solenoid valves - latching

1 Plastic water solenoid valves - latching

Filters

1193 IN STOCK

535 IN STOCK

374 IN STOCK

212 IN STOCK

204 IN STOCK

177 IN STOCK

152 IN STOCK

137 IN STOCK

136 IN STOCK

136 IN STOCK