Key Features
- DIN 43650 Form A Connector
- Integrated Bipolar LED
- 12–48V DC + 24V AC Option
- 100–240V AC Option
- 10A Max Operating Current
- 16A Maximum Current Rating
- EN 175301-803 / DIN 43650A
- 2 Pin + Protective Earth
- Standard 28mm Square Format
- 18mm Contact Spacing
- PG9 Cable Entry
- Suitable for 6–8mm Cable
- IP67 Protection
- Transparent PA Housing
- -25°C to +90°C Temperature
Description
DIN 43650 Form A Electrical Connector Bipolar LED – IP67
EN 175301-803 Form A electrical connector with integrated bipolar LED indication and IP67 protection, designed for solenoid valves, solenoid coils and industrial automation equipment operating in demanding environments.
The connector uses the standard DIN 43650A Form A 28mm square interface with 2 pins + protective earth and 18mm contact spacing, providing compatibility with a wide range of industrial solenoid valve coils.
Two wide-voltage versions are available: 12–48V DC including 24V AC, or 100–240V AC, reducing the number of voltage-specific connectors required for different valve installations.
With a maximum operating current of 10A, maximum current rating of 16A and IP67 ingress protection, this connector offers a robust alternative to standard IP65 DIN connectors where additional protection against water and industrial environments is required.
Available Voltage Options
DIN2-LED-DC
Voltage range: 12–48V DC
AC compatibility: 24V AC
Suitable for common control voltages including:
✓ 12V DC
✓ 24V DC
✓ 48V DC
✓ 24V AC
DIN2-LED-AC
Voltage range: 100–240V AC
Suitable for a wide range of mains-powered solenoid valve applications including 110V and 230V AC systems.
Electrical Specification
Connector type: Form A
Standard: EN 175301-803
Alternative standard: DIN 43650A
Connector size: 28mm square
Electrical connection: 2 pins + protective earth
Contact spacing: 18mm
Low-voltage version: 12–48V DC + 24V AC
High-voltage version: 100–240V AC
Maximum voltage: 250V AC / 300V DC
Maximum operating current: 10A
Maximum current rating: 16A
Indicator: Bipolar LED
Insulation class: C – VDE 0110
Bipolar LED Status Indication
The integrated bipolar LED provides clear visual indication when electrical power is being supplied to the connected solenoid valve or coil.
The bipolar arrangement provides greater flexibility than a conventional polarity-dependent LED circuit and allows the appropriate connector version to operate across its specified supply range.
Visible status indication at the valve is particularly useful for:
✓ Electrical fault finding
✓ Machine commissioning
✓ Valve testing
✓ Maintenance
✓ Process monitoring
✓ Identifying energised valves
This can help an engineer quickly establish whether an electrical signal is reaching the solenoid valve before investigating the coil, valve or fluid system.
Wide Voltage Range
A significant advantage of this connector is its wide input voltage capability.
Rather than requiring a separate connector for every individual control voltage, the low-voltage version covers 12V DC through 48V DC plus 24V AC.
A separate high-voltage version covers 100–240V AC, making it suitable for common 110V and 230V AC solenoid valve systems.
This can help simplify OEM component selection and reduce the number of different electrical connectors required in stock.
High Current Capacity
Maximum operating current: 10A
Maximum current rating: 16A
The high current capacity provides substantial electrical headroom compared with many conventional LED DIN connectors and makes the connector suitable for a broad range of compatible industrial solenoid coils.
Actual permissible current should always be considered alongside the connected cable, conductor cross-section, ambient conditions and electrical installation requirements.
IP67 Environmental Protection
Protection: IP67 to EN 60529
The IP67 rating provides a higher degree of environmental protection than conventional IP65 DIN connectors when the connector is correctly assembled to a compatible device.
IP67 provides:
✓ Complete protection against dust ingress
✓ Protection against temporary water immersion
This makes the connector particularly useful for industrial installations exposed to washdown, moisture, water spray, dust or other demanding environmental conditions.
Housing & Construction
Housing: Transparent PA
Connector material: PA66 + 30% FV
Contact material: CuZn (Au)
Operating temperature: -25°C to +90°C
Insulation class: C – VDE 0110
The transparent housing allows the internal connection and LED status to remain clearly visible while providing a durable enclosure for industrial applications.
Cable Connection
Cable entry: PG9
Suitable cable diameter: 6–8mm
The PG9 cable gland provides secure cable retention and environmental sealing when correctly assembled with a suitable 6–8mm diameter electrical cable.
DIN 43650A / EN 175301-803 Form A
The connector uses the widely adopted EN 175301-803 Form A / DIN 43650A electrical interface.
Its standard 28mm square configuration and 18mm contact spacing make it suitable for compatible Form A solenoid coils used across industrial fluid and pneumatic control systems.
Typical Applications
✓ Solenoid valves
✓ Pneumatic control valves
✓ Hydraulic solenoid valves
✓ Water control valves
✓ Process control valves
✓ Industrial automation
✓ OEM machinery
✓ Packaging equipment
✓ Water treatment systems
✓ Outdoor valve installations
✓ Washdown environments
✓ Industrial fluid control
Why Choose This IP67 LED DIN Connector?
This DIN Form A connector combines three particularly useful features: wide voltage compatibility, high current capacity and IP67 environmental protection.
The 12–48V DC / 24V AC version covers several common industrial control voltages with one connector, while the 100–240V AC version covers common mains-powered solenoid valve applications.
An integrated bipolar LED provides immediate visual indication of electrical status, while the 10A maximum operating current and IP67 protection make the connector particularly suitable for demanding industrial installations.
For applications where a conventional IP65 DIN connector does not provide sufficient environmental protection, this IP67 version offers a useful upgrade while retaining the standard DIN 43650A Form A interface.
Related Products & Categories
Technical Specification
Brand: CS Fluid Power Co Ltd
Model: DIN2-LED-AC, DIN2-LED-DC
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.01 kg
Voltage: 12vDC, 24vDC, 24vAC, 48vDC, 110vAC, 230VAC
Approvals:: IP65, IP66, IP67
Spares (Coils, Connectors, Seals): DIN connector Form A
DIN Connector Type: Field Wireable
DIN Connector Circuit: LED
DIN Connector Conduit / Cable Size: 6-8mm Cable
Found in these Categories
Electrical DIN Connector 2P+E Form A LED PG9 (6-8mm) IP67
£4.32 incl. VAT £3.60 ex. VAT
-28% Was £5.97 incl. VAT
Brand: CS Fluid Power Co Ltd
Model: DIN2-LED-AC, DIN2-LED-DC
Stock: 935 in stock
Read Full Description