Search Results

Search results for "DIN2"

Female 3P+E DIN 43650 A Solenoid Connector Hirschmann

Solenoid valve DIN ISO4400 electrical Hirschmann connector Form A DIN 43650A 28mm square PG9-11mm is a 1 piece electrical connector without circuitry 0 to 250 volts AC or DC and 16 Amp maximum current, offering IP65 protection for safe area non-hazardous use. Fits CEME, Parker, Asco, Sirai, Festo, M&M, ODE, ACL, Shako, Burkert solenoid valves

3439 in stock Model: DIN2

Electrical Connector Form A with Bridge Rectifier

Solenoid valve electrical Hirschmann connector 0 to 250 volt 1.5 Amp Maximum DIN 43650 Form A ISO 4400 (EN 175301-803) standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover Square electrical enclosure Connector with full bridge rectifier (converts AC supply to DC outlet) and VDR Varistor bipolar circuit protection with voltage options for 12v, 24v, 48v, 120v or 230volt. Drop off delay Max 3mSec power consumption 5mAmp Maximum Resistance 4 mOhm maximum. Conduit entry PG9 (cable entry 6mm to 8mm) or M20x1.5mm with grommet removed, Seals NBR LABS-free (Grommet, gasket and cover gasket), Max 250 volts max resistance up to 4 mOhm, with clamping contact with wire protecting plate, housing and terminal block in Polyamide, ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h), central fixing screw in St 4.8 zinc plated, contacts CuZn, Sn/Cu plated. Temperature -25°C to +125°C. Wire 0.5 to 1.5mm sectional area. Circuit 08

240 in stock Model: DIN2-R

Electrical Connector Form A with Red LED

Field attachable solenoid valve electrical connector 0 to 250 volt 1 Amp maximum DIN 43650 Form A ISO 4400 EN 175301-803) standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover Square electrical enclosure Connector with RED LED bipolar circuit protection with voltage options for 12v, 24v, 48v, 120v or 230volt and Yellow or Green LED. Drop off delay Max 3mSec power consumption 5mAmp Maximum Resistance 4 mOhm maximum. Conduit entry PG9 (cable entry 6mm to 8mm) or M20x1.5mm with grommet removed, Seals NBR LABS-free 6 Grommet, gasket and cover gasket), max resistance up to 4 mOhm, with clamping contact with wire protecting plate, housing and terminal block in Polyamide, ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h), central fixing screw in St 4.8 zinc plated, contacts CuZn, Sn/Cu plated. Temperature -25°C to +125°C. Wire 0.5 to 1.5mm sectional area. Circuit 01

171 in stock Model: DIN2-LEDR

Electrical Connector Form A with LED and VDR

Solenoid valve electrical connector 0 to 250 volt 1 Amp Maximum DIN 43650 Form A ISO 4400 (EN 175301-803) standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover Square electrical enclosure Connector with RED LED and VDR Varistor bipolar circuit protection with voltage options for 12v, 24v, 48v, 120v or 230volt and Yellow or Green LED. Drop off delay Max 3mSec power consumption 5mAmp Maximum Resistance 4 mOhm maximum. Conduit entry PG9 (cable entry 6mm to 8mm) or M20x1.5mm with grommet removed, Seals NBR LABS-free 6 Grommet, gasket and cover gasket), max resistance up to 4 mOhm, with clamping contact with wire protecting plate, housing and terminal block in Polyamide, ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h), central fixing screw in St 4.8 zinc plated, contacts CuZn, Sn/Cu plated. Temperature -25°C to +125°C. Wire 0.5 to 1.5mm sectional area. Circuit 03

169 in stock Model: DIN2-LED-VDR

Electrical Connector Form A ISO4400 Bridge Rectifier Red LED

Solenoid valve electrical connector 0 to 250 volt 1.5 Amp Maximum DIN 43650 Form A ISO 4400 (EN 175301-803) standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover Square electrical enclosure Connector with full bridge rectifier (converts AC supply to DC outlet), VDR Varistor and Red LED with bipolar circuit protection. Voltage options for 12v, 24v, 48v, 120v or 230volt. Drop off delay Max 3mSec power consumption 5mAmp Maximum Resistance 4 mOhm maximum. Conduit entry PG9 (cable entry 6mm to 8mm) or M20x1.5mm with grommet removed, Seals NBR LABS-free (Grommet, gasket and cover gasket), Max 250 volts max resistance up to 4 mOhm, with clamping contact with wire protecting plate, housing and terminal block in Polyamide, ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h), central fixing screw in St 4.8 zinc plated, contacts CuZn, Sn/Cu plated. Temperature -25°C to +125°C. Wire 0.5 to 1.5mm sectional area. LED colour options include Yellow and Green LED - Circuit 09

168 in stock Model: DIN2R-LED

Electrical Connector Form A with 11-89% Energy Saving

Form A DIN43650A PWM 11% to 89% energy saving electrical DIN connector with Pulse Width Modulating circuit provides energy savings and extends the life expectancy of the solenoid valve or coaxial valve coil. The PWM connector receives a nominal voltage 12 to 24 volt DC in order to fully energise the valve solenoid allowing the solenoid valve coil to achieve the full inrush current and energy required to change the solenoid valve state. Then after a timed period of approximately 100 milliseconds the PWM circuit reduces the full voltage to a reliable holding power which needs to be adjusted using the 321 jumpers to the holding power criteria of the solenoid valve coil thus achieving considerable energy saving and reducing coil heat rise which in turn extends solenoid coil life. PWM modulating connector jumper settings / Hold Power Saving 000..........11% 001..........22% 010..........33% 011..........44% 100..........56% 101..........67% 110..........78% 111..........89% The power reduction is accomplished through pulses with adjustable modulation via relocation of the electrical jumpers for changes in the output voltage. Operating voltage: Vdc = 12-24vDC, Maximum current = 1 Amp, Delay = ca. 175 ms, Switching Frequency = 3.1 Khz at 24vDC, Pulse - Pulse Ratio of PWM signal = 8 variations, Polarity sensitive = Yes, Over Voltage protection = No. For optimum performance the solenoid coil technical data and electrical parameters must be observed. The PWM circuit includes a protecting diode at the output, eliminating the switch off power surges from the solenoid coil. Additional protecting components such as VDR and TVS diodes are not required. Article Number: 611-201-1042, New Ident Number 611-201-0100, forma ID 63010128 Quick Overview Form: A (Pin Distance 18mm, with circuit with electronics – PWM, Housing: Transparent, One Piece M20x1.5mm Thread, Manufacturer: Nass Magnet More Information Grommets for 6–8 mm and 8–10 mm cable diameter, Terminal block: 2 + ground, clamping contact without protecting plate, Electronics: PWM circuit for power sawing, 12–24VDC, NBR profile gasket, black, Standard central fixing screw, Not assembled and single packed in a plastic bag.

23 in stock Model: DIN2-PWM