Search Results

Search results for "8000"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1573 in stock Model: AD8000

1/4 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/4 inch Miniature stainless solenoid valve CS Fluid Power ADS8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressure 30 Bar or more)\nVacuum: Torr 10-6 Max\nTemperature: +180°C Max according to seals\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressures over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

239 in stock Model: ADS8000

Electrical Connector 2P+2E Form A with cable IP67 0-250v

IP67 Moulded pre-wired electrical connector DIN43650A Form A pins 18mm\nDin 43650A square with 3 or 5 meter black 3 core 0.75mm2 H05WF PVC cable with stripping 30mm, green/yellow, brown and blue in single packaging\nRating: 0-250 volt 10 Amp Max\nProtection: IP67\nMaterials: terminal block PA6 GF30\nPoles 2+2E, ground position 6/12 h, contact distance 18mm\nCircuit: without circuit. \nContacts: CuZn zinc plated

189 in stock Model: DIN3-5mtr

1/2 Stainless Solenoid Valve 0.5-10 Bar 2/2 Normally Closed SPU225A-04

1/2 inch stainless steel solenoid valve Shako SPU225A-04\nFunction: 2/2 way normally closed\nOperation: pressure assisted, requires Min 0.5 Bar differential\nPort: 1/2 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option silver (AC or DC) or without ring ((DC only or AC with rectified DIN connector to DC)) for demin water, RO water, pure water and Adblue.\nOrifice 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 220vAC, 230vAC, 240vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

177 in stock Model: SPU22504

3/4 180 degree single Solenoid Valve 0.2-10 Bar Normally Closed S180

3/4 plastic washing machine water single solenoid valve S180\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with 180 degree (straight) single 104F 10.5mm or 120F 12.5mm hose tail outlet.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), UL Underwriter Laboratories certified, MOCA FCM (Food Contact Materials), NSF food certification for public health protection. \n\nThis is the most common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

131 in stock Model: S180