Key Features
✓ DN10 3/2 Way Coaxial Valve
✓ Pneumatically Pilot Operated
✓ Normally Closed or Open
✓ Zero Differential Pressure
✓ 0–100 Bar Operating Pressure
✓ 16 Bar Reverse Pressure
✓ 3–8 Bar Pilot Pressure
✓ Kv 2.5 m³/h Flow Capacity
✓ 1/4", 3/8" or 1/2" BSP
✓ Optional 3/4" BSP Connection
✓ Brass or Stainless Steel Body
✓ FKM & PTFE Seals
✓ Fluids Up To 1000 cSt
✓ -10°C to +100°C Media
✓ NAMUR Pilot Interface
✓ Vacuum Service Option
✓ Oil & Grease-Free Option
✓ Position Feedback Option
✓ Rotatable R Port Option
✓ ATEX Pilot Option
✓ Mounting Brackets Available
✓ Free UK Delivery Available
Datasheets
Description
DN10 3/2 Way Air Pilot Coaxial Valve – RSG 38110
The RSG 38110 is a DN10 3/2 way externally controlled coaxial valve designed for reliable switching, diverting and exhausting of compatible liquids and gases at pressures from 0 to 100 Bar.
Available as normally closed or normally open, the valve uses a double-acting pneumatic piston with return spring, operated by a 3–8 Bar pilot air supply. Independent pneumatic actuation allows reliable switching from zero differential pressure, making the RSG 38110 suitable for high-pressure, low-pressure and vacuum applications.
The DN10 RSG 38110 provides a manufacturer-rated Kv flow coefficient of 2.5 m³/h with standard 1/4", 3/8" or 1/2" BSP connections, plus an optional 3/4" BSP connection.
Valve Function & Operation
The RSG 38110 is available in two switching configurations.
381A10 – Normally Closed
In the normal position, the main P → A flow path is closed and the alternative flow path is selected. Applying pilot pressure switches the valve to connect the main process flow.
381B10 – Normally Open
The main P → A flow path is open in the normal position and switches to the alternative flow path when the pneumatic actuator is operated.
Because the valve is externally controlled, operation does not depend upon process pressure or require a minimum differential pressure.
DN10 Ports & Connections
Standard DN10 process connections:
✓ G1/4 BSP
✓ G3/8 BSP
✓ G1/2 BSP
Optional connections:
✓ G3/4 BSP
✓ NPT Threads
✓ Flanged Connections
✓ Special Connections
✓ Alternative R Port Orientation
The R connection can be supplied in alternative orientations to simplify installation and pipework routing within machinery and process systems.
Pressure & Performance
Operating Pressure: 0 to 100 Bar
Reverse Pressure: Up to 16 Bar
Minimum Differential: 0 Bar
Pilot Pressure: 3 to 8 Bar
Nominal Diameter: DN10
Orifice: 10mm
Kv Flow Coefficient: 2.5 m³/h
Flow paths provide:
P → A: Up to 100 Bar
A → P: Up to 16 Bar
P → R: Up to 100 Bar
R → P: Up to 16 Bar
3/2 Way Coaxial Valve Design
The RSG 38110 incorporates three process ports and two valve seats within a single coaxial valve assembly.
This allows one valve to perform functions such as:
✓ Supply & Exhaust
✓ Pressure & Return
✓ Fluid Diversion
✓ Filling & Venting
✓ Process Changeover
✓ Pressure Release
The coaxial construction provides a high-flow process path while switching force is supplied independently by the pneumatic actuator.
Switching Performance
Opening / Closing Time: 50–1000ms
Actual switching time depends upon operating pressure, pilot pressure, pilot valve selection and any exhaust-air throttling fitted to the pneumatic control circuit.
The valve can be installed in any mounting position.
High Viscosity Fluids
The RSG 38110 is suitable for compatible fluids with viscosities up to 1000 cSt.
Typical applications can include:
✓ Hydraulic Oils
✓ Lubricating Oils
✓ Thick Process Oils
✓ Viscous Process Fluids
✓ Cooling Fluids
✓ Compatible Industrial Liquids
Actual suitability depends upon viscosity, temperature, operating pressure and compatibility with the selected wetted materials.
Construction & Materials
Standard Body: Brass
Optional Body Materials:
✓ AISI 303 Stainless Steel
✓ AISI 316 Stainless Steel
Internals: Stainless Steel 316L
Stainless steel versions provide increased corrosion resistance where brass is unsuitable for the process medium or operating environment.
Standard Seal Construction
Standard sealing materials include:
✓ FKM Static Seals
✓ FKM / PTFE Dynamic Seals
✓ PTFE Seat Sealing
Optional:
✓ EPDM Seal Configuration
The appropriate sealing configuration should be selected according to the process medium and operating temperature.
Media Compatibility
The RSG 38110 can control liquids and gases compatible with the selected body and sealing materials.
Typical applications include:
✓ Hydraulic Oils
✓ Lubricating Oils
✓ Process Liquids
✓ Cooling Fluids
✓ Viscous Process Media
✓ Compatible Chemicals
✓ Compatible Gases
✓ Fluids Up To 1000 cSt
For aggressive chemicals, specialist gases or unusual process fluids, compatibility should be confirmed against all wetted materials before ordering.
Water Service Seal Option
For demanding water applications, the RSG 38110 can be configured with UHMW Polyethylene sealing.
The UHMW Polyethylene configuration provides:
✓ Maximum Temperature +80°C
✓ High Wear Resistance
✓ Excellent Abrasion Resistance
✓ Low Friction
✓ Good Lubricity
✓ Debris-Stripping Seal Action
The special sharp-edged dynamic seal has a stripping action on the piston/plunger, helping remove limescale and debris during operation. This makes the configuration particularly useful for demanding industrial water applications.
