Valve / Product Type

Air Actuated Valve

air actuated valves that utilise a compressed air supply to operate.

AirLine Fittings + Tube

compressed air line tubing and push to connect fittings

Check Valve

Check + non return valves only allow flow in one direction

Manual + Mechanical Control

Air valves that are controlled manually and mechanically

Safety Shut Off

Safety shut off isolation valve, shuts off and secures air line systems, will vent downstream air when closed.

Solenoid Valve

Valves controlled by electrical signal via a solenoid or electro magnet.

Vacuum Breaker + Generators

valves that release trapped air + vacuum or generate vacuum

Port Size

Media

Body Material

Function

Pressure

Seals

EPDM

EPDM (Ethylene Propylene Diene Monomer) - known as Ethylene Propylene terpolymer, Buna-AP, Dutral, Polysar-EDM, Royalene, Vistalon, Keltan, Epcar, Nordel or Epsyn). Good for hot and drinking water, Steam, Freon refrigerant gas and Air -40°C to +120°C (+150°C steam) Poor resistance to oils + fuels

FKM (Viton)

FKM Fluoro elastomer (Fluorocarbon) Viton® Dupont registered, known as Tecnoflon, Fluorel, Dai-El. Good for hot water, acid, alkali, oils, hydrocarbons and salt solutions, many aggressive chemicals, diluted acids, weak alkali's, mineral oils, aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, sunlight and ozone. -26°C to +205°C. Poor resistance to Ketone's and Acetone.

FFKM (Kalrez)

FF-KM Perfluoroelastomer - known as Kalrez, Chemraz or Perlast. Good most Solvents, Chemicals + excellent resistance to almost every thing, far surpassing FKM. -40°C to +250°C.

HNBR

HNBR (Hydrogenated Nitrile Butadine Rubber) also known as Therban, Zetpol or Tornac). Good for motor oils, sour gas, amine oil mixtures, oxidised fuels, lubricating oils, mineral based hydraulic oil, animal and vegetable oil, diesel fuel, ozone, dilute acids and bases, new bio-oils, H2S Hydrogen Sulphide and C02 carbon dioxide. -40°C to +150°C. Poor for concentrated alkali's, esters, alkyl phosphate, ethers, halogenated solvents, ketone's, halogenated hydrocarbons, solvents and flames.

NBR

NBR (Nitrile Buna Rubber) known as Nitrile Butadine, Buna-N, Hycar, Chemigum, Butakon, Breaon, Butacril, Paracil, Nipol, Perbunan, Krynac or Europrene-N. Good for Aliphatic Hydrocarbons, Petroleum, Fuels, Mineral Oil, Vegetable and Hydraulic Oil, Alcohol and many Acids. -35°C to +100°C. Poor for Ozone, Acetone, Methyl ethyl Ketone, Chlorinated Hydrocarbons, Ethers and Esters.

PTFE (Teflon)

PTFE (Polytetrafluoroethylene) also known as Teflon® Dupont registered. Excellent resistance to almost every fluid or gas. -200°C to +230°C

Silicone

Silicone (VMQ) known as PVMQ, Silastic, Siloprene, Rhodorsil or Silplus. Good resistance to Oil, solvents, aniline alcohol, dilute acids or bases, benzene, toluene, petrol. -60°C to +230°C. Poor resistance Diesel, hot air, steam over 150 C, strong acids and bases.

Voltage

Approval: ATEX,WRAS,IP etc

Orifice

Operation

Direct Acting

Directly controls flow without external pressure assistance operates from vacuum upwards.

Pressure Assisted

Operate via pilot pressure control and require a minimum pressure difference between inlet and outlet from 0.5 Bar.

Options required

Spares (Coils, Connectors, Seals)

Blanking Plug

Fittings

Manifold

Nuts + bolts + plates

Only Show Items In Stock

Hide spare parts

Air Control Valves

3/2 Way Pneumatic Valves

5/2 Way Pneumatic Valves

5/3 Way Pneumatic Valves

Emergency Stop Devices

Air Actuated Pneumatic Valves

Pneumatic Accessories

Filters

1635 IN STOCK

341 IN STOCK

194 IN STOCK

141 IN STOCK

110 IN STOCK

211 IN STOCK

946 IN STOCK

212 IN STOCK

64 IN STOCK

61 IN STOCK

193 IN STOCK

112 IN STOCK

114 IN STOCK

112 IN STOCK

697 IN STOCK

80 IN STOCK

396 IN STOCK

25 IN STOCK

82 IN STOCK

88 IN STOCK