Key Features
- DIN 43650 Form A Connector
- 230V Red LED Indicator
- 230V AC Operation
- 1A Maximum Current
- Bipolar LED Circuit
- EN 175301-803 / ISO 4400
- 2 Pin + Protective Earth
- Standard 28mm Square Format
- PG6 Cable Entry
- Suitable for 4–6mm Cable
- Adjustable Earth Position
- 0.5–1.5mm² Conductors
- NBR LABS-Free Seals
- -25°C to +125°C Temperature
Datasheets
Description
230V DIN 43650 Form A Electrical Connector Red LED PG6
230V EN 175301-803 Form A electrical connector with integrated red LED status indication, designed for solenoid valves, solenoid coils and industrial automation equipment.
Using the standard DIN 43650A / ISO 4400 Form A 28mm square interface, the connector provides a 2 pin + protective earth connection and a highly visible red LED to indicate when electrical power is being supplied to the solenoid coil.
This 230V version incorporates a bipolar LED Circuit 01 and is rated for a maximum current of 1A. A PG6 cable entry accepts 4–6mm diameter cable, making this version particularly useful where smaller control cables are being used.
The connector incorporates a robust two-piece black PA6 GF30 polyamide housing with transparent cover, NBR LABS-free sealing components and an adjustable protective earth position.
Electrical Specification
Connector type: Form A
Standard: EN 175301-803
Alternative standards: DIN 43650A / ISO 4400
Connector format: 28mm square
Electrical connection: 2 pin + protective earth
Voltage: 230V
Maximum current: 1A
Circuit: 01
Indicator: Red LED
LED circuit: Bipolar
Drop-off delay: 3ms maximum
Power consumption: 5mA maximum
Contact resistance: 4mΩ maximum
Red LED Status Indication
The integrated red LED provides clear visual indication when electrical power is present at the solenoid valve connector.
This makes it easier for engineers and maintenance personnel to establish whether an electrical supply is reaching the solenoid coil during:
✓ Commissioning
✓ Fault finding
✓ Maintenance
✓ Valve testing
✓ Machine servicing
A visible indication at the valve can help distinguish an electrical supply problem from a mechanical or fluid-control issue during troubleshooting.
LED-Only Circuit
This connector uses the Nass Magnet Circuit 01 bipolar LED arrangement.
It provides visual electrical status indication but, based on the specification supplied for this particular product, does not incorporate a VDR varistor or other dedicated surge-suppression element.
For applications requiring transient suppression as well as LED indication, an appropriate LED + VDR DIN connector should be selected instead.
Housing & Construction
Housing design: Two-piece
Housing material: PA6 GF30 polyamide
Housing colour: Black with clear cover
Contacts: CuZn, Sn/Cu plated
Central fixing screw: Steel 4.8, zinc plated
Seal material: NBR
Seal type: LABS-free
Temperature range: -25°C to +125°C
The transparent upper cover allows the LED indication to remain clearly visible while the polyamide construction provides a durable connection for industrial valve applications.
Cable Connection
Cable entry: PG6
Suitable cable diameter: 4–6mm
Conductor cross-section: 0.5–1.5mm²
Terminal type: Clamping contact with wire-protection plate
The smaller PG6 cable entry distinguishes this connector from the more common PG9/M20 Form A versions and makes it suitable for installations using 4–6mm diameter electrical cable.
For fine-stranded conductors, suitable electrical ferrules should be used to provide a secure and reliable terminal connection.
The conductor cross-sectional area must also be appropriately selected for the electrical load, as conductor size affects maximum permissible current capacity.
Adjustable Earth Position
The protective earth connection is supplied in the 12h position as standard.
The internal terminal arrangement can also be repositioned to provide:
✓ 12h
✓ 3h
✓ 6h
✓ 9h
This provides greater installation flexibility where the orientation of the solenoid coil, valve or electrical cable makes the standard earth position inconvenient.
DIN 43650A / EN 175301-803 Form A
The DIN 43650A connection, now commonly designated EN 175301-803 Form A, is widely used on industrial solenoid valves and coils.
Its standard 28mm square configuration provides a convenient detachable electrical connection for compatible pneumatic, hydraulic and fluid-control solenoid operators.
Typical Applications
✓ 230V solenoid valves
✓ Solenoid valve coils
✓ Pneumatic control valves
✓ Hydraulic solenoid valves
✓ Water control valves
✓ Process control equipment
✓ Industrial automation
✓ Pumps and fluid systems
✓ OEM machinery
✓ Industrial control equipment
Why Choose This 230V LED Connector?
This 230V DIN Form A connector provides a straightforward way to add visible electrical status indication to a compatible solenoid valve.
The integrated red LED allows engineers to see immediately when electrical power is being supplied, while the PG6 cable entry accommodates smaller 4–6mm cables.
Its standard EN 175301-803 / DIN 43650A interface, compact construction and adjustable earth orientation make it a useful replacement or spare connector for industrial 230V solenoid valve installations.
Related Products & Categories
Technical Specification
Brand: Nass Magnet GmbH
Model: DIN2LEDR-PG5-230vAC
Width: 28.00 mm
Height: 31.00 mm
Depth: 28.00 mm
Weight: 0.01 kg
Body Material: Nylon
Voltage: 200vDC, 230VAC
Seals: NBR
Approvals:: IP65
Spares (Coils, Connectors, Seals): DIN connector Form A
Found in these Categories
DIN Electrical Connector Form A LED PG6 (4-6mm) 230v IP65
£3.08 incl. VAT £2.57 ex. VAT
-48% Was £5.87 incl. VAT