Description
16mm Solenoid Coil 18W IP68 DIN – CS Fluid Power WPG2
CS Fluid Power WPG2 16mm Solenoid Valve Coil – 18 Watt IP68
The CS Fluid Power WPG2 is a heavy-duty 18 watt solenoid valve coil with a 16mm bore, designed for a wide range of CS Fluid Power general-purpose, high-pressure and industrial solenoid valves.
Also identified by the WP-G2-D marking on the coil body, this robust replacement coil features Class H 180°C insulation, an ISO DIN 43650A electrical connection and IP68 protected coil construction.
Available in DC and AC voltages from 12VDC through to 380VAC, the WPG2 is suitable for new valve assemblies, replacement coils and maintenance spares across numerous CS Fluid Power valve series.
Coil Dimensions
Bore: 16mm
Height: 40.5mm
Width: 41.5mm
Length: 59mm
Connection: ISO DIN 43650A
Electrical Specification
DC Power: 18 Watts
AC Power: 11.5–18.7VA depending on voltage and frequency
Frequency: 50/60Hz
Insulation Class: Class H 180°C
Available voltages:
✓ 12VDC
✓ 24VDC
✓ 48VDC
✓ 24VAC 50/60Hz
✓ 48VAC 50/60Hz
✓ 110VAC 50/60Hz
✓ 230VAC 50/60Hz
✓ 380VAC 50/60Hz
Coil Resistance & Power
12VDC → 18W → 5.5Ω
24VDC → 18W → 25.3Ω
24VAC → 13.4VA at 50Hz / 11.5VA at 60Hz → 3.5Ω
110VAC → 17VA at 50Hz / 14VA at 60Hz → 72.7Ω
220VAC → 16.2VA at 50Hz / 13.4VA at 60Hz → 323Ω
230VAC → 16.2VA at 50Hz / 13.4VA at 60Hz → 323Ω
240VAC → 18.7VA at 50Hz / 15.3VA at 60Hz → 323Ω
Important: Electrical power and resistance vary according to the selected voltage and frequency. Always select the correct coil voltage for the available electrical supply.
IP68 Coil Protection
The WPG2 coil itself is rated IP68.
When used with the standard DIN 43650A IP67 connector, the overall assembled electrical protection is IP67, as the complete assembly is limited by the connector protection rating.
Approvals
✓ IP68 Coil Protection
✓ UL Approved
✓ CSA Approved
✓ CE Registered
Compatible CS Fluid Power Solenoid Valves
The WPG2 16mm coil is used across an extensive range of CS Fluid Power solenoid valves, including:
✓ AD6100 / AD8100
✓ ADS6100 / ADS8100
✓ AD12
✓ AD15 / AD20 / AD25
✓ AD35 / AD40 / AD50
✓ ADS12
✓ ADS15 / ADS20 / ADS25
✓ ADS35 / ADS40 / ADS50
✓ SA10
✓ ADF Series
✓ SAP / SAPS Series
✓ SAHH / SAHHH Series
✓ SASH / SASHH / SASHHH Series
✓ VX / VXS Series
✓ ADSF Series
✓ NOAD612
✓ NOHPV / NOHPVS
✓ NOS812
✓ SA / SAF Series
✓ NOSA / NOSAF Series
✓ NOPA Series
This broad compatibility makes the WPG2 particularly useful as a replacement or spare coil for existing CS Fluid Power valve installations.
Optional Flying Lead Version
The WPG2-F version is available with approximately 30cm flying lead wires where a DIN electrical connector is not required.
Selecting a Replacement WPG2 Coil
Before ordering, check:
✓ Existing coil voltage
✓ AC or DC power supply
✓ 16mm armature tube diameter
✓ DIN 43650A connection
✓ Compatible CS Fluid Power valve series
Do not select a replacement coil based solely on its external dimensions, as electrically different coils may use similar housings.
Typical Applications
✓ Industrial solenoid valves
✓ High-pressure solenoid valves
✓ Compressed air systems
✓ Water control equipment
✓ Process control systems
✓ Hydraulic equipment
✓ Industrial automation
✓ OEM machinery
✓ Replacement valve coils
✓ Maintenance spare parts
Related Products & Categories