Gas Service Seal Option
For compatible gaseous media, the RSG 38110 can be configured with Fluoroloy® A21 sealing.
The Fluoroloy® A21 configuration provides:
✓ Maximum Temperature +80°C
✓ High Wear Resistance
✓ Low Friction
✓ Broad Chemical Compatibility
✓ High Gas Tightness
The actual gas, pressure and operating temperature should be specified when ordering to ensure the correct sealing configuration is selected.
Vacuum & Clean Service
A dedicated vacuum configuration is available for the RSG 381 Series.
Because switching force is supplied independently by the pneumatic actuator, the RSG 38110 is suitable for zero-pressure and vacuum applications.
An oil and grease-free configuration is also available for clean process requirements.
Temperature
Media Temperature: -10°C to +100°C
Ambient Temperature: -10°C to +50°C
Water Seal Option: Up to +80°C
Gas Seal Option: Up to +80°C
Pneumatic Pilot Specification
Actuation: External Pneumatic Pilot
Actuator: Double-Acting Piston
Return: Spring Return
Pilot Pressure: 3–8 Bar
Pilot Connection: G1/8
Interface: NAMUR
Mounting Position: Any Position
The DN10 valve uses a G1/8 pilot connection; the larger DN15–DN50 models use G1/4.
An upstream air preparation unit is recommended to provide a clean pilot-air supply and help maximise actuator service life.
NAMUR Pilot Valve Options
The NAMUR interface allows a suitable 5/2 way pilot solenoid valve to be mounted directly onto the actuator.
Available configurations include:
✓ NAMUR Pilot – Side Connections
✓ NAMUR Pilot – Top Connections
✓ M12 Solenoid Pilot
✓ 24V DC Pilot Valve
✓ 230V 50Hz Pilot Valve
Exhaust throttles and silencers can also be fitted where required.
ATEX Pilot Option
An explosion-protected electrical pilot option is available for suitable hazardous-area applications.
ATEX Pilot Marking:
II 2G Ex m II T4
II 3D IP65 T130°C
When the Ex pilot configuration is selected, permissible operating pressure is reduced by approximately 20%.
Optional Features & Accessories
Available options include:
✓ Normally Closed 381A10
✓ Normally Open 381B10
✓ Stainless Steel Body
✓ Mounting Brackets
✓ Position Indication
✓ Oil & Grease-Free Version
✓ Vacuum Configuration
✓ NAMUR Pilot Solenoid Valve
✓ Alternative R Port Orientation
✓ Exhaust Air Throttles
✓ Exhaust Silencers
✓ ATEX Pilot Option
✓ Modular Valve Systems
Position Indication
Optional inductive position switches can provide electrical confirmation of the valve's open and/or closed position.
Versions with LED indication and a 2-metre cable can be supplied for connection to PLCs, machinery controls, alarms and process monitoring systems.
Typical Applications
✓ High-Pressure Fluid Control
✓ Supply & Exhaust Systems
✓ Pressure & Return Circuits
✓ Fluid Diverting Systems
✓ Hydraulic Systems
✓ High Viscosity Fluids
✓ Lubrication Systems
✓ Process Machinery
✓ Vacuum Systems
✓ Industrial Automation
✓ Process Skids
✓ OEM Equipment
✓ Compatible Gas Systems
Why Choose the RSG 381 Series?
The RSG 381 combines 3/2 way directional control with the high-pressure capability of an externally operated coaxial process valve.
The DN10 RSG 38110 operates from zero differential pressure up to 100 Bar, provides a Kv 2.5 m³/h flow coefficient and handles compatible viscous fluids up to 1000 cSt.
With NC or NO operation, brass or stainless steel construction, specialist water and gas sealing, NAMUR pilot control and optional position feedback, the RSG 38110 provides a versatile solution for demanding three-port high-pressure fluid-control applications.
Available Versions
381A10 – Normally Closed
381B10 – Normally Open
Nominal Diameter: DN10
Pressure: 0–100 Bar
Reverse Pressure: Up to 16 Bar
Kv: 2.5 m³/h
Standard Connections:
✓ 1/4" BSP
✓ 3/8" BSP
✓ 1/2" BSP
Optional:
✓ 3/4" BSP
Related Products & Categories
Technical Specification
Brand: RSG regel-und steuergeräte gmbh
Model: 38110
Width: 50.00 mm
Height: 50.00 mm
Depth: 166.50 mm
Weight: 3.00 kg
Valve / Product Type: Air Actuated Valve, Coaxial Valve
Body Material: Brass, Stainless Steel
Port Size: 1/2 thread, 1/4 thread, 3/4 thread, 3/8 thread
Function: 3/2 Normally Closed, 3/2 Normally Open, 3/2 Universal
Operation: Direct Acting
Pressure: 70 Bar, 80 Bar, 90 Bar, 100 Bar
Seals: EPDM, NBR, PTFE (Teflon), FKM (Viton)
Media: Air, Fluid (Non Aggressive), Fluid (Slight Acid/Alkali), Gases (Non Aggressive), Oils + Fuels 50cSt Max, Fluid Thick 51>500cSt, Water, Water (RO/Pure/Demin)
Orifice: 10mm
Options required: Bi-Directional Flow, Manifold, Manual Override, Mounting Bracket, Mounting Holes, Position Feedback Closed, Position Feedback Open+Closed
Found in these Categories
Coax pneumatic valve 3/2 100Bar Brass Stainless 1/4-3/4 DN10
£335.85 incl. VAT £279.88 ex. VAT
-57% Was £787.67 incl. VAT