Brass 90° Outlet Solenoid Valve – Direct Acting 2/2 Way NC – Sunwell DB Series
The Sunwell DB Series is a compact direct acting 2/2 way normally closed brass solenoid valve featuring a unique 90° outlet design. With the outlet positioned at right angles to the inlet, the DB Series provides an ideal solution where installation space is limited or pipework requires a compact right-angle flow path.
Available in 1/4", 3/8" and 1/2" BSP sizes with a wide choice of orifice diameters and four coil power options, the DB Series offers reliable control of water, air, gases, vacuum and light oils without requiring a minimum pressure differential.
Its forged brass body, stainless steel internal components and optional FKM seals provide excellent durability, while optional high-temperature and ATEX coil configurations make the valve suitable for demanding industrial and OEM applications. The compact DB Series is also widely used on 12V and 24VDC vehicle water spraying systems and other applications where a vertical inlet and right-angle outlet simplify installation.
Features & Benefits
✓ Unique 90° outlet configuration
✓ Direct acting zero minimum pressure design
✓ Compact forged brass construction
✓ Four coil power options
✓ Pressure ratings up to 25 Bar
✓ Suitable for vacuum applications
✓ NBR or FKM seal options
✓ Optional high-temperature operation up to +160°C
✓ Optional ATEX certified coils
✓ DIN 43650A/B IP65 electrical connection
✓ Optional BSP or NPT threaded connections
Valve Specification
Function: 2/2 Way Normally Closed
Operation: Direct acting plunger
Port Sizes:
1/4" BSP
3/8" BSP (Compact DB09)
3/8" BSP (Large Body DB10)
1/2" BSP (DB15)
(Optional NPT)
Outlet Configuration: 90° outlet at right angles to inlet
Orifice Options:
2.0 mm
2.5 mm
3.0 mm
3.5 mm
4.0 mm
4.5 mm
5.0 mm
6.0 mm
Flow Factor (Cv): 0.03 to 0.54
(dependent upon orifice size)
Pressure Range: Up to 25 Bar
(dependent upon coil size and orifice)
Vacuum Capability: Suitable for vacuum applications
Maximum Media Viscosity: 50 cSt
Opening Time: 5–20 ms
Closing Time: 10–40 ms
Mounting Position: Any position.
Construction
Body: Forged brass
Internal Parts: Stainless steel
Seal Material:
NBR
FKM
Electrical Connection:
DIN 43650B (Coil 2)
DIN 43650A (Coils 3, 4 & 5)
IP65 connector included
Coil Specification
Coil 2
6 Watt DC
6.9 VA AC
Nass Magnet System 8/22
Class F (155°C)
Coil 3
6.8 Watt DC
8 VA AC
Nass Magnet System 8/30
Class F (155°C)
Coil 4
15 Watt DC
19.5 VA AC
Nass Magnet System 13/30
Class F (155°C)
Coil 5
18.5 Watt DC
23 VA AC
Nass Magnet System 13/36
Class F (155°C)
All coils are 100% continuous duty rated.
Protection: IP65 with connector included
Available Voltages:
12VDC
24VDC
48VDC
24VAC
48VAC
110VAC
230VAC
380VAC (Coil 4 only).
Hazardous Area Options
Optional 22002EX (2E) ATEX coil: 5.2 Watt
Ex mb IIC T4 Gb
Ex mb tb IIIC T130°C Db
Pressure ratings equivalent to Coil 2
Optional 22003EX (3E) ATEX coil: 10.1 Watt
Ex mb IIC T4 Gb
Ex mb tb IIIC T130°C Db
Pressure ratings equivalent to Coil 4
Suitable for Zones 21 & 22.
Media Compatibility
Suitable for:
Air
Water
Gases
Light oils
Vacuum
Most fluids below 50 cSt viscosity
Most gases compatible with the selected seal material and valve construction.
Pressure:
0.02 Bar (20 mBar), 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar, 12 Bar, 13 Bar, 14 Bar, 15 Bar, 16 Bar, 17 Bar, 18 Bar, 20 Bar, 25 Bar
