Solenoid Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 12v to 380v

Nass Magnet Solenoid Valve Coil System 13/30\nBore: 14.6mm, top plate 10mm\nHeight: 42mm\nWidth: 30mm\nLength: 39mm\nED 100%, Class H, protection according to EN 60529 IP65 with connector.\nConnection: according to: DIN EN 175301803-A\nMaterial: Thermoset resin\nVoltage tolerance: -10% to +10%\nAmbient Temperature: -20°C +50°C\n\nVoltages:\n12vAC 50/60Hz (12vdc with bridge rectifier connector)\n12vDC 15 Watt 9.7Ω\n24vAC 19.3VA 6.2 Ω\n24vDC 15 Watt 37.8 Ω\n48vAC 50/60Hz 19VA 24.3 Ω\n48vDC 10.9 Watts 20.5 Ω\n64vAC 37.8 Ω\n110vAC 50/60Hz 17.6VA 135 Ω\n110vDC 17 Watts 69 Ω\n220vDC 18 Watt 338 Ω\n240vAC 50/60Hz, 17.6VA 701 Ω\n380vAC 22VA 2002 Ω\n\nFits all Shako solenoid 2/2 way 3/8 to 2\" valves: PU220A, PU225A, PU225S, PU225H, PU225X, SPU220 and SPU225 series

6312 in stock Model: 22003

3/4 Electrically Actuated WRAS Ball Valve 9-24vAC/DC or 110-240vAC ABVM06S

3/4 inch Motor Actuated WRAS Approved Ball Valve Mini series ABVM06S ®.\n\nActuator:\nCycle life: 100,000+ open/close\nOpen / Close times: 9-24 volt: Open 4 second / close 4 seconds OR 110-240 volt: Open 4 seconds / Close 6 seconds\nPower: 9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA, Initial 10mSec inrush +50% Max.)\n110-240 volt: 2 to 5 Watts, 50 to 100mA. (For Failsafe capacitor when fully charged 50mA 2 Watts Max)\n\nProtection: IP67\nTemperature: -15°C to +50°C ambient. \nVoltage: 6 to 24 volt AC/DC or 110 to 240 volt AC with multi voltage technology. (Manual override version 9-35 volt)\nIncludes: visual position indication.\nControl options: Failsafe Closed, Failsafe Open, or Power Open/Power Close.\n\nBall Valve:\nWRAS approved certificate number 2010303\n3/4 BSP thread, option NPT thread\nBore: 20.0mm \nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water suitable with stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM06S/9AR + ABVM06S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM06S/9AR-NO + ABVM06S/2AR-NO)\n\nFailsafe: Requires 15 second power ON when out of the box to charge, thereafter minimum 10 second power ON when energised for recharging.\nWill draw less than 0.22 Watt when powered and not moving.\n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.\nPower to GREEN valve opens or power off valve closes. (ABVM06S/2 and ABVM06S/9)\n\n4.Control voltage 9 to 24v AC/DC (9) or 110 to 240vAC (2)\n\nOther options.\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.\nAvailable 9 to 24 volt only. (ABVM06S/9AR-MO, ABVM06S/9AR-NO-MO, ABVM06S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors if ordered with manual override system).\n\nE2 Position Switches = Position OPEN and CLOSED volt free feed back (no voltage supplied from actuator).\nRating 0 to 36vDC 0.4 Amp Max. (ABVM06S/9AR-E2, ABVM06S/2AR-E2, ABVM06S/9-E2, ABVM06S/2-E2)\n\nIdeal for dirty or clean water drainage for caravans, canal boats, motor homes, HVAC, solar water heating, solar thermal system, water recycling, rainwater system, BMS building management systems, communal and district heating systems, tenant heat meter services, harvested grey water systems, home energy control systems, building zone applications and heating metering systems.\n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM/9AR (a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator) to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 28th February 2023 the valve has opened and closed, 1,178,800 times and still working perfectly.

2416 in stock Model: ABVM06S

1/2 Electrically Actuated WRAS Ball Valve 9-24vAC/DC or 110-240vAC ABVM04S

1/2 inch Motor Actuated WRAS Approved Ball Valve Mini series ABVM04S ®.\n\nActuator:\nCycle life: 100,000+ open/close\nOpen / Close times: 9-24 volt: Open 4 second / close 4 seconds OR 110-240 volt: Open 4 seconds / Close 6 seconds\nPower: 9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA, Initial 10mSec inrush +50% Max.)\n110-240 volt: 2 to 5 Watts, 50 to 100mA. (For Failsafe capacitor when fully charged 50mA 2 Watts Max)\n\nProtection: IP67\nTemperature: -15°C to +50°C ambient. \nVoltage: 6 to 24 volt AC/DC or 110 to 240 volt AC with multi voltage technology. (Manual override version 9-35 volt)\nIncludes: visual position indication.\nControl options: Failsafe Closed, Failsafe Open or Power Open/Power Close.\n\nBall Valve:\nWRAS approved certificate number 2010303\n1/2 BSP thread, option NPT thread\nBore: 15.0mm \nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water suitable with stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM04S/9AR + ABVM04S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM04S/9AR-NO + ABVM04S/2AR-NO)\n\nFailsafe: Requires 15 second power ON when out of the box to charge, thereafter minimum 10 second power ON when energised for recharging. \nWill draw less than 0.22 Watt when powered and not moving.\n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire. \nPower to GREEN valve opens or power off valve closes. (ABVM04S/2 and ABVM04S/9)\n\n4. Control voltage 9 to 24v AC/DC (9) or 110 to 240vAC (2)\n\nOther options.\nManual Over Ride = Button Lift + Twist will open/close valve and disengage motor, push back down to reengage motor. \nAvailable 9 to 24 volt only. (ABVM04S/9AR-MO, ABVM04S/9AR-NO-MO, ABVM04S/9-MO)\n\nABVM Weather Cover (recommended for use out doors if ordered with manual override system).\n\nE2 Position Switches = Position OPEN and CLOSED volt free feed back (no voltage supplied from actuator). \nRating 0 to 36vDC 0.4 Amp Max. (ABVM04S/9AR-E2, ABVM04S/2AR-E2, ABVM04S/9-E2, ABVM04S/2-E2) \n\nIdeal for dirty or clean water drainage for caravans, canal boats, motor homes, HVAC, solar water heating, solar thermal system, water recycling, rainwater system, BMS building management systems, communal and district heating systems, tenant heat meter services, harvested grey water systems, home energy control systems, building zone applications and heating metering systems.\n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM04S/9AR (a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator) to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 28th February 2023 the valve has opened and closed, 1,178,800 times and still working perfectly.

2250 in stock Model: ABVM04S

1 Electrically Actuated WRAS Ball Valve 9-24vAC/DC or 110-240vAC ABVM08S

1 inch Motor Actuated WRAS Certified Ball Valve Mini series ABVM08S ®.\n\nActuator:\nCycle life: 100,000+ open/close\nOpen / Close times: 9-24 volt: Open 4 second / close 4 seconds OR 110-240 volt: Open 4 seconds / Close 6 seconds\nPower: 9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA, Initial 10mSec inrush +50% Max.)\n110-240 volt: 2 to 5 Watts, 50 to 100mA. (For Failsafe capacitor when fully charged 50mA 2 Watts Max)\n\nProtection: IP67\nTemperature: -15°C to +50°C ambient. \nVoltage: 6 to 24 volt AC/DC or 110 to 240 volt AC with multi voltage technology. (Manual override version 9-35 volt)\nIncludes: visual position indication.\nControl options: Failsafe Closed, Failsafe Open, or Power Open/Power Close.\n\nBall Valve:\nWRAS approved certificate number 2010303\n1 BSP thread, option NPT thread\nBore: 25.0mm \nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water suitable with stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM08S/9AR + ABVM08S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM08S/9AR-NO + ABVM08S/2AR-NO)\n\nFailsafe: Requires 15 second power ON when out of the box to charge, thereafter minimum 10 second power ON when energised for recharging.\nWill draw less than 0.22 Watt when powered and not moving.\n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.\nPower to GREEN valve opens or power off valve closes. (ABVM08S/2 and ABVM08S/9)\n\n4. Control voltage 9 to 24v AC/DC (9) or 110 to 240vAC (2)\n\nOther options.\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.\nAvailable 9 to 24 volt only. (ABVM08S/9AR-MO, ABVM08S/9AR-NO-MO, ABVM08S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors if ordered with manual override system).\n\nE2 Position Switches = Position OPEN and CLOSED volt free feed back (no voltage supplied from actuator).\nRating 0 to 36vDC 0.4 Amp Max. (ABVM08S/9AR-E2, ABVM08S/2AR-E2, ABVM08S/9-E2, ABVM08S/2-E2)\n\nIdeal for dirty or clean water drainage for caravans, canal boats, motor homes, HVAC, solar water heating, solar thermal system, water recycling, rainwater system, BMS building management systems, communal and district heating systems, tenant heat meter services, harvested grey water systems, home energy control systems, building zone applications and heating metering systems.\n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM08S/9AR (a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator) to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 28th February 2023 the valve has opened and closed, 1,178,800 times and still working perfectly.

1088 in stock Model: ABVM08S

Solenoid Coil Core 13.2mm, H 38.7mm, W 36mm, L 47.3mm, 31400

Solenoid valve coil 36mm width 31400\nInsulation: Class F 155°C or class H 180°C\nConnection: DIN43650A\nBore: 13.2mm\nHeight: 38.7mm\nWidth: 36mm\nLength: 47.3 mm\nPower: 21 Watts\nPower: AC 50/60 Hz = Inrush 48VA with Holding 26VA. \nVoltages: 12vDC, 24vDC, 48vDC, 80vDC and 200vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz\nResistance: \n12vDC 5Ω\n24vDC 26.6Ω\n110vAC 97Ω\n220vAC 402Ω

773 in stock Model: 31400