1/2 Stainless Solenoid Valve 0-10 Bar 2/2 Normally Closed


£233.56 incl. VAT
£129.75 ex. VAT

Brand: Kuhnway (Queen)

Model: MD15SCS14M16

Stock: 143 in stock

Read Full Description


1/2 inch Stainless steel Queen solenoid valve MD15CSC14
Function: 2/2 way Normally Closed
Operation: Assisted Lift (Zero rated)
Port: 1/2 BSPT standard, option NPT thread
Pressure: 0 to 10 Bar (Air/Water), 0 to 7 Bar (Oil)
Body: 316 stainless steel 1.4408
Internals: stainless steel
Shading ring: Copper, option without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.
Sealing: EPDM standard; option NBR or FKM.
Media: vacuum (10 Torr with NBR sealing), compressed air, water, light oil, RO or pure water, diesel fuels and most liquids under 50CST and gas compatible with the materials of construction.
Orifice: 16mm
Kv flow factor: 52.9 L/Min water with 1 bar pressure difference.
Coil: M16 26 Watt IP65 CE approved Class F DIN43650A, 100% duty rated.
Coil option: M17 high power Class N DIN43650A IP65 coil, Pressure 0 to 16 Bar, Ambient Temp +50°C
Protection: IP65 with connector (Included)
Voltages: 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC and 230vAC.

Technical Specification

Brand: Kuhnway (Queen)

Model: MD15SCS14M16

Width: 52.00 mm

Height: 112.00 mm

Depth: 70.00 mm

Weight: 0.80 kg

Valve / Product Type: Solenoid

Body Material: Stainless Steel

Voltage: 110vAC, 125vDC, 12vDC, 230VAC, 24vAC, 24vDC, 48vDC

Port Size: 1/2 Inch

Function: 2/2 Normally Closed

Operation: Assisted Lift

Pressure Maximum: 0.1 Bar (100 mBar), 0.2 Bar (200 mBar), 0.3 Bar (300 mBar), 0.4 Bar (400 mBar), 0.5 Bar (500 mBar), 0.6 Bar (600 mbar), 0.7 Bar (700 mBar), 0.8 Bar (800 mBar), 1 Bar, 1.2 Bar, 1.3 Bar, 1.4 Bar, 1.5 Bar, 1.6 Bar, 2 Bar, 2.5 Bar, 3 Bar, 3.5 Bar, 4 Bar, 4.5 Bar, 5 Bar, 5.5 Bar, 6 Bar, 6.5 Bar, 7 Bar, 7.5 Bar, 8 Bar, 8.5 Bar, 9 Bar, 10 Bar

Seals: EPDM, NBR, FKM (Viton)

Approvals: IP65

Media: Air, Fluid >50cSt (Non Aggressive), Fluid >50cSt (Slight Acid/Alkali), Gases (Non Aggressive), Gases (Slight Acid/Alakli), Oils + Fuels >50cSt Max, Vacuum (Low), Water, Water (RO/Pure/Demin)

Options required: Shading Ring - without

Orifice: 15mm


★★★★★4.5 / 5 4 reviews

Tim Malloy


We purchased this valve for use on a water tank system where we required stainless steel. The valve is well built and perfect for the application. We have since purchased some 3/4bsp versions to use on our mains water supply and they have worked just as well. A very good general purpose valve if you require stainless steel.

Reviewed on 03/07/2014

Phil Stephens


Perfect, on line purchase ideal 1/2 BSP 316 stainless steel 0 to 10 bar rated solenoid valve, and EPDM seals are fitted as standard at no extra cost, price is amazingly low but the quality is excellent. I'll be buying more of these 24vDC ones for sure. Hy-lok.

Reviewed on 10/07/2014

Simon B


Fast shipping 5* will come back to this store again.

Reviewed on 29/04/2016



Excellent service. Super fast delivery. quality valve. Highly recommended.

Reviewed on 02/06/2020