Key Features
- Pre-Wired 2m or 5m Cable
- DIN Form B Industrial 11mm
- 230V AC/DC Operation
- Red LED Status Indicator
- Integrated VDR / Varistor
- 1.5A Maximum Current
- 3 Core 0.75mm² Cable
- H05VVF Black Cable
- 2 Pin + Protective Earth
- Integrated Sealing Gasket
- IP67 Protection
- −25°C to +90°C
Description
Pre-Wired DIN Form B 11mm Connector LED VDR 230V IP67
Nass Magnet moulded pre-wired DIN Form B Industrial 11mm electrical connector with integrated red LED indication and VDR / varistor transient protection.
Designed for industrial solenoid valves and other electromagnetic devices using the 11mm Form B Industrial connection, the connector is supplied completely moulded to either a 2 metre or 5 metre 3-core cable, eliminating the need for field wiring at the connector.
The integrated red LED provides immediate visual confirmation of the electrical supply, while the VDR / varistor helps suppress potentially damaging voltage transients generated when an inductive solenoid coil is switched off.
Rated for 230V AC/DC and up to 1.5A, the moulded assembly provides IP67 protection when plugged in and correctly secured, making it particularly suitable for demanding industrial installations where improved environmental sealing is required.
Available Cable Lengths
2 Metre Version
Nass Magnet: 612-202-0172
5 Metre Version
Nass Magnet: 612-202-0175
The two versions have the same electrical specification and construction; only cable length differs.
Electrical Specification
Connector: DIN Form B Industrial
Contact distance: 11mm
Poles: 2 + PE
Protective earth position: 12h
Nominal voltage: 230V
Current type: AC/DC
Maximum current: 1.5A
Indicator: Red LED
Suppressor: VDR / Varistor
Rectifier: None
Contact material: CuZn, zinc plated
Contact resistance: <4mΩ
VDR / Varistor Transient Protection
The integrated VDR / varistor provides transient voltage suppression directly at the solenoid connector.
When an energised solenoid coil is switched off, the collapsing magnetic field can generate a short-duration voltage spike or back EMF. The varistor helps clamp this transient, reducing the electrical stress placed on associated switching and control equipment.
Potential benefits include:
✓ Reduced inductive voltage spikes
✓ Protection of associated electronics
✓ Reduced switching stress
✓ Improved control-system reliability
✓ Suppression located close to the coil
Unlike a conventional flyback diode, the VDR / varistor is non-polarised and is suitable for the specified AC/DC application.
Red LED Status Indication
The integrated red LED provides immediate visual indication that electrical power is present at the connector.
This is particularly useful for commissioning, maintenance and fault finding, allowing an engineer to quickly establish whether an electrical supply is reaching the solenoid valve.
Pre-Wired 2m or 5m Cable
The connector is factory moulded onto black H05VVF 3-core 0.75mm² cable.
Cable cores:
✓ Green/yellow
✓ Brown
✓ Blue
The loose cable end is stripped 30mm and supplied with sleeves ready for connection.
Factory moulding removes the requirement to assemble a cable gland or terminate conductors within the DIN connector, providing a convenient ready-to-install electrical connection.
Moulded IP67 Construction
Unlike conventional field-wireable DIN connectors using a separate housing and cable gland, this version has a PUR moulded translucent body incorporating the cable connection.
Protection is rated IP67 to DIN EN 60529 when plugged and screwed to the compatible counterpart.
This provides improved protection against dust and temporary water immersion compared with a typical IP65 field-wireable connector.
Construction & Materials
Overmoulding: PUR
Housing colour: Translucent
Terminal block: PA6 GF30
Contacts: CuZn, zinc plated
Gasket: Integrated
Central fixing screw: M3 × 24mm
Screw material: Zinc-plated steel 4.8
Fixing torque: 0.4 ±0.1Nm
Ambient temperature: −25°C to +90°C
RoHS: Yes
The integrated gasket and moulded construction are confirmed on both Nass drawings.
DIN Form B Industrial 11mm
The connector uses the 11mm contact-distance Industrial Form B configuration, with two electrical contacts plus protective earth.
This format is commonly used with compact industrial solenoid valves, pneumatic directional valves and other electromagnetic control devices.
Typical Applications
✓ Industrial solenoid valves
✓ Pneumatic solenoid valves
✓ Hydraulic valves
✓ Process control valves
✓ PLC-controlled valves
✓ Industrial automation
✓ OEM machinery
✓ Packaging machinery
✓ Factory automation
✓ Outdoor or wash-down installations
Why Choose the Pre-Wired LED + VDR Connector?
This connector combines factory wiring, visual indication, transient suppression and IP67 environmental protection in one compact assembly.
The pre-wired moulded construction reduces installation time and removes potential errors associated with field assembly, while the red LED provides immediate supply indication and the integrated VDR / varistor helps protect associated control equipment from solenoid switching transients.
With a choice of 2m or 5m cable, 230V AC/DC operation and standard 11mm Industrial Form B interface, it provides a convenient ready-to-install connection for industrial solenoid valve applications.
Related Products & Categories
Technical Specification
Brand: Nass Magnet GmbH
Model: DIN1LEDR
Width: 200.00 mm
Height: 31.50 mm
Depth: 200.00 mm
Weight: 0.40 kg
Voltage: 230VAC, 200vDC
Approvals:: IP65, IP67
Spares (Coils, Connectors, Seals): DIN connector Form B Industrial
DIN Connector Type: Pre-Wired:
DIN Connector Circuit: LED, VDR / Varistor
Found in these Categories
DIN Connector Industrial Form B 11mm LED 2/5 Mtr 230v IP67
£9.90 incl. VAT £8.25 ex. VAT
-56% Was £22.69 incl. VAT