1/8 1/4 solenoid valve 1-16 Bar 2/2 Proportional
£153.59
£189.42 incl. VATDescription
1/8 1/4 inch Proportional solenoid valve GEM-PR
Function: 2/2 way normally closed
Operation: Direct acting
Port: 1/8 or 1/4 BSP thread, option NPT thread
Body: Brass, option 316 Stainless steel or Aluminium
Internals: stainless steel
Seals: NBR, Viton or EPDM
Guide rings: PTFE
Media: Neutral gases, water, oil and other fluids under 21 CST or gases compatible with materials of construction
Pressure: 2 to 16 Bar according to orifice
Orifice: 0.8mm, 1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.0mm or 4.0mm
Kv flow factor: 0.6 to 5 L/min according to orifice
Proportional Control: 100 to 500 mAmp signal
Accuracy: Hysteresis <5%, Repeatability <3% and sensitivity <2% of F.S.
Voltage: 24vDC
Guidelines for use:
The pressure drop on the valve should be 30-50% or higher of the total pressure drop in the system with special consideration in selecting the correct Kv by orifice size.
Better regulation performance is achieve when the maximum pressure is 1.2 times the working pressure which can be adjusted via the screw at the top of the armature core tube.
Inlet pressure should be kept constant during operation.
Technical Specification
Brand: Baccara
Model: PR
Width: 32.00 mm
Height: 73.50 mm
Depth: 32.00 mm
Weight: 0.25 kg
Valve / Product Type: Flow rate control, Solenoid
Body Material: Aluminium, Brass, Stainless Steel
Voltage: 24vDC
Port Size: 1/4 Inch, 1/8 Inch
Function: Proportional / Modulating
Operation: Pressure Assisted
Pressure Maximum: 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar
Seals: EPDM, NBR, FKM (Viton)
Approvals: IP65
Media: Air, Fluid >50cSt (Non Aggressive), Gases (Non Aggressive), Water
Options required: Mounting Holes
Orifice: 1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.0mm, 4.0mm