Key Features
✓ High-power industrial solenoid valve coil
✓ Class H 180°C insulation
✓ Higher insulation class than Class F coils
✓ Compact 36mm wide construction
✓ 13.2mm internal bore
✓ 100% continuous duty rated
✓ DIN EN 175301-803 Form A
✓ IP65 protection with suitable connector
✓ Wide range of AC and DC voltages
Solenoid Coil Core 13.2mm H38.7mm W36mm, L47.3mm, 18-20 Watt
★★★★★ 5.0 / 5 (1 review)£23.58 incl. VAT £19.65 ex. VAT
-50% Was £47.16 incl. VAT
Description
Solenoid Valve Coil 36mm Class H 31400
The 31400 Class H solenoid valve coil is a high-power industrial coil with a compact 36mm wide body, 13.2mm internal bore and standard DIN EN 175301-803 Form A electrical connection.
Designed for continuous-duty industrial applications requiring increased magnetic force, the 31400 features Class H 180°C insulation, providing a higher thermal insulation rating than comparable Class F coils.
Available in a wide range of AC and DC voltages, the 31400 is suitable for replacement, maintenance and OEM applications on compatible direct-acting, assisted-lift and pilot-operated solenoid valves.
Key Features
✓ High-power industrial solenoid valve coil
✓ Class H 180°C insulation
✓ Higher insulation class than comparable Class F coils
✓ Compact 36mm wide construction
✓ 13.2mm internal bore
✓ 100% continuous duty rated
✓ DIN EN 175301-803 Form A electrical connection
✓ IP65 protection when correctly fitted with suitable connector
✓ Wide range of AC and DC voltages
✓ Suitable for replacement and OEM applications
Dimensions
Internal Bore: 13.2mm
Height: 38.7mm
Width: 36mm
Length: 47.3mm
Electrical Specification
Duty: 100% continuous duty (ED 100%)
Insulation: Class H, 180°C
DC Power: 9–27 Watts according to voltage
AC Power: Dependent upon voltage
Frequency: 50/60Hz
Available Voltages
DC: 12V DC, 24V DC, (Optional 48V DC, 80V DC and 190V DC)
AC: 24V AC, 48V AC, 110V AC and 230V AC, 50/60Hz
Resistance & Power
12V DC: 5Ω / 20 Watts
24V DC: 26.6Ω / 18 Watts
110V AC: 97Ω / 20 Watts
230V AC: 402Ω / 20 Watts
Power and resistance values vary according to coil voltage. Always select the correct coil for the electrical supply and solenoid valve application.
Electrical Connection & Protection
Connection: DIN EN 175301-803 Form A (formerly DIN 43650A)
Protection: IP65 when correctly fitted with a suitable DIN connector
Connector: Available separately where required
Compatibility
The 31400 uses a common 36mm body / 13.2mm bore industrial solenoid coil format and is suitable for compatible solenoid valves requiring these dimensions and electrical characteristics.
It is dimensionally comparable with other compatible 36mm industrial solenoid valve coils
When replacing an existing coil, always check the 13.2mm bore, physical dimensions, voltage, AC/DC supply and electrical power requirements before installation.
Class H Temperature Advantage
The 31400 uses Class H winding insulation rated to 180°C, compared with the Class F 155°C insulation commonly used on equivalent coils.
The higher insulation class provides an additional 25°C of winding insulation thermal capability, providing increased thermal tolerance for demanding industrial and continuous-duty applications.
This is particularly beneficial with higher-power solenoid coils, where winding temperature and heat dissipation are important considerations during continuous operation.
The 180°C Class H rating refers to the electrical insulation system of the coil and does not mean that the complete solenoid valve is suitable for 180°C ambient or media temperatures.
Maximum ambient and fluid temperatures depend upon the complete valve construction, seals, armature assembly and installation conditions.
Typical Applications
Suitable for compatible solenoid valves used within:
✓ Industrial automation
✓ Pneumatic systems
✓ Air and inert gas control
✓ Water control systems
✓ Oil and compatible fluid systems
✓ Vacuum applications
✓ Process equipment
✓ OEM machinery
✓ Higher-pressure and larger-orifice solenoid valve applications
Important Replacement Information
Solenoid coils of similar dimensions are not necessarily electrically interchangeable.
Before replacing an existing FG Line C4, ACL Type 5 or other equivalent-format coil, confirm the required voltage, AC/DC supply, frequency, power rating, internal bore and physical dimensions.
Never energise a solenoid coil unless it is correctly installed onto a suitable solenoid valve armature tube.
Related Products & Categories
Technical Specification
Brand: SN ERA SIB SAS
Model: 31400
Width: 36.00 mm
Height: 38.50 mm
Depth: 47.80 mm
Weight: 0.30 kg
Voltage: 110vAC, 110vDC, 12vDC, 200vDC, 24vAC, 24vDC, 48vAC, 48vDC
Approvals:: IP65
Spares (Coils, Connectors, Seals): Coil bore 13mm
Found in these Categories
Reviews
★★★★★5.0 / 5 1 reviews
★★★★★
Brilliant service, arrived as described, machine back up and working again. Vasile
Reviewed on 26/02/2022 by Vasile