3/8 BSP Motor ball valve WRAS 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM03S
£75.83
£101.11 incl. VATDescription
3/8 inch Motor Actuated WRAS Ball Valve Mini series ABVM03S ®.
Motor Actuator:
Open/Close: 4 to 6 seconds.
Includes: visual position indication.
Temperature (ambient): -15°C to +50°C.
Cycle life: 100,000+ open/close, 100% rated.
Power Consumption: 1 to 5 watts when moving.
Control options: Failsafe return or Power Open/Close.
Power supply: 9-24v 2 amp, 110-240v 500mA recommended.
Voltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.
Ball Valve:
Bore: 10.0mm
Pressure: 0 to 10 Bar
Body: 304 stainless steel
WRAS Certificate 2012107
Port 3/8 BSP, optional NPT thread
Seals: PTFE + EPDM (WRAS Approved).
Temperature (media): -15°C to +100°C.
Media: air or water suitable with 304 stainless steel, EPDM + PTFE.
Options to choose.
1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM03S/9AR + ABVM03S/2AR)
2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM03S/9AR-NO + ABVM03S/2AR-NO)
Failsafe actuators require minimum 30 second power ON for recharging.
3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.
Power to GREEN valve opens or power off valve closes. (ABVM03S/2 and ABVM03S/9)
4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.
Other options.
Manual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.
Available low voltage only. (ABVM03S/9AR-MO, ABVM03S/9AR-NO-MO, ABVM03S/9-MO)
ABVM Weather Cover (recommended for use outdoors or wet environments).
E2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.
Volt free feed back (no voltage supplied from actuator).
Switch rating 0 to 36vDC 0.4 Amp Max. (ABVM03S/9AR-E2, ABVM03S/2AR-E2, ABVM03S/9-E2, ABVM03S/2-E2)
Technical Specifications
Speed:
9-24 volt: Open 4 second / close 4 seconds
110-240 volt: Open 4 seconds / Close 6 seconds.
Start Power
9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.
Moving Power:
9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.)
110-240 volt: 2 to 5 Watts, 50 to 100mA.
Maximum Voltage:
Actuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.
Actuators with manual override can operate from 9 to 35 volts AC/DC.
Destruction Test.
On the 26th November 2020 at around 10.40am we connected an ABVM to a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)
As of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.
Technical Specification
Brand: Connexion
Model: ABVM03S
Width: 65.00 mm
Height: 96.00 mm
Depth: 51.00 mm
Weight: 0.40 kg
Valve / Product Type: Ball, Motor Actuated
Body Material: Stainless Steel
Voltage: 110vAC, 12vAC, 12vDC, 230VAC, 24vAC, 24vDC
Port Size: 3/8 Inch
Function: 2/2 Normally Closed, 2/2 Normally Open, Power Open/Power Close
Operation: Direct Acting
Pressure Maximum: 0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar
Seals: EPDM
Approvals: IP67, WRAS
Media: Water, Water (RO/Pure/Demin)
Options required: Anti Water Hammer, Bi-Directional Flow, Manual Override, Position Feedback - Closed, Position Feedback - Open + Closed, Position indication - Visual
Orifice: 10mm