1 BSP pressure reducing valve 10-200 Bar - Manual c/w Closing Solenoid 785-P
£908.89
£1,761.58 incl. VATDescription
Manual pressure regulator with solenoid ON/OFF control type 785-P
Stepless pressure regulation.
Connection: G1 (BSP)
Pressure range: 12 to 160 Bar, 10 to 120 Bar, 5 to 64 Bar, 3 to 40 Bar, 10 to 200 Bar, 5 to 140 Bar or 3 to 80 Bar according to orifice and actuator.
Media: Liquid / fluid (50 micron)
Orifice: 10mm, 12mm, 15mm or 20mm
Kv flow factor: 3, 6, 8.3 or 14.1 M³/hr according to orifice
Body: AISI303 stainless
Seal: FKM
Temperature media: 0 to +60°C
Temperature ambient: 0 to +50°C
Electrical connection: DIN43650B industrial form
Nominal voltage: 24vDC or 230vAC
Voltage tolerance: +/- 10% according to VDE 0580
Power consumption: 24vDC 6 Watts, 230vAC 9.2VA
Protection: IP65 with connector (Included)
Duty factor: 100% ED
Mounting: Manometer preferred upright
Control air 8 Bar max filtered to 40 micron or better
Piping: Following flow-calming sections in terms of straight conduit are best.
Before the valve (P) a length of three times the internal diameter.
After the valve (T) must be free discharge of media. No dynamic pressure and minimal flow resistance must be ensured at all times.
Technical Specification
Brand: RSG
Model: 785-P
Width: 60.00 mm
Height: 143.00 mm
Depth: 169.00 mm
Weight: 2.00 kg
Valve / Product Type: Manual Control, Pressure Reducing
Body Material: Stainless Steel
Voltage: 230VAC, 24vDC
Port Size: 1 Inch
Function: 2/2 Normally Closed
Operation: Pressure Assisted
Pressure Maximum: 140 Bar, 160 Bar, 200 Bar, 40 Bar, 64 Bar, 80 Bar
Seals: FKM (Viton)
Approvals: IP65
Media: Fluid >50cSt (Non Aggressive), Oils + Fuels >50cSt Max
Options required: Manual Control
Orifice: 10mm, 12mm, 15mm, 20mm