Valve / Product Type

Air Actuated Valve

air actuated valves that utilise a compressed air supply to operate.

Ball Valve

Motor and air actuated quarter turn 2+3 way ball valves

Butterfly Valve

Butterfly valves are thin wafer pattern valves that fit between flanges.

Flow rate control

Flow regulating valves with manual or electric modulating 4-20mA control.

Motor Actuated

Port Size

Media

Body Material

Brass

Ductile Iron

Stainless Steel

Function

2/2 Normally Closed

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays closed (Failsafe) requires power to open

2/2 Normally Open

2 ports (inlet/outlet) with 2 positions (Open/Closed) - valve stays open (Failsafe) requires power to close

2/2 Double Acting

2 ports (inlet/outlet) with 2 positions (Open/Closed) - power or air one side to move - power or air opposite side to return.

Power Open/Power Close

Valve requires power to open and power to close, no power valves stays in position.

Proportional / Modulating

Valve opens proportionally according to signal input, either 4-20mA, 0-10v or 0-5 volt. Example 4mA valve closed, 8mA 25% open, 12mA 50% open, 18mA 75% open and 20mA fully open.

Pressure Maximum

Seals

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

PTFE (Teflon)

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Voltage

12vDC

12 volts Direct Current

12vAC

12 volts 50/60Hz Alternating Current

24vDC

24 volts Direct Current

24vAC

24 volts 50/60Hz Alternating Current

110vAC

110 volts 50/60Hz Alternating Current

110vDC

110 volts Direct Current

125vDC

125 volts Direct Current

230VAC

230 volts 50/60Hz Alternating Current

200vDC

200 volts Direct Current

Approvals (EN,Ex,IP,CSA,UL etc)

IP67

Dust protected and protected against immersion in water

WRAS

WRAS approval ensures water fittings meet UK water regulations, safeguarding public health by preventing contamination, waste, and misuse of water supplies.

Orifice

Options required

Anti Water Hammer

Prevents or reduces water hammer caused by sudden changes in fast moving fluid flow.

Bi-Directional Flow

Can control flow in both directions

Flow Control

Flow regulation to control the amount of flow.

Manual Override

A facility to manually move the valve into the fully actuated position via a button, lever or key.

Mounting Holes

Supplied with additional threaded holes typically in the base, typically for securing to a baseplate.

Position Feedback Closed

The valve is equipped with an additional volt free electrical switch that is triggered when the valve is mechanically closed.

Position Feedback Open+Closed

The valve is equipped with two additional volt free electrical switches that are triggered when the valve is mechanically closed or open position.

Position indication Visual

The valve is equipped with clear cover or dome under which an arrow or flag can be seen to confirm either the open and or closed position of the valve.

Only Show Items In Stock

Hide spare parts

WRAS Approved Ball Valves

Filters

3245 IN STOCK

2505 IN STOCK

2487 IN STOCK

143 IN STOCK

558 IN STOCK

233 IN STOCK

250 IN STOCK

131 IN STOCK

159 IN STOCK

30 IN STOCK

30 IN STOCK

71 IN STOCK

318 IN STOCK

71 IN STOCK

307 IN STOCK

78 IN STOCK

61 IN STOCK

80 IN STOCK

149 IN STOCK

62 IN STOCK