Description
1/8" 316 Stainless Steel High Pressure Solenoid Valve Manifold – ADFS6000
The CS Fluid Power ADFS6000 is a heavy-duty 1/8" BSP 2/2 way normally closed direct acting solenoid valve manifold system, manufactured from 316 stainless steel for high-pressure and demanding industrial fluid control applications.
Designed for pressures from 0 bar up to 150 bar, the ADFS6000 combines individually controlled stainless steel solenoid valves on a common 316 stainless steel manifold. Its direct acting design requires no minimum differential pressure, making it suitable for applications ranging from vacuum and zero-pressure systems through to high-pressure control.
A choice of 1.2mm to 5.0mm orifices, multiple seal materials and three coil options allows the valve to be configured for the required combination of pressure, flow, media and electrical supply. The manufacturer's specification confirms air, water, gas and vacuum service to 10⁻⁶ Torr.
Valve Function & Operation
Function: 2/2 Way Normally Closed
Operation: Direct Acting
Port: 1/8" BSP
Optional Thread: NPT
Minimum Differential Pressure: 0 Bar
Maximum Pressure: Up to 150 Bar / 2250 psi
The actual maximum working pressure depends upon the selected orifice, coil and AC/DC supply.
Pressure, Orifice & Flow Options
1.2mm Orifice – Kv 1.0 L/min
✓ WPG1: 0–60 Bar AC / 0–42 Bar DC
✓ WPG2: 0–120 Bar AC / 0–84 Bar DC
✓ WPA3C: 0–150 Bar AC / 0–105 Bar DC
1.6mm Orifice – Kv 1.3 L/min
✓ WPG1: 0–40 Bar AC / 0–28 Bar DC
✓ WPG2: 0–60 Bar AC / 0–42 Bar DC
✓ WPA3C: 0–80 Bar AC / 0–56 Bar DC
2.0mm Orifice – Kv 1.6 L/min
✓ WPG1: 0–20 Bar AC / 0–15 Bar DC
✓ WPG2: 0–30 Bar AC / 0–21 Bar DC
✓ WPA3C: 0–60 Bar AC / 0–42 Bar DC
3.0mm Orifice – Kv 3.7 L/min
✓ WPG2: 0–20 Bar AC / 0–14 Bar DC
✓ WPA3C: 0–40 Bar AC / 0–28 Bar DC
4.0mm Orifice – Kv 8.3 L/min
✓ WPG2: 0–12 Bar AC / 0–8.4 Bar DC
✓ WPA3C: 0–20 Bar AC / 0–14 Bar DC
5.0mm Orifice – Kv 9.2 L/min
✓ WPG2: 0–10 Bar AC / 0–7 Bar DC
✓ WPA3C: 0–15 Bar AC / 0–10.5 Bar DC
316 Stainless Steel Construction
Body: 316 Stainless Steel
Manifold: 316 Stainless Steel
Tube & Internal Parts: Stainless Steel
The 316 stainless construction makes the ADFS6000 particularly suitable where corrosion resistance, fluid compatibility or environmental conditions make a brass manifold unsuitable. The manufacturer's construction specification confirms a 316 stainless body with stainless tube and internal components.
Seal Options
Available seal materials include:
✓ NBR
✓ EPDM
✓ FKM
✓ Silicone
✓ PTFE
✓ VST
✓ Neoprene
✓ ECO
✓ HNBR
✓ Hypalon
Seal selection should be matched to the media, temperature and required working pressure.
Media & Operating Conditions
Suitable Media:
✓ Compressed Air
✓ Water
✓ Compatible Gases
✓ Vacuum to 10⁻⁶ Torr
✓ Compatible Fluids up to 50 cSt
Ambient Temperature: -20°C to +60°C
Maximum Media Temperature: Up to +180°C depending upon seal
Mounting Position: Any
The maximum media temperature must therefore be considered together with the selected seal material rather than treating +180°C as a universal valve rating.
WPG1 Solenoid Coil
✓ 12W DC
✓ 11.2VA AC Inrush
✓ 8.2VA AC Holding
✓ Class H 180°C
✓ 100% Continuous Duty
✓ DIN 43650 Connection
✓ IP67 With Connector
WPG2 Solenoid Coil
✓ 18W DC
✓ 18.7VA AC Inrush
✓ 15.3VA AC Holding
✓ Class H 180°C
✓ 100% Continuous Duty
✓ DIN 43650 Connection
✓ IP67 With Connector
WPA3C High-Power Coil
✓ 22.6W DC
✓ 37.5VA AC Inrush
✓ 27.5VA AC Holding
✓ Class N 200°C
✓ 100% Continuous Duty
✓ IP54 Enclosure
✓ 30cm Flying Leads
The WPA3C provides the greatest pressure capability and is required for the highest-pressure configurations.
Available Voltages
WPG1:
✓ 12VDC
✓ 24VDC
✓ 48VDC
✓ 24VAC
✓ 48VAC
✓ 110VAC
✓ 230VAC
WPG2:
✓ 12VDC
✓ 24VDC
✓ 48VDC
✓ 24VAC
✓ 48VAC
✓ 110VAC
✓ 230VAC
✓ 380VAC
WPA3C:
✓ 12VDC
✓ 24VDC
✓ 24VAC
✓ 48VAC
✓ 110VAC
✓ 230VAC
Optional ATEX Solenoid Coil
Explosion-protected coil option available for hazardous-area applications:
✓ ATEX II 2G & 2D
✓ EExm II T4
✓ T130°C
✓ IP65
Important: pressure capability with the ATEX operator is the same as the WPG1 12W coil.
Multi-Station Manifold Assembly
The ADFS6000 allows multiple independently controlled high-pressure solenoid valves to be mounted on a common 316 stainless steel manifold, providing a compact centralised fluid control assembly.
Supplied fully assembled with mounting brackets according to the number of stations ordered.
Ordering Instructions
Please add the number of valve stations required to your basket.
✓ Quantity 2 = 2 Station Manifold
✓ Quantity 4 = 4 Station Manifold
✓ Quantity 6 = 6 Station Manifold
✓ Quantity 8 = 8 Station Manifold
✓ Quantity 10 = 10 Station Manifold
For example, if you require a 4 station stainless steel manifold, add quantity 4 to your basket.
Related Products & Categories
