Search Results

Search results for "0"

Electrical Connector 2P+E Form A without circuit IP65

DIN43650A square electrical connector without circuit for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nConduit entry: PG9 (thread M20x1.5mm), option PG6 or PG11\nVoltages: 0 to 250 volts AC/DC\nCurrent: 16 Amp maximum\nCircuit: non\nProtection: IP65

3106 in stock Model: DIN2

Electrical Connector 2P+E Industrial Form B without circuit IP65

DIN IP65 43650B Industrial Form Hirschmann Connector, 11mm between pins\nGland: PG9 for cable diameter 6 to 8mm \nVoltage: 0 to 250 Volts\nResistance: 4 mOhm Max\nCurrent: 10 Amps max (without circuit), 1 Amp maximum with circuit. \nConnection: DIN43650B industrial form is with PG9 cable entry for 6 to 8mm\nGasket: NBR\nProtection: IP65\nWire connection: clamping contact. \nOption: conduit entry 5 to 6mm or 1/2 NPT conduit entry, with LED, with VDR varistor and Rectified

2344 in stock Model: DIN1-industrial-form-B

1/8 Brass Solenoid Valve 0-8.5 Bar 2/2 Normally Closed 1.5mm

1/8 inch small Brass solenoid valve Shako PU220AR-01\nFunction: 2/2 way normally closed \nOperation: direct acting\nPort: 1/8 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 7 Bar (DC Voltage)\nBody: Brass\nInernals: stainless steel\nSeals: NBR standard, option FKM, EPDM or HNBR\nOrifice: 1.5mm\nKv flow factor: 1.2 L/Min based on water with 1 Bar pressure drop.\nMedia: air, water, vacuum, light oils, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, kerosene, fuel and any other gases and fluids under 40CST that are compatible with the materials of construction.\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. \nVoltages: 6vDC, 12vdc, 24vdc, 48vdc, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.

827 in stock Model: PU22001AR

1/2 WRAS Solenoid Valve 0-7 Bar 2/2 Normally Closed Brass

1/2 inch WRAS approved Brass water solenoid valve PU220D-04\nFunction: 2/2 way normally closed with anti water hammer design (slowed close)\nPort: 1/2 BSPP thread, option NPT or Rc Thread\nPressure: 0 to 7 Bar (AC) or 0 to 6 Bar (DC Voltage) with 15 Watt Coil.\nPressure: 0 to 10 Bar with 18.5 Watt Coil.\nOperation: Assisted Lift (Zero Rated)\nTemperature: -5°C to +90°C Max\nBody: Brass\nInternals: stainless steel\nSeals: EPDM WRAS approved\nOrifice: 13mm\nKv flow factor: 59L/Min based on water with a 1 bar pressure difference.\nCoil: 15 Watt system 13/30 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.\nCoil: 18.5 Watt system 13/36 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.\nProtection: IP65 with electrical connector (Included).\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 220vAC, 230vAC, 240vAC or 380vAC 50/60hz.\n\nWRAS Certificate Number 1704353, tested and approved until April 2022. Test procedure 200,000 open and close cycles at 7 Bar +90°C hot and 25°C cold water, then a final 10.5 Bar pressure leak and function test.

597 in stock Model: PU220D-04

1/4 Brass Solenoid Valve 0-8.5Bar 2/2 Normally Closed 2.3mm

1/4 inch Brass solenoid valve Shako PU220AR-02\nFunction: 2/2 way normally closed \nOperation: direct acting\nPort: 1/4 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 7 Bar (DC Voltage)\nBody: Brass\nInternals: stainless steel\nSeals: NBR standard, option FKM, EPDM or HNBR\nMedia: air, water, vacuum, light oils, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, kerosene, fuel and any other gases and fluids under 40CST that are compatible with the materials of construction.\nOrifice: 2.3mm\nKv flow factor: 2.0 L/Min based on water with 1 Bar pressure drop.\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. \nVoltages: 6vDC, 12vDC, 24vDC, 48vDC, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.\nIncludes M4x0.8 mounting holes

576 in stock Model: PU22002AR