100 Bar High Pressure Normally Closed Brass Solenoid Valve – 3/8" & 1/2"
ERA-SIB 100 Bar High Pressure Brass Solenoid Valve
ERA-SIB Series 212240 to 212245 high pressure 2/2 way normally closed brass solenoid valves are designed for reliable control of air, water, light oils and compatible gases at operating pressures up to 100 Bar. Featuring a pressure assisted design with a high-flow 12mm orifice, brass body and stainless steel internal components, these valves provide dependable performance for demanding industrial applications. Optional EPDM, FKM (Viton®) or PTFE sealing materials and ATEX explosion-proof coils are available to suit a wide range of operating conditions.
Key Features
✓ 2/2 way normally closed operation
✓ Pressure assisted servo-operated design
✓ Operating pressures up to 100 Bar
✓ High-flow 12mm orifice
✓ Flow factor: 20 L/min
✓ 1 Bar minimum operating pressure
✓ Brass body construction
✓ Stainless steel internal components
✓ NBR seals as standard
✓ Optional EPDM, FKM (Viton®) or PTFE seals
✓ Suitable for air, water, light oils and compatible gases
✓ Fast 100ms switching time
✓ 14–20 Watt Class F coil
✓ DIN 43650A electrical connection
✓ IP65 protection with connector included
✓ Optional ATEX EEx d IICT6 explosion-proof enclosure
✓ 100% continuous duty rated
✓ Every valve individually tested before dispatch
Typical Applications
High pressure compressed air systems
Industrial water control
Hydraulic support circuits
Pressure testing equipment
Chemical processing
Process control systems
OEM machinery
Hazardous area installations (ATEX option)
Technical Specification
Function: 2/2 way normally closed
Valve Type: Pressure assisted (servo operated)
Port Sizes: 3/8" or 1/2" BSP
Optional Ports: NPT
Orifice: 12mm
Flow Factor: 20 L/min
Minimum Pressure Differential: 1 Bar
Available Pressure Ratings:
1–50 Bar
1–100 Bar
Body Material: Brass
Internal Components: Stainless steel
Seal Materials:
NBR (standard)
EPDM (optional)
FKM (Viton®) (optional)
PTFE (optional)
Suitable Media:
Air
Water
Light oils
Compatible gases
Maximum Media Viscosity: 40 cSt
Media Temperature:
NBR: +60°C
EPDM: +100°C
FKM: +100°C
PTFE: +100°C
Ambient Temperature: -10°C to +50°C
Mounting Position: Vertical, coil uppermost
Performance
Opening Time: 100ms maximum
Closing Time: 100ms maximum
Continuous Duty: 100% ED
Protection Rating: IP65 with connector fitted
Electrical Connection: DIN 43650A
Coil Specification
Power Consumption
DC: 14–20 Watts
AC: 48VA inrush / 24VA holding
Insulation Class: F (155°C)
Moulded resin encapsulated coil
Voltage Options
DC
12VDC
24VDC
48VDC
190VDC
AC
24VAC
48VAC
110VAC
230VAC
50/60Hz
Optional Configurations
NPT threaded ports
PTFE seal version
EPDM seals
FKM (Viton®) seals
ATEX EEx d IICT6 explosion-proof enclosure
Alternative voltages
Why Choose This Valve?
The ERA-SIB 212240–212245 Series combines high flow capacity with dependable operation at pressures up to 100 Bar. Featuring a 12mm orifice and flow factor of 20 L/min, it is ideal for compressed air systems, industrial water control, pressure testing equipment and process applications where higher flow rates are required than smaller high-pressure valves can provide. The robust brass construction, stainless steel internal components and optional PTFE seals or ATEX certification provide a versatile solution for demanding industrial installations.
