3/4 BSP Motor ball valve WRAS 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM06S
3/4 inch Motor Actuated WRAS Approved Ball Valve Mini series ABVM06S ®.\n\nActuator:\nCycle life: 100,000+ open/close\nOpen / Close times: 9-24 volt: Open 4 second / close 4 seconds OR 110-240 volt: Open 4 seconds / Close 6 seconds\nPower: 9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA, Initial 10mSec inrush +50% Max.)\n110-240 volt: 2 to 5 Watts, 50 to 100mA. (For Failsafe capacitor when fully charged 50mA 2 Watts Max)\n\nProtection: IP67\nTemperature: -15°C to +50°C ambient. \nVoltage: 6 to 24 volt AC/DC or 110 to 240 volt AC with multi voltage technology. (Manual override version 9-35 volt)\nIncludes: visual position indication.\nControl options: Failsafe Closed, Failsafe Open, or Power Open/Power Close.\n\nBall Valve:\nWRAS approved certificate number 2010303\n3/4 BSP thread, option NPT thread\nBore: 20.0mm \nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water suitable with stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM06S/9AR + ABVM06S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM06S/9AR-NO + ABVM06S/2AR-NO)\n\nFailsafe: Requires 15 second power ON when out of the box to charge, thereafter minimum 10 second power ON when energised for recharging.\nWill draw less than 0.22 Watt when powered and not moving.\n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.\nPower to GREEN valve opens or power off valve closes. (ABVM06S/2 and ABVM06S/9)\n\n4.Control voltage 9 to 24v AC/DC (9) or 110 to 240vAC (2)\n\nOther options.\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.\nAvailable 9 to 24 volt only. (ABVM06S/9AR-MO, ABVM06S/9AR-NO-MO, ABVM06S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors if ordered with manual override system).\n\nE2 Position Switches = Position OPEN and CLOSED volt free feed back (no voltage supplied from actuator).\nRating 0 to 36vDC 0.4 Amp Max. (ABVM06S/9AR-E2, ABVM06S/2AR-E2, ABVM06S/9-E2, ABVM06S/2-E2)\n\nIdeal for dirty or clean water drainage for caravans, canal boats, motor homes, HVAC, solar water heating, solar thermal system, water recycling, rainwater system, BMS building management systems, communal and district heating systems, tenant heat meter services, harvested grey water systems, home energy control systems, building zone applications and heating metering systems.\n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM/9AR (a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator) to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 28th February 2023 the valve has opened and closed, 1,178,800 times and still working perfectly.
2387 in stock