Key Features
- Form C Micro 9.4mm Pins
- Pre-Wired 2 Metre Cable
- 24V AC/DC Version
- Red LED Indicator
- Integrated VDR / Varistor
- 1.5A Maximum Current
- 3 Core 0.50mm² Cable
- Compact Micro Form C Design
- 6h / 12h Earth Position
- IP67 Protection
- −25°C to +90°C Connector
- Nass Magnet 614-202-0048
Datasheets
Description
DIN Form C Micro 9.4mm LED + VDR Connector 2m IP67
The Nass Magnet 614-202-0048 is a pre-wired DIN Form C Industrial Micro electrical connector with 9.4mm contact spacing, integrated red LED and VDR/varistor surge suppression, supplied with a 2 metre PVC cable.
Designed for compact 24V AC/DC solenoid valves and electromagnetic devices, the moulded connector provides a robust IP67 electrical connection while the integrated LED gives clear visual indication of the energised circuit.
The built-in VDR / varistor suppresses inductive voltage transients generated when a solenoid coil is switched, helping protect associated control equipment and electronics.
Electrical Specification
Connector: Form C Industrial Micro
Contact spacing: 9.4mm
Poles: 2 + 2PE
Earth position: 6h / 12h
Voltage: 24V AC/DC ±15%
Maximum current: 1.5A
Circuit: LED + VDR / Varistor
LED: Red
Suppression: Varistor
Polarity protected: Yes
Contacts: CuZn, Cu/Sn plated
Contact resistance: <15mΩ
Red LED Indicator
The integrated red LED provides immediate visual indication of the electrical circuit status, making fault finding and maintenance easier.
Integrated VDR / Varistor Protection
A built-in voltage-dependent resistor provides suppression of the inductive voltage spike produced when the connected solenoid coil is switched off.
Unlike a conventional flyback diode, a varistor is suitable for both AC and DC operation within the connector's specified voltage rating.
Pre-Wired 2 Metre Cable
The connector is supplied factory moulded to a 2.0 metre black PVC cable.
Cable cores: 3
Conductor size: 3 × 0.50mm²
Core colours: Brown, blue, green/yellow
Cable outside diameter: Approx. 5.1mm
Cable length: 2 metres
Stripped end length: 30mm
Wire ends: Fitted with ferrules
The cable itself is rated −30°C to +80°C when fixed and −5°C to +70°C when moving.
Moulded IP67 Construction
The moulded TPU connector incorporates an integrated TPU seal and stainless-steel central fixing screw.
Moulded material: TPU
Contact carrier: PA6 GF15
Seal: Moulded TPU
Fixing screw: M3 × 22.5mm
Screw material: A2-50 stainless steel
Tightening torque: 0.4 ± 0.1Nm
Protection: IP67 when correctly mounted to the mating component.
Temperature Range
Connector operating temperature: −25°C to +90°C*
Cable fixed: −30°C to +80°C
Cable moving: −5°C to +70°C
*Overall operating temperature is dependent upon the connected cable.
Typical Applications
✓ Compact solenoid valves
✓ Pneumatic directional valves
✓ Process control equipment
✓ Automation machinery
✓ 24VDC control systems
✓ 24VAC solenoid systems
✓ OEM equipment
✓ Industrial valve control
Why Choose the Nass Form C Micro Connector?
This version combines the compact 9.4mm Form C Micro interface with a factory-moulded 2 metre cable, IP67 protection, visual LED indication and integrated transient suppression.
It is particularly useful where a ready-wired, sealed connection is preferable to assembling a conventional field-wireable DIN connector on site.
Related Products & Categories
Technical Specification
Brand: Nass Magnet GmbH
Model: DINC-MICRO-LEDR
Width: 16.00 mm
Height: 22.00 mm
Depth: 16.00 mm
Weight: 0.25 kg
Voltage: 200vDC, 230VAC, 24vAC, 24vDC
Approvals:: IP67
Spares (Coils, Connectors, Seals): DIN connector Form C
DIN Connector Type: Pre-Wired:
DIN Connector Circuit: LED, VDR / Varistor
Found in these Categories
DIN Form C Micro 9.4mm LED + VDR Connector 2m IP67
£9.90 incl. VAT £8.25 ex. VAT
-49% Was £19.58 incl. VAT